VM freezed at booting of FreeBSD-13.0-CURRENT-amd64-20191011-r353427-memstick.img
KIRIYAMA Kazuhiko
kiri at truefc.org
Wed Oct 16 01:02:00 UTC 2019
On Wed, 16 Oct 2019 07:17:04 +0900,
KIRIYAMA Kazuhiko wrote:
>
> On Tue, 15 Oct 2019 19:35:23 +0900,
> KIRIYAMA Kazuhiko wrote:
> >
> > On Tue, 15 Oct 2019 17:07:05 +0900,
> > Simon wrote:
> > >
> > >
> > >
> > > Hi )
> > > May be the same problem.
> > > I said about this here
> > > https://forums.freebsd.org/threads/freebsd-12-0-release-amd64-freeze-boot-from-bhyve-uefi-bhyve_uefi-fd-uefi-gop-screen-goes-blank.69616/
> > > Solution.
> > > Try this
> > > Select
> > > 3 - [Esc]ape to loader prompt
> > > set boot_serial="NO"
> > > boot
> >
> > `vm install' doesn't wait boot loader. So above
> > manupulation could not work. I've specified it to the
> > bhyveload `-e' option like with `-e boot_serial=NO':
> >
> > root at vm:~ # cat /vm/tbedfc/vm-bhyve.log
> > Oct 15 19:27:55: initialising
> > Oct 15 19:27:55: [loader: bhyveload]
> > Oct 15 19:27:55: [cpu: 2]
> > Oct 15 19:27:55: [memory: 8GB]
> > Oct 15 19:27:55: [hostbridge: standard]
> > Oct 15 19:27:55: [com ports: com1]
> > Oct 15 19:27:55: [uuid: 737d1159-ef36-11e9-847a-0cc47ab3cfd4]
> > Oct 15 19:27:55: [utctime: yes]
> > Oct 15 19:27:55: [debug mode: no]
> > Oct 15 19:27:55: [primary disk: disk0.img]
> > Oct 15 19:27:55: [primary disk dev: file]
> > Oct 15 19:27:55: generated static mac 58:9c:fc:02:46:e2 (based on 'tbedfc:0:1571135275:0')
> > Oct 15 19:27:55: initialising network device tap0
> > Oct 15 19:27:55: adding tap0 -> vm-local (local addm)
> > Oct 15 19:27:55: bring up tap0 -> vm-local (local addm)
> > Oct 15 19:27:55: booting
> > Oct 15 19:27:55: bhyveload -m 8GB -e autoboot_delay=3 -e boot_serial=NO -d /vm/.iso/FreeBSD-13.0-CURRENT-amd64-20191011-r353427-memstick.img tbedfc
> > Oct 15 19:27:59: [bhyve options: -c 2 -m 8GB -AHP -U 737d1159-ef36-11e9-847a-0cc47ab3cfd4 -u]
> > Oct 15 19:27:59: [bhyve devices: -s 0,hostbridge -s 31,lpc -s 4:0,virtio-blk,/vm/tbedfc/disk0.img -s 5:0,virtio-net,tap0,mac=58:9c:fc:02:46:e2]
> > Oct 15 19:27:59: [bhyve console: -l com1,stdio]
> > Oct 15 19:27:59: [bhyve iso device: -s 3:0,ahci-hd,/vm/.iso/FreeBSD-13.0-CURRENT-amd64-20191011-r353427-memstick.img]
> > Oct 15 19:27:59: starting bhyve (run 1)
> > Oct 15 19:29:54: bhyve exited with status 1
> > Oct 15 19:29:54: destroying network device tap0
> > Oct 15 19:29:55: stopped
> > root at vm:~ #
> >
> > but also freezed ;-(
>
> I've listed all boot variables at loader prompt:
>
>
> Type '?' for a list of commands, 'help' for more detailed help.
> OK show
> LINES=24
> ansi_caption[1]=^[1mB^[moot Multi User ^[1m[Enter]^[m
> ansi_caption[2]=Boot ^[1mS^[mingle User
> ansi_caption[3]=^[1mEsc^[mape to loader prompt
> ansi_caption[5]=Kernel: default/kernel (1 of 2)
> ansi_caption[5][0]=Kernel: default/kernel (1 of 2)
> ansi_caption[5][1]=Kernel: kernel.old (2 of 2)
> ansi_caption[6]=Configure Boot ^[1mO^[mptions...
> autoboot_delay=NO
> beansi_bootfs=^[1mbootfs: ^[m
> beansi_current=^[1mActive: ^[m
> beansi_page=^[1mP^[mage:
> beansi_pageof= of
> bemenu_bootfs=bootfs:
> bemenu_current=Active:
> bemenu_page=[P]age:
> bemenu_pageof= of
> boot_serial=NO
> bootenv_autolist=YES
> bootenv_root[2]=
> bootenvmenu_command[1]=be_draw_screen 1 goto_menu
> bootenvmenu_command[2]=set_bootenv
> bootenvmenu_command[3]=set_be_page
> beansi_bootfs=^[1mbootfs: ^[m
> beansi_current=^[1mActive: ^[m
> beansi_page=^[1mP^[mage:
> beansi_pageof= of
> bemenu_bootfs=bootfs:
> bemenu_current=Active:
> bemenu_page=[P]age:
> bemenu_pageof= of
> boot_serial=NO
> bootenv_autolist=YES
> bootenv_root[2]=
> bootenvmenu_command[1]=be_draw_screen 1 goto_menu
> bootenvmenu_command[2]=set_bootenv
> bootenvmenu_command[3]=set_be_page
> bootenvmenu_init=init_bootenv
> bootenvmenu_keycode[1]=8
> bootenvmenu_keycode[2]=97
> bootenvmenu_keycode[3]=112
> bootenvmenu_options=4
> bootenvmenu_optionstext=Boot Environments:
> bootfile=kernel
> console=userboot
> currdev=disk0s2a:
> efi_max_resolution=1x1
> hint.acpi_throttle.0.disabled=1
> hint.atkbd.0.at=atkbdc
> hint.atkbd.0.irq=1
> hint.atkbdc.0.at=isa
> hint.atkbdc.0.port=0x060
> hint.atrtc.0.at=isa
> hint.atrtc.0.irq=8
> hint.atrtc.0.port=0x70
> hint.attimer.0.at=isa
> hint.attimer.0.irq=0
> hint.attimer.0.port=0x40
> hint.fd.0.at=fdc0
> hint.fd.0.drive=0
> efi_max_resolution=1x1
> hint.acpi_throttle.0.disabled=1
> hint.atkbd.0.at=atkbdc
> hint.atkbd.0.irq=1
> hint.atkbdc.0.at=isa
> hint.atkbdc.0.port=0x060
> hint.atrtc.0.at=isa
> hint.atrtc.0.irq=8
> hint.atrtc.0.port=0x70
> hint.attimer.0.at=isa
> hint.attimer.0.irq=0
> hint.attimer.0.port=0x40
> hint.fd.0.at=fdc0
> hint.fd.0.drive=0
> hint.fd.1.at=fdc0
> hint.fd.1.drive=1
> hint.fdc.0.at=isa
> hint.fdc.0.drq=2
> hint.fdc.0.irq=6
> hint.fdc.0.port=0x3F0
> hint.p4tcc.0.disabled=1
> hint.ppc.0.at=isa
> hint.ppc.0.irq=7
> hint.psm.0.at=atkbdc
> hint.psm.0.irq=12
> hint.sc.0.at=isa
> hint.sc.0.flags=0x100
> hint.uart.0.at=isa
> hint.uart.0.flags=0x10
> hint.uart.0.irq=4
> hint.uart.0.port=0x3F8
> hint.uart.1.at=isa
> hint.uart.1.irq=3
> hint.uart.1.port=0x2F8
> interpret=OK
> kernel=kernel
> kernel[0]=kernel
> hint.psm.0.at=atkbdc
> hint.psm.0.irq=12
> hint.sc.0.at=isa
> hint.sc.0.flags=0x100
> hint.uart.0.at=isa
> hint.uart.0.flags=0x10
> hint.uart.0.irq=4
> hint.uart.0.port=0x3F8
> hint.uart.1.at=isa
> hint.uart.1.irq=3
> hint.uart.1.port=0x2F8
> interpret=OK
> kernel=kernel
> kernel[0]=kernel
> kernel[1]=kernel.old
> kernel_options=
> kernels_autodetect=NO
> loaddev=disk0s2a:
> loader_conf_files=/boot/device.hints /boot/loader.conf /boot/loader.conf.local
> mainansi_caption[1]=^[1mB^[moot Multi User ^[1m[Enter]^[m
> mainansi_caption[2]=Boot ^[1mS^[mingle User
> mainansi_caption[3]=^[1mEsc^[mape to loader prompt
> mainansi_caption[6]=Configure Boot ^[1mO^[mptions...
> mainmenu_caption[1]=Boot Multi User [Enter]
> mainmenu_caption[2]=Boot [S]ingle User
> mainmenu_caption[3]=[Esc]ape to loader prompt
> mainmenu_caption[6]=Configure Boot [O]ptions...
> mainmenu_command[1]=boot
> mainmenu_command[2]=altboot
> mainmenu_command[3]=goto_prompt
> mainmenu_command[5]=cycle_kernel
> mainmenu_command[6]=2 goto_menu
> mainmenu_init[1]=init_boot
> mainmenu_init[2]=init_altboot
> mainmenu_kernel=5
> mainmenu_keycode[3]=27
> mainmenu_keycode[5]=107
> mainmenu_caption[1]=Boot Multi User [Enter]
> mainmenu_caption[2]=Boot [S]ingle User
> mainmenu_caption[3]=[Esc]ape to loader prompt
> mainmenu_caption[6]=Configure Boot [O]ptions...
> mainmenu_command[1]=boot
> mainmenu_command[2]=altboot
> mainmenu_command[3]=goto_prompt
> mainmenu_command[5]=cycle_kernel
> mainmenu_command[6]=2 goto_menu
> mainmenu_init[1]=init_boot
> mainmenu_init[2]=init_altboot
> mainmenu_kernel=5
> mainmenu_keycode[3]=27
> mainmenu_keycode[5]=107
> mainmenu_keycode[6]=111
> mainmenu_options=5
> mainmenu_reboot=
> maintoggled_ansi[1]=Boot ^[1mS^[mingle User ^[1m[Enter]^[m
> maintoggled_ansi[2]=Boot ^[1mM^[multi User
> maintoggled_text[1]=Boot [S]ingle User [Enter]
> maintoggled_text[2]=Boot [M]ulti User
> menu_caption[1]=Boot Multi User [Enter]
> menu_caption[2]=Boot [S]ingle User
> menu_caption[3]=[Esc]ape to loader prompt
> menu_caption[5]=[K]ernel: kernel (1 of 2)
> menu_caption[5][0]=[K]ernel: kernel (1 of 2)
> menu_caption[5][1]=[K]ernel: kernel.old (2 of 2)
> menu_caption[6]=Configure Boot [O]ptions...
> menu_command[1]=boot
> menu_command[2]=altboot
> menu_command[3]=goto_prompt
> menu_command[5]=cycle_kernel
> menu_command[6]=2 goto_menu
> menu_init[1]=init_boot
> menu_init[2]=init_altboot
> menu_kernel=5
> menu_keycode[1]=98
> menu_caption[3]=[Esc]ape to loader prompt
> menu_caption[5]=[K]ernel: kernel (1 of 2)
> menu_caption[5][0]=[K]ernel: kernel (1 of 2)
> menu_caption[5][1]=[K]ernel: kernel.old (2 of 2)
> menu_caption[6]=Configure Boot [O]ptions...
> menu_command[1]=boot
> menu_command[2]=altboot
> menu_command[3]=goto_prompt
> menu_command[5]=cycle_kernel
> menu_command[6]=2 goto_menu
> menu_init[1]=init_boot
> menu_init[2]=init_altboot
> menu_kernel=5
> menu_keycode[1]=98
> menu_keycode[2]=115
> menu_keycode[3]=27
> menu_keycode[5]=107
> menu_keycode[6]=111
> menu_options=5
> menu_reboot=
> menu_timeout_command=boot
> menuset_initial=1
> menuset_name1=main
> menuset_name2=options
> menuset_name3=bootenv
> module_blacklist=drm drm2 radeonkms i915kms amdgpu
> module_path=/boot/modules;/boot/dtb;/boot/dtb/overlays
> optionsansi_caption[1]=Back to Main Menu ^[1m[Backspace]^[m
> optionsansi_caption[2]=Load System ^[1mD^[mefaults
> optionsansi_caption[3]=^[1mA^[mCPI Support ^[34;1mOff^[m
> optionsansi_caption[4]=Safe ^[1mM^[mode... ^[34;1mOff^[m
> optionsansi_caption[5]=^[1mS^[mingle User. ^[34;1mOff^[m
> optionsansi_caption[6]=^[1mV^[merbose..... ^[34;1mOff^[m
> optionsmenu_acpi=3
> optionsmenu_caption[1]=Back to Main Menu [Backspace]
> optionsmenu_caption[2]=Load System [D]efaults
> optionsmenu_caption[3]=[A]CPI Support off
> menuset_name2=options
> menuset_name3=bootenv
> module_blacklist=drm drm2 radeonkms i915kms amdgpu
> module_path=/boot/modules;/boot/dtb;/boot/dtb/overlays
> optionsansi_caption[1]=Back to Main Menu ^[1m[Backspace]^[m
> optionsansi_caption[2]=Load System ^[1mD^[mefaults
> optionsansi_caption[3]=^[1mA^[mCPI Support ^[34;1mOff^[m
> optionsansi_caption[4]=Safe ^[1mM^[mode... ^[34;1mOff^[m
> optionsansi_caption[5]=^[1mS^[mingle User. ^[34;1mOff^[m
> optionsansi_caption[6]=^[1mV^[merbose..... ^[34;1mOff^[m
> optionsmenu_acpi=3
> optionsmenu_caption[1]=Back to Main Menu [Backspace]
> optionsmenu_caption[2]=Load System [D]efaults
> optionsmenu_caption[3]=[A]CPI Support off
> optionsmenu_caption[4]=Safe [M]ode... off
> optionsmenu_caption[5]=[S]ingle User. off
> optionsmenu_caption[6]=[V]erbose..... off
> optionsmenu_command[1]=1 goto_menu
> optionsmenu_command[2]=set_default_boot_options
> optionsmenu_command[3]=toggle_acpi
> optionsmenu_command[4]=toggle_safemode
> optionsmenu_command[5]=toggle_singleuser
> optionsmenu_command[6]=toggle_verbose
> optionsmenu_init[4]=init_safemode
> optionsmenu_init[5]=init_singleuser
> optionsmenu_init[6]=init_verbose
> optionsmenu_keycode[1]=8
> optionsmenu_keycode[2]=100
> optionsmenu_keycode[3]=97
> optionsmenu_keycode[4]=109
> optionsmenu_keycode[5]=115
> optionsmenu_keycode[6]=118
> optionsmenu_options=3
> optionsmenu_optionstext=Boot Options:
> optionstoggled_ansi[3]=^[1mA^[mCPI Support ^[32;7mOn^[m
> optionstoggled_ansi[4]=Safe ^[1mM^[mode... ^[32;7mOn^[m
> optionstoggled_ansi[5]=^[1mS^[mingle User. ^[32;7mOn^[m
> optionsmenu_caption[5]=[S]ingle User. off
> optionsmenu_caption[6]=[V]erbose..... off
> optionsmenu_command[1]=1 goto_menu
> optionsmenu_command[2]=set_default_boot_options
> optionsmenu_command[3]=toggle_acpi
> optionsmenu_command[4]=toggle_safemode
> optionsmenu_command[5]=toggle_singleuser
> optionsmenu_command[6]=toggle_verbose
> optionsmenu_init[4]=init_safemode
> optionsmenu_init[5]=init_singleuser
> optionsmenu_init[6]=init_verbose
> optionsmenu_keycode[1]=8
> optionsmenu_keycode[2]=100
> optionsmenu_keycode[3]=97
> optionsmenu_keycode[4]=109
> optionsmenu_keycode[5]=115
> optionsmenu_keycode[6]=118
> optionsmenu_options=3
> optionsmenu_optionstext=Boot Options:
> optionstoggled_ansi[3]=^[1mA^[mCPI Support ^[32;7mOn^[m
> optionstoggled_ansi[4]=Safe ^[1mM^[mode... ^[32;7mOn^[m
> optionstoggled_ansi[5]=^[1mS^[mingle User. ^[32;7mOn^[m
> optionstoggled_ansi[6]=^[1mV^[merbose..... ^[32;7mOn^[m
> optionstoggled_text[3]=[A]CPI Support On
> optionstoggled_text[4]=Safe [M]ode... On
> optionstoggled_text[5]=[S]ingle User. On
> optionstoggled_text[6]=[V]erbose..... On
> prompt=${interpret}
> script.lang=forth
> smbios.bios.vendor=BHYVE
> toggled_ansi[1]=Boot ^[1mS^[mingle User ^[1m[Enter]^[m
> toggled_ansi[2]=Boot ^[1mM^[multi User
> toggled_text[1]=Boot [S]ingle User [Enter]
> toggled_text[2]=Boot [M]ulti User
> twiddle_divisor=1
> vfs.mountroot.timeout=10
> zfs_be_currpage=1
> OK
>
> Surely boot_serial changed "NO", but did not booted.
>
> >
> > > Look here
> > > https://lists.freebsd.org/pipermail/freebsd-virtualization/2018-November/006944.html
> > > Simon.
> > > You wrote 15.10.2019, 10:51:08:
> > > > Hi, all
> > > > I'm managing bhyve vm by vm-bhyve-devel (1.3-devel) port
> > > > which I've made by github head [1]. When create 13.0-CURRENT
> > > > vm with FreeBSD-13.0-CURRENT-amd64-20191011-r353427-memstick.img
> > > > as follows:
> > > > vm create -s 16GB -t tmpfile.gpWbtMxa tbedfc
> > > > vm install -f tbedfc
> > > > FreeBSD-13.0-CURRENT-amd64-20191011-r353427-memstick.img < /dev/null
> > > > where /vm/.templates/tmpfile.gpWbtMxa is
> > > > loader="bhyveload"
> > > > cpu=2
> > > > memory=8GB
> > > > network0_type="virtio-net"
> > > > network0_switch=local
> > > > disk0_type="virtio-blk"
> > > > disk0_name="disk0.img"
> > > > storage=16GB
> > > > But in install to image, boot freezed at:
> > > > | ____| | _ \ / ____| __ \
> > > > | |___ _ __ ___ ___ | |_) | (___ | | | |
> > > > | ___| '__/ _ \/ _ \| _ < \___ \| | | |
> > > > | | | | | __/ __/| |_) |____) | |__| |
> > > > | | | | | | || | | |
> > > > |_| |_| \___|\___||____/|_____/|_____/ ```
> > > > s` `.....---.......--.``` -/
> > > > +============Welcome to FreeBSD===========+ +o .--` /y:` +.
> > > > | | yo`:. :o `+-
> > > > | 1. Boot Multi User [Enter] | y/ -/` -o/
> > > > | 2. Boot [S]ingle*User | .- ::/sy+:.
> > > > | 3. [Esc]ape to loader prompt | / `-- /
> > > > | 4. Reboot | `: :`
> > > > | | `: :`
> > > > | Options: | /
> > > > | 5. [K]ernel: kernel (1 of 2) | .- -.
> > > > | 6. Configure Boot [O]ptions... | -- -.
> > > > | | `:` `:`
> > > > | | .-- `--.
> > > > | | .---.....----.
> > > > +=========================================+
> > > >
> > > > /boot/kernel/kernel text=0x153f9c0 data=0xe0 data=0x8007c0 syms=[0x8+0x1722d8+0x8+0x190cb2]
> > > > Booting...
This is not the case for 13.0-CURRENT but also 11.3-STABLE
and 12.1-PRERELEASE:
root at vm:/.dake/bds # vm create -s 16GB -t tbedf tbedfc
root at vm:/.dake/bds # vm install -f tbedfc FreeBSD-11.3-STABLE-amd64-20191011-r353406-memstick.img
______ ____ _____ _____
| ____| | _ \ / ____| __ \
| |___ _ __ ___ ___ | |_) | (___ | | | |
| ___| '__/ _ \/ _ \| _ < \___ \| | | |
| | | | | __/ __/| |_) |____) | |__| |
| | | | | | || | | |
|_| |_| \___|\___||____/|_____/|_____/ ``` `
s` `.....---.......--.``` -/
+============Welcome to FreeBSD===========+ +o .--` /y:` +.
| | yo`:. :o `+-
| 1. Boot Multi User [Enter] | y/ -/` -o/
| 2. Boot [S]ingle User | .- ::/sy+:.
| 3. [Esc]ape to loader prompt | / `-- /
| 4. Reboot | `: :`
| | `: :`
| Options: | / /
| 5. [K]ernel: kernel (1 of 2) | .- -.
| 6. Configure Boot [O]ptions... | -- -.
| | `:` `:`
| | .-- `--.
| | .---.....----.
+=========================================+
|
To get back to the menu, type `menu' and press ENTER
or type `boot' and press ENTER to start FreeBSD.
Type '?' for a list of commands, 'help' for more detailed help.
OK boot
/boot/kernel/kernel text=0x1579008 data=0x145db0+0x4cdea0 syms=[0x8+0x16e168+0x8+0x187010]
Booting...
\
root at vm:~ # cat /vm/tbedfc/vm-bhyve.log
Oct 16 09:34:46: initialising
Oct 16 09:34:46: [loader: bhyveload]
Oct 16 09:34:46: [cpu: 4]
Oct 16 09:34:46: [memory: 4G]
Oct 16 09:34:46: [hostbridge: standard]
Oct 16 09:34:46: [com ports: com1]
Oct 16 09:34:46: [uuid: b5986048-efac-11e9-847a-0cc47ab3cfd4]
Oct 16 09:34:46: [utctime: yes]
Oct 16 09:34:46: [debug mode: no]
Oct 16 09:34:46: [primary disk: disk0.img]
Oct 16 09:34:46: [primary disk dev: file]
Oct 16 09:34:46: generated static mac 58:9c:fc:05:a3:5e (based on 'tbedfc:0:1571186086:0')
Oct 16 09:34:46: initialising network device tap0
Oct 16 09:34:46: adding tap0 -> vm-local (local addm)
Oct 16 09:34:46: bring up tap0 -> vm-local (local addm)
Oct 16 09:34:46: booting
Oct 16 09:34:46: bhyveload -m 4G -e autoboot_delay=20 -e boot_serial=NO -d /vm/.iso/FreeBSD-11.3-STABLE-amd64-20191011-r353406-memstick.img tbedfc
Oct 16 09:35:21: [bhyve options: -c 4 -m 4G -AHP -U b5986048-efac-11e9-847a-0cc47ab3cfd4 -u]
Oct 16 09:35:21: [bhyve devices: -s 0,hostbridge -s 31,lpc -s 4:0,virtio-blk,/vm/tbedfc/disk0.img -s 5:0,virtio-net,tap0,mac=58:9c:fc:05:a3:5e]
Oct 16 09:35:21: [bhyve console: -l com1,stdio]
Oct 16 09:35:21: [bhyve iso device: -s 3:0,ahci-hd,/vm/.iso/FreeBSD-11.3-STABLE-amd64-20191011-r353406-memstick.img]
Oct 16 09:35:21: starting bhyve (run 1)
root at vm:~ # vm create -s 16GB -t tbedf tbedfc
root at vm:/.dake/bds # vm install -f tbedfc FreeBSD-12.1-PRERELEASE-amd64-20190913-r352266-memstick.img
| ______ ____ _____ _____
| ____| | _ \ / ____| __ \
| |___ _ __ ___ ___ | |_) | (___ | | | |
| ___| '__/ _ \/ _ \| _ < \___ \| | | |
| | | | | __/ __/| |_) |____) | |__| |
| | | | | | || | | |
|_| |_| \___|\___||____/|_____/|_____/
``` `
Welcome to FreeBSD s` `.....---.......--.``` -/
+o .--` /y:` +.
1. Boot Multi user [Enter] yo`:. :o `+-
2. Boot Single user y/ -/` -o/
3. Escape to loader prompt .- ::/sy+:.
4. Reboot / `-- /
`: :`
Options: `: :`
5. Kernel: default/2kernel (1 of 1) / /
6. Boot Options .- -.
-- -.
`:` `:`
.-- `--.
.---.....----.
Exiting menu!
Type '?' for a list of commands, 'help' for more detailed help.
OK show
LINES=24
autoboot_delay=NO
boot_serial=NO
bootenv_autolist=YES
bootfile=kernel
console=userboot
currdev=disk0s2a:
efi_max_resolution=1x1
hint.acpi_throttle.0.disabled=1
hint.atkbd.0.at=atkbdc
hint.atkbd.0.irq=1
hint.atkbdc.0.at=isa
hint.atkbdc.0.port=0x060
hint.atrtc.0.at=isa
hint.atrtc.0.irq=8
hint.atrtc.0.port=0x70
hint.attimer.0.at=isa
hint.attimer.0.irq=0
hint.attimer.0.port=0x40
hint.fd.0.at=fdc0
hint.fd.0.drive=0
hint.fd.1.at=fdc0
hint.fd.1.drive=1
hint.fdc.0.at=isa
hint.fdc.0.drq=2
hint.fdc.0.irq=6
hint.fdc.0.port=0x3F0
hint.p4tcc.0.disabled=1
hint.ppc.0.at=isa
hint.ppc.0.irq=7
hint.psm.0.at=atkbdc
hint.psm.0.irq=12
hint.sc.0.at=isa
hint.sc.0.flags=0x100
hint.uart.0.at=isa
hint.uart.0.flags=0x10
hint.uart.0.irq=4
hint.uart.0.port=0x3F8
hint.uart.1.at=isa
hint.uart.1.irq=3
hint.uart.1.port=0x2F8
interpret=OK
kernel=kernel
kernel_options=
kernels_autodetect=NO
loaddev=disk0s2a:
loader_conf_files=/boot/device.hints /boot/loader.conf /boot/loader.conf.local
module_blacklist=drm drm2 radeonkms i915kms amdgpu
module_path=/boot/modules;/boot/dtb;/boot/dtb/overlays
nextboot_conf=/boot/nextboot.conf
nextboot_enable=NO
prompt=${interpret}
script.lang=lua
smbios.bios.vendor=BHYVE
twiddle_divisor=1
verbose_loading=NO
vfs.mountroot.timeout=10
OK boot
Loading kernel...
/boot/kernel/kernel text=0x168eb51 data=0x1d0a68+0x768d80 syms=[0x8+0x178b00+0x8+0x196889]
Loading configured modules...
can't find '/boot/entropy'
-
root at vm:~ # cat /vm/tbedfc/vm-bhyve.log
Oct 16 09:45:18: initialising
Oct 16 09:45:18: [loader: bhyveload]
Oct 16 09:45:18: [cpu: 4]
Oct 16 09:45:18: [memory: 4G]
Oct 16 09:45:18: [hostbridge: standard]
Oct 16 09:45:18: [com ports: com1]
Oct 16 09:45:18: [uuid: 20fbd3ef-efae-11e9-847a-0cc47ab3cfd4]
Oct 16 09:45:18: [utctime: yes]
Oct 16 09:45:18: [debug mode: no]
Oct 16 09:45:18: [primary disk: disk0.img]
Oct 16 09:45:18: [primary disk dev: file]
Oct 16 09:45:18: generated static mac 58:9c:fc:01:c9:dd (based on 'tbedfc:0:1571186718:0')
Oct 16 09:45:18: initialising network device tap0
Oct 16 09:45:18: adding tap0 -> vm-local (local addm)
Oct 16 09:45:18: bring up tap0 -> vm-local (local addm)
Oct 16 09:45:18: booting
Oct 16 09:45:18: bhyveload -m 4G -e autoboot_delay=20 -e boot_serial=NO -d /vm/.iso/FreeBSD-12.1-PRERELEASE-amd64-20190913-r352266-memstick.img tbedfc
Oct 16 09:47:06: [bhyve options: -c 4 -m 4G -AHP -U 20fbd3ef-efae-11e9-847a-0cc47ab3cfd4 -u]
Oct 16 09:47:06: [bhyve devices: -s 0,hostbridge -s 31,lpc -s 4:0,virtio-blk,/vm/tbedfc/disk0.img -s 5:0,virtio-net,tap0,mac=58:9c:fc:01:c9:dd]
Oct 16 09:47:06: [bhyve console: -l com1,stdio]
Oct 16 09:47:06: [bhyve iso device: -s 3:0,ahci-hd,/vm/.iso/FreeBSD-12.1-PRERELEASE-amd64-20190913-r352266-memstick.img]
Oct 16 09:47:06: starting bhyve (run 1)
Oct 16 09:47:36: bhyve exited with status 1
Oct 16 09:47:36: destroying network device tap0
Oct 16 09:47:37: stopped
root at vm:~ #
For 11.3-STABLE, `show' in boot prompt disturb termcap and
could not display loader settings. This problem cause from
bhyveload options or any bugs of bhyveload ?
> > > > -
> > > > Using same image, I installed my note PC successfully. In
> > > > above state,
> > > > root at vm:~ # cat /vm/tbedfc/tbedfc.conf
> > > > loader="bhyveload"
> > > > cpu=2
> > > > memory=8GB
> > > > network0_type="virtio-net"
> > > > network0_switch=local
> > > > disk0_type="virtio-blk"
> > > > disk0_name="disk0.img"
> > > > storage=16GB
> > > > uuid="90a693df-ef1e-11e9-847a-0cc47ab3cfd4"
> > > > network0_mac="58:9c:fc:0b:65:c9"
> > > > root at vm:~ # cat /vm/tbedfc/vm-bhyve.log
> > > > Oct 15 16:36:56: initialising
> > > > Oct 15 16:36:56: [loader: bhyveload]
> > > > Oct 15 16:36:56: [cpu: 2]
> > > > Oct 15 16:36:56: [memory: 8GB]
> > > > Oct 15 16:36:56: [hostbridge: standard]
> > > > Oct 15 16:36:56: [com ports: com1]
> > > > Oct 15 16:36:56: [uuid: 90a693df-ef1e-11e9-847a-0cc47ab3cfd4]
> > > > Oct 15 16:36:56: [utctime: yes]
> > > > Oct 15 16:36:56: [debug mode: no]
> > > > Oct 15 16:36:56: [primary disk: disk0.img]
> > > > Oct 15 16:36:56: [primary disk dev: file]
> > > > Oct 15 16:36:56: generated static mac 58:9c:fc:0b:65:c9 (based on 'tbedfc:0:1571125016:0')
> > > > Oct 15 16:36:56: initialising network device tap0
> > > > Oct 15 16:36:56: adding tap0 -> vm-local (local addm)
> > > > Oct 15 16:36:56: bring up tap0 -> vm-local (local addm)
> > > > Oct 15 16:36:56: booting
> > > > Oct 15 16:36:56: bhyveload -m 8GB -e autoboot_delay=3 -d
> > > > /vm/.iso/FreeBSD-13.0-CURRENT-amd64-20191011-r353427-memstick.img tbedfc
> > > > Oct 15 16:37:00: [bhyve options: -c 2 -m 8GB -AHP -U
> > > > 90a693df-ef1e-11e9-847a-0cc47ab3cfd4 -u]
> > > > Oct 15 16:37:00: [bhyve devices: -s 0,hostbridge -s 31,lpc -s
> > > > 4:0,virtio-blk,/vm/tbedfc/disk0.img -s
> > > > 5:0,virtio-net,tap0,mac=58:9c:fc:0b:65:c9]
> > > > Oct 15 16:37:00: [bhyve console: -l com1,stdio]
> > > > Oct 15 16:37:00: [bhyve iso device: -s
> > > > 3:0,ahci-hd,/vm/.iso/FreeBSD-13.0-CURRENT-amd64-20191011-r353427-memstick.img]
> > > > Oct 15 16:37:00: starting bhyve (run 1)
> > > > root at vm:~ # uname -a
> > > > FreeBSD vm.truefc.org 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r353025:
> > > > Thu Oct 3 19:38:47 JST 2019
> > > > admin at vm.truefc.org:/ds/obj/current/13.0/r353025/ds/src/current/13.0/r353025/amd64.amd64/sys/GENERIC
> > > amd64
> > > > root at vm:~ # ifconfig
> > > > igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
> > > >
> > > >
> > > options=4e523bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
> > > > ether 0c:c4:7a:b3:cf:d4
> > > > inet xxx.xxx.xx.xx netmask 0xfffffff8 broadcast xxx.xxx.xx.xx
> > > > media: Ethernet autoselect (1000baseT <full-duplex>)
> > > > status: active
> > > > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> > > > igb1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
> > > >
> > > >
> > > options=4a520b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,NOMAP>
> > > > ether 0c:c4:7a:b3:cf:d5
> > > > inet 192.168.1.17 netmask 0xffffff00 broadcast 192.168.1.255
> > > > media: Ethernet autoselect (1000baseT <full-duplex>)
> > > > status: active
> > > > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> > > > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
> > > >
> > > > options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
> > > > inet6 ::1 prefixlen 128
> > > > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
> > > > inet 127.0.0.1 netmask 0xff000000
> > > > groups: lo
> > > > nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
> > > > vm-public: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> > > > ether c6:ed:62:0a:b0:4e
> > > > id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
> > > > maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
> > > > root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
> > > > member: igb0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> > > > ifmaxaddr 0 port 1 priority 128 path cost 20000
> > > > groups: bridge vm-switch viid-4c918@
> > > > nd6 options=1<PERFORMNUD>
> > > > vm-local: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> > > > ether 8a:d0:25:7d:f7:51
> > > > id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
> > > > maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
> > > > root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
> > > > member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> > > > ifmaxaddr 0 port 6 priority 128 path cost 2000000
> > > > member: igb1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
> > > > ifmaxaddr 0 port 2 priority 128 path cost 20000
> > > > groups: bridge vm-switch viid-f5dda@
> > > > nd6 options=1<PERFORMNUD>
> > > > tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
> > > > description: vmnet-tbedfc-0-local
> > > > options=80000<LINKSTATE>
> > > > ether 58:9c:fc:10:ff:df
> > > > groups: tap vm-port
> > > > media: Ethernet autoselect
> > > > status: active
> > > > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> > > > Opened by PID 85496
> > > > root at vm:~ #
> > > > Whats' wrong ? BTW 12.1-PRERELEASE(r352368) and
> > > > 12.0-RELEASE-p10(r352368) are nothing happened.
> > > > [1]
> > > > https://github.com/TrueFC/ports/tree/master/sysutils/vm-bhyve-devel
> > > > ---
> > > > KIRIYAMA Kazuhiko
> > > > _______________________________________________
> > > > freebsd-virtualization at freebsd.org mailing list
> > > > https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
> > > > To unsubscribe, send any mail to
> > > > "freebsd-virtualization-unsubscribe at freebsd.org"
> > >
> > >
> > ---
> > KIRIYAMA Kazuhiko
> >
> ---
> KIRIYAMA Kazuhiko
>
More information about the freebsd-virtualization
mailing list