Issues with GTX960 on CentOS7 using bhyve PCI passthru (FreeBSD 11-RC2)
soralx at cydem.org
soralx at cydem.org
Wed Jan 11 09:45:51 UTC 2017
> The problem appears to be in the area of assigning memory-mapped
> I/O ranges by bhyve for the VGA card to a region outside of the
> CPU's addressable space; i.e., bhyve does not check CPUID's
> 0x80000008 AL value (0x27 for my CPU, which is 39 bits -- while
> bhyve assigns 0xd000000000 & above for the large Prefetch Memory
> chunks, which requires 40 address bits). At least this is my
> understanding of why VGA passthrough does not work.
To test this, I tried writing to PCI BARs in FreeBSD guest using
`pciconf -w`. Not much use that was: I could read back the values
written to the registers (e.g., `pciconf -r pci0:0:4:0 0x14:48`),
but `pciconf -lvb` still showed the same huge base addresses --
they did not want to change.
OK, I had enough of that. So I went to dig in the source, and
changed the "#define PCI_EMUL_MEMBASE64" from '0xD000000000UL'
to '0x3400000000UL' in src/usr.sbin/bhyve/pci_emul.c. Recompiled
bhyve, booted up FreeBSD, and:
# pciconf -lvb
[...]
vgapci0 at pci0:0:4:0: class=0x030000 card=0x084a10de chip=0x0dd810de rev=0xa1 hdr=0x00
vendor = 'NVIDIA Corporation'
device = 'GF106GL [Quadro 2000]'
class = display
subclass = VGA
bar [10] = type Memory, range 32, base 0xc2000000, size 33554432, enabled
bar [14] = type Prefetchable Memory, range 64, base 0x3400000000, size 134217728, enabled
bar [1c] = type Prefetchable Memory, range 64, base 0x3408000000, size 67108864, enabled
bar [24] = type I/O Port, range 32, base 0x2080, size 128, enabled
...a-a-and:
# kldload nvidia-modeset
Linux ELF exec handler installed
nvidia0: <Quadro 2000> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 269 to local APIC 3 vector 51
vgapci0: using IRQ 269 for MSI
vgapci0: child nvidia0 requested pci_enable_io
random: harvesting attach, 8 bytes (4 bits) from nvidia0
# nvidia-smi
acquiring duplicate lock of same type: "os.lock_sx"
1st os.lock_sx @ nvidia_os.c:599
2nd os.lock_sx @ nvidia_os.c:599
stack backtrace:
#0 0xffffffff80aa6780 at witness_debugger+0x70
#1 0xffffffff80aa6683 at witness_checkorder+0xde3
#2 0xffffffff80a4fac2 at _sx_xlock+0x72
#3 0xffffffff82a515c2 at os_acquire_mutex+0x32
#4 0xffffffff82a21068 at _nv016673rm+0x18
Tue Jan 10 17:06:48 2017
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 367.44 Driver Version: 367.44 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 Quadro 2000 Off | 0000:00:04.0 Off | N/A |
| 30% 35C P8 N/A / N/A | 0MiB / 963MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| No running processes found |
+-----------------------------------------------------------------------------+
Beauty! It's very slow to execute, though. And Xorg is not in a hurry
to start working:
[ 204.724] (--) PCI:*(0:0:4:0) 10de:0dd8:10de:084a rev 161, Mem @ 0xc2000000/33554432, 0x3400000000/134217728, 0x3408000000/67108864, I/O @ 0x00002080/128, BIOS @ 0x????????/65536
[...]
[ 204.736] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 204.736] (==) NVIDIA(0): RGB weight 888
[ 204.736] (==) NVIDIA(0): Default visual is TrueColor
[ 204.736] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 204.738] (**) NVIDIA(0): Enabling 2D acceleration
[ 213.674] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:0:4:0
[ 213.674] (--) NVIDIA(0): CRT-0
[ 213.674] (--) NVIDIA(0): DFP-0 (boot)
[ 213.674] (--) NVIDIA(0): DFP-1
[ 213.674] (--) NVIDIA(0): DFP-2
[ 213.674] (--) NVIDIA(0): DFP-3
[ 213.675] (--) NVIDIA(0): DFP-4
[ 213.698] (--) NVIDIA(0): CRT-0: disconnected
[ 213.698] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 213.698] (--) NVIDIA(0):
[ 213.743] (--) NVIDIA(0): DELL 2007FP (DFP-0): connected
[ 213.743] (--) NVIDIA(0): DELL 2007FP (DFP-0): Internal TMDS
[ 213.743] (--) NVIDIA(0): DELL 2007FP (DFP-0): 330.0 MHz maximum pixel clock
[...]
[ 213.747] (II) NVIDIA(0): NVIDIA GPU Quadro 2000 (GF106GL) at PCI:0:4:0 (GPU-0)
[ 213.747] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 213.747] (--) NVIDIA(0): VideoBIOS: 70.06.0d.00.02
[ 213.747] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 213.748] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 213.748] (**) NVIDIA(0): device DELL 2007FP (DFP-0) (Using EDID frequencies has
[ 213.748] (**) NVIDIA(0): been enabled on all display devices.)
[...]
[ 213.751] (II) NVIDIA(0): Virtual screen size determined to be 1600 x 1200
[ 213.761] (--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
[ 213.761] (--) NVIDIA(0): option
[ 213.761] (--) Depth 24 pixmap format is 32 bpp
[ 213.767] (II) NVIDIA: Reserving 12288.00 MB of virtual memory for indirect memory
[ 213.767] (II) NVIDIA: access.
[ 216.789] (EE) NVIDIA(GPU-0): Failed to initialize DMA.
[ 216.789] (EE) *** Aborting ***
[ 216.791] (EE) NVIDIA(0): Failed to allocate push buffer
[ 216.839] (EE)
Fatal server error:
[ 216.839] (EE) AddScreen/ScreenInit failed for driver 0
Linux still doesn't work (curse Ubuntu! what a mess. It tried to start
Xorg at boot, so I managed to disable that, but no matter what, I
couldn't stop it from trying to run 'nvidia-smi' at boot! And trust me,
I tried a lot. I removed all the scripts related to nvidia, /etc/udev/
is basically empty [/etc just looks like a pile-up of crap, wow!], yet
/usr/bin/nvidia-smi still tried to run by itself until I moved it away).
dmesg:
[ 1.390957] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 1.394715] nvidia 0000:00:04.0: can't derive routing for PCI INT A
[ 1.395185] nvidia 0000:00:04.0: PCI INT A: no GSI
[ 1.414173] vgaarb: device changed decodes: PCI:0000:00:04.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 1.417062] nvidia-nvlink: Nvlink Core is being initialized, major device number 247
[ 1.417609] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 375.26 Thu Dec 8 18:36:43 PST 2016 (using threaded interrupts)
[ 1.419820] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 375.26 Thu Dec 8 18:04:14 PST 2016
[ 1.422067] [drm] [nvidia-drm] [GPU ID 0x00000004] Loading driver
[...]
[ 3.904893] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 246
# lspci -vvn
00:04.0 0300: 10de:0dd8 (rev a1) (prog-if 00 [VGA controller])
Subsystem: 10de:084a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c2000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at 3400000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at 3408000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at 2080 [size=128]
[virtual] Expansion ROM at c0080000 [disabled] [size=512K]
[...]
But:
# ./nvidia-smi
No devices were found
dmesg:
[ 173.498953] NVRM: RmInitAdapter failed! (0x53:0x3:1856)
[ 173.499115] NVRM: rm_init_adapter failed for device bearing minor number 0
Not sure what's happening. But I'll try with AMD/ATI card.
--
[SorAlx] ridin' VN2000 Classic LT
More information about the freebsd-virtualization
mailing list