sr-iov issues, reset_hw() failed with error -100

Ultima ultima1252 at
Thu Feb 25 01:12:42 UTC 2016

 Yeah, still getting the -100 error, I do have sendmail disabled. I just
tested with sendmail up and running then add the VF's and it still shows
the error message.

On Wed, Feb 24, 2016 at 8:04 PM, Eric Joyner <ricera10 at> wrote:

> Are you still getting the -100 errors when trying to load the VF driver?
> I've tried SR-IOV on a system here, and I can confirm that traffic stops
> passing on the PF interface when you create a VF interface. That didn't
> used to happen, so I'm investigating why that is right now.
> On Wed, Feb 24, 2016 at 8:09 AM Ultima <ultima1252 at> wrote:
>>  Decided to do some more tests, I actually have a second board with sr-iov
>> capabilities that I used for awhile with vmware esxi. I decided to test
>> this out and unfortunately it won't activate, it is giving the no space
>> left on device error message. I double checked bios and all VT-d related
>> options are enabled and have hw.ix.num_queues="4" in /boot/loader.conf. Is
>> there anything else that may need to be set? .(It did work on vmware)
>>  For my second test, I moved the X540-AT1 to the board with the X540-AT2.
>> It functioned with the same issues as the AT2 tho.
>> I don't think I listed the motherboards in question yet so ill list them
>> now.
>> S1200BTLRM -
>> MD80-TM0
>> <>
>> -
>> I'm not sure if it will be of any help tho.
>> Ultima
>> _______________________________________________
>> freebsd-current at mailing list
>> To unsubscribe, send any mail to "freebsd-current-unsubscribe at
>> "

More information about the freebsd-virtualization mailing list