Problem hiding USB host controller
Luis P. Mendes
luislupe at gmail.com
Thu Apr 9 20:43:16 UTC 2015
Hi,
I'm trying to passthrough a USB host controller (2.0 or 3.0) but there
seems to be some kind of problem.
# uname -a
FreeBSD leao 10.1-STABLE FreeBSD 10.1-STABLE #0 r279201: Mon Feb 23
18:55:46 UTC 2015
root at releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
VT-d is enabled in bios.
CPU is a Intel Xeon E3-1246v3 Haswell
# cat /boot/loader.conf
# load radeon firmware not presented
pptdevs="0/26/0 1/0/0 0/20/0"
blackhole_load="YES"
# pciconf -lv
# only relevant
ehci0 at pci0:0:26:0: class=0x0c0320 card=0x8c2d1849 chip=0x8c2d8086
rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point USB Enhanced Host Controller'
class = serial bus
subclass = USB
xhci0 at pci0:0:20:0: class=0x0c0330 card=0x8c311849 chip=0x8c318086
rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Lynx Point USB xHCI Host Controller'
class = serial bus
subclass = USB
ppt0 at pci0:1:0:0: class=0x010601 card=0x91721849 chip=0x91721b4b
rev=0x11 hdr=0x00
Only the 1:0:0 disk controler is hidden. The two USB controllers, one
ehci and one xhci are not.
Why don't the controllers get hidden?
Is the blackhole_load="YES" still relevant? I tried with and without
that line to no avail.
Is my STABLE version too old?
Luis
PS. Keep up the excellent work bringing
More information about the freebsd-virtualization
mailing list