bhyve: Unsupported MSI-X configuration: 2/0/0

[Nikos Vassiliadis]

Hi,

On 11/30/14 02:43, Neel Natu wrote:
> Can you provide the output of 'pciconf -lvbc pci0:3:0:0' on the FreeBSD host?
>
> This is assuming pci0:3:0:0 is the wlan device being passed through
> based on an earlier email.

Yes, it is. Here is the output:
> none0 at pci0:3:0:0:       class=0x028000 card=0xe042105b chip=0x472714e4 rev=0x01 hdr=0x00
>     vendor     = 'Broadcom Corporation'
>     device     = 'BCM4313 802.11b/g/n Wireless LAN Controller'
>     class      = network
>     bar   [10] = type Memory, range 64, base 0xb3500000, size 16384, enabled
>     cap 01[40] = powerspec 3  supports D0 D1 D2 D3  current D0
>     cap 09[58] = vendor (length 120)
>     cap 05[48] = MSI supports 1 message, 64 bit
>     cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
>                  speed 2.5(2.5) ASPM L1(L1)
>     ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
>     ecap 0002[13c] = VC 1 max VC0
>     ecap 0003[160] = Serial 1 0000dcffff210c84
>     ecap 0004[16c] = Power Budgeting 1

Thanks, Nikos