bhyverun - mptable/smbios table requires mapped mem

[Paul Chakravarti]

s/demise/dmesg/

Autocorrect in action!

> On 15 Dec 2014, at 00:35, Paul Chakravarti <paul.chakravarti at gmail.com> wrote:
> 
> Hello,
> 
> I was just trying out bhyve on a server (demise below) and got the following problems - 
> 
> 
>  # sh /usr/share/examples/bhyve/vmrun.sh -c 1 -m 512K -t tap0 -d vm0.img -i -I ./FreeBSD-10.1-RELEASE-amd64-bootonly.iso vm0
>  Launching virtual machine "vm0" ...
>  Consoles: userboot  
>  FreeBSD/amd64 User boot, Revision 1.1
>  (root at releng1.nyi.freebsd.org, Tue Nov 11 20:57:23 UTC 2014)
>  Loading /boot/defaults/loader.conf 
> 
>  /boot/kernel/kernel text=0xf8f898 data=0x124a30+0x2055c0 syms=[0x8+0x1405e0+0x8+0x15b077]
>  Booting...
>  mptable requires mapped mem
> 
> 
> After a bit of digging around I found the ‘-Y’ option for bhyve(8) (inhibit MPtable generation) and temporarily patched vmrun to pass this option and then got the following error
> 
>  /boot/kernel/kernel text=0xf8f898 data=0x124a30+0x2055c0 syms=[0x8+0x1405e0+0x8+0x15b077]
>  Booting...
>  smbios table requires mapped mem
>                                Assertion failed: (error == 0), function main, file /usr/src/usr.sbin/bhyve/bhyverun.c, line 839.
>  Abort trap (core dumped)
> 
> Any ideas?
> 
> Paul
> 
> 
> 
> 
> Copyright (c) 1992-2014 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 10.1-RELEASE #0 r274401: Tue Nov 11 21:02:49 UTC 2014
>    root at releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
> FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
> module vtnet already present!
> CPU: Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz (3400.09-MHz K8-class CPU)
>  Origin = "GenuineIntel"  Id = 0x306a9  Family = 0x6  Model = 0x3a  Stepping = 9
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
>  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
>  AMD Features2=0x1<LAHF>
>  Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
>  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
>  TSC: P-state invariant, performance statistics
> real memory  = 34359738368 (32768 MB)
> avail memory = 33200242688 (31662 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <ALASKA A M I>
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
> cpu0 (BSP): APIC ID:  0
> cpu1 (AP): APIC ID:  1
> cpu2 (AP): APIC ID:  2
> cpu3 (AP): APIC ID:  3
> cpu4 (AP): APIC ID:  4
> cpu5 (AP): APIC ID:  5
> cpu6 (AP): APIC ID:  6
> cpu7 (AP): APIC ID:  7
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> random: <Software, Yarrow> initialized
> kbd1 at kbdmux0
> acpi0: <ALASKA A M I> on motherboard
> acpi0: Power Button (fixed)
> acpi0: reservation of 67, 1 (4) failed
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> cpu4: <ACPI CPU> on acpi0
> cpu5: <ACPI CPU> on acpi0
> cpu6: <ACPI CPU> on acpi0
> cpu7: <ACPI CPU> on acpi0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 550
> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
> agp0: <IvyBridge server GT2 IG> on vgapci0
> agp0: aperture size is 256M, detected 65532k stolen memory
> vgapci0: Boot video device
> pcib2: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> pci0: <simple comms> at device 22.0 (no driver attached)
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7e04000-0xf7e043ff irq 16 at device 26.0 on pci0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
> pci4: <ACPI PCI bus> on pcib4
> em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xe000-0xe01f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 17 at device 0.0 on pci4
> em0: Using MSIX interrupts with 3 vectors
> em0: Ethernet address: 30:85:a9:a6:c6:93
> pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
> pci5: <ACPI PCI bus> on pcib5
> xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xf7c00000-0xf7c07fff irq 19 at device 0.0 on pci5
> xhci0: 32 byte context size.
> usbus1 on xhci0
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7e03000-0xf7e033ff irq 23 at device 29.0 on pci0
> usbus2: EHCI version 1.0
> usbus2 on ehci1
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci6: <ACPI PCI bus> on pcib6
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7e02000-0xf7e027ff irq 19 at device 31.2 on pci0
> ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahciem0: <AHCI enclosure management bridge> on ahci0
> acpi_button0: <Power Button> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ppc0: cannot reserve I/O port range
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> p4tcc4: <CPU Frequency Thermal Control> on cpu4
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> p4tcc5: <CPU Frequency Thermal Control> on cpu5
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> p4tcc6: <CPU Frequency Thermal Control> on cpu6
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> p4tcc7: <CPU Frequency Thermal Control> on cpu7
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> random: unblocking device.
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 5.0Gbps Super Speed USB v3.0
> usbus2: 480Mbps High Speed USB v2.0
> ugen2.1: <Intel> at usbus2
> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> ugen1.1: <0x1b21> at usbus1
> uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
> ugen0.1: <Intel> at usbus0
> uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> uhub1: 4 ports with 4 removable, self powered
> ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
> ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
> ses0: SEMB SES Device
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <ST33000650NS 0004> ATA-8 SATA 3.x device
> ada0: Serial Number Z295PC3C
> ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> ada1: <ST33000650NS 0004> ATA-8 SATA 3.x device
> ada1: Serial Number Z295PTNZ
> ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> ada1: Command Queueing enabled
> ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
> ada1: Previously was known as ad6
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #4 Launched!
> SMP: AP CPU #6 Launched!
> Timecounter "TSC-low" frequency 1700046150 Hz quality 1000
> Root mount waiting for: usbus2 usbus0
> uhub2: 2 ports with 2 removable, self powered
> uhub0: 2 ports with 2 removable, self powered
> Root mount waiting for: usbus2 usbus0
> ugen0.2: <vendor 0x8087> at usbus0
> uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
> ugen2.2: <vendor 0x8087> at usbus2
> uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
> Root mount waiting for: usbus2 usbus0
> uhub3: 6 ports with 6 removable, self powered
> uhub4: 8 ports with 8 removable, self powered
> Trying to mount root from zfs:tank/root []…
> 
>