-stable / bhyve / vmrc / centos65: no network card
Mathias Picker
Mathias.Picker at virtual-earth.de
Thu Aug 21 11:32:51 UTC 2014
Hi all,
I'm a total beginner with bhyve, so I thought I'd start with the vmrc
script.
I installed a centos65amd64iso image, and after some struggling with
grub everything works nicely - but I have no network card.
I tried to go through the documentation, and for me, everything looks
ok. Since I'm new in this, that is probably wrong ;)
So, here is the relevant config info:
twin# uname -a
FreeBSD twin 10.0-STABLE FreeBSD 10.0-STABLE #2 r270167: Tue Aug 19
15:46:15 CEST 2014 root at twin:/usr/obj/usr/src/sys/GENERIC amd64
twin# ifconfig
igb0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
0 mtu 1500
options=400b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO>
ether 0c:c4:7a:05:81:be
inet 1yy netmask 0xffffffc0 broadcast 1yy
inet6 fe80::ec4:7aff:fe05:81be%igb0 prefixlen 64 scopeid 0x1
inet 1xx netmask 0xfffffff8 broadcast 1
inet 1xx netmask 0xffffffff broadcast 1
inet 1xx netmask 0xffffffff broadcast 1
inet 1xx netmask 0xffffffff broadcast 1
inet 1xx netmask 0xffffffff broadcast 1
inet 1xx netmask 0xffffffff broadcast 1
inet 1xx netmask 0xffffffff broadcast 1
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 02:3d:80:23:57:00
nd6 options=1<PERFORMNUD>
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: tap8000 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 5 priority 128 path cost 2000000
member: igb0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 20000
tap0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80000<LINKSTATE>
ether 00:bd:15:8e:4a:00
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
tap8000: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 1500
options=80000<LINKSTATE>
ether 00:bd:76:11:59:40
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: active
Opened by PID 30817
bhyve is started like this:
/usr/sbin/bhyve -c 1 -m 2048 -A -H -W -s 0,hostbridge -s
2,ahci-hd,/usr/local/vmrc/vm//zimbra-centos-six.five0/zimbra-c
entos-six.five0.img -s 3:0,virtio-net,tap8000 -s 5,lpc -l com1,stdio
zimbra-centos-six.five0
So, from what I understand, the tap device is created, bridged, and put
correctly in the bhyve incantation.
So: why do I not have a network card in centos:
[root at localhost ~]# ifconfig
lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gül tigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenl��nge:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
[root at localhost ~]#
Any help, pointers, ideas very welcome!
Thanks, Mathias
P.S.:
centos dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.el6.x86_64 (mockbuild at c6b8.bsys.dev.centos.org)
(gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Fri Nov 22
03:15:09 UTC 2013
Command line: console=ttyS0
BOOT_IMAGE=(hd0,msdos1)/vmlinuz-2.6.32-431.el6.x86_64 ro
root=/dev/mapper/VolGroup-lv_root
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ffff (usable)
BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
DMI 2.4 present.
SMBIOS version 2.4 @ 0xF1000
DMI: BHYVE, BIOS 1.00 03/14/2014
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==>
(reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x80000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-0000000080000000
0000000000 - 0080000000 page 1G
kernel direct mapping tables up to 80000000 @ 8000-9000
RAMDISK: 031f8000 - 040779b0
ACPI: RSDP 00000000000f2400 00024 (v02 BHYVE )
ACPI: XSDT 00000000000f2480 00044 (v01 BHYVE BVXSDT 00000001 INTL
20130823)
ACPI: APIC 00000000000f2500 0005A (v01 BHYVE BVMADT 00000001 INTL
20130823)
ACPI: FACP 00000000000f2600 0010C (v05 BHYVE BVFACP 00000001 INTL
20130823)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version,
truncating length 0x10C to 0xF4 (20090903/tbfadt-288)
ACPI: DSDT 00000000000f2800 008DE (v02 BHYVE BVDSDT 00000001 INTL
20130823)
ACPI: FACS 00000000000f27c0 00040
ACPI: HPET 00000000000f2740 00038 (v01 BHYVE BVHPET 00000001 INTL
20130823)
ACPI: MCFG 00000000000f2780 0003C (v01 BHYVE BVMCFG 00000001 INTL
20130823)
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000080000000
Bootmem setup node 0 0000000000000000-0000000080000000
NODE_DATA [0000000000008000 - 000000000003bfff]
bootmap [000000000003c000 - 000000000004bfff] pages 10
(6 early reservations) ==> bootmem [0000000000 - 0080000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
0000008000]
#2 [0001000000 - 000201faa4] TEXT DATA BSS ==> [0001000000 -
000201faa4]
#3 [00031f8000 - 00040779b0] RAMDISK ==> [00031f8000 -
00040779b0]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 -
0000100000]
#5 [0002020000 - 000202007d] BRK ==> [0002020000 -
000202007d]
found SMP MP-table at [ffff8800000f0000] f0000
[ffffea0000000000-ffffea00009fffff] PMD ->
[ffff880002600000-ffff880002ffffff] on node 0
[ffffea0000a00000-ffffea0001bfffff] PMD ->
[ffff880004200000-ffff8800053fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA zone: 100 pages reserved
DMA zone: 3842 pages, LIFO batch:0
DMA32 zone: 7112 pages used for memmap
DMA32 zone: 513080 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
system APIC only can use physical flat
Setting APIC routing to physical flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x80868701 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880002200000 s94872 r8192 d23912
u2097152
pcpu-alloc: s94872 r8192 d23912 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0
Built 1 zonelists in Node order, mobility grouping on. Total pages:
516922
Policy zone: DMA32
Kernel command line: console=ttyS0
BOOT_IMAGE=(hd0,msdos1)/vmlinuz-2.6.32-431.el6.x86_64 ro
root=/dev/mapper/VolGroup-lv_root
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 2036104k/2097152k available (5325k kernel code, 392k absent,
60656k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:256
Console: colour dummy device 80x25
console [ttyS0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory
cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3499.273 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 6998.54 BogoMIPS (lpj=3499273)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
alternatives: switching to unfair spinlock
SMP alternatives: switching to UP code
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
APIC routing finalized to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-1650 v2 @ 3.50GHz stepping 04
Performance Events: unsupported p6 CPU model 62 no PMU driver, software
events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Brought up 1 CPUs
Total of 1 processors activated (6998.54 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs"
and report a bug
ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0x1fff]
pci_root PNP0A03:00: host bridge window [io 0x2000-0x203f]
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xc01fffff]
pci_root PNP0A03:00: host bridge window [mem 0xd000000000-0xd0000fffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0x1fff]
pci_bus 0000:00: root bus resource [io 0x2000-0x203f]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xc01fffff]
pci_bus 0000:00: root bus resource [mem 0xd000000000-0xd0000fffff]
pci 0000:00:00.0: ignoring class 600 (doesn't match header type 01)
pci 0000:00:02.0: reg 24: [mem 0xc0000000-0xc00003ff]
pci 0000:00:02.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:03.0: reg 10: [io 0x2000-0x201f]
pci 0000:00:03.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:05.0: reg 30: [mem 0x00000000-0x000007ff pref]
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:00:00.0: bridge window [io 0x0000-0x0000] (disabled)
pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] (disabled)
pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff pref]
(disabled)
ACPI: PCI Interrupt Routing Table [\_SB_.PC00._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but
clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
lo: Dropping TSO features since no CSUM feature.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
HPET: 8 timers in total, 1 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0, 0, 0, 0, 0
hpet0: 8 comparators, 32-bit 10.000000 MHz counter
hpet: hpet2 irq 24 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0060]
pnp 00:01: [io 0x0064]
pnp 00:01: [io 0x0220-0x0223]
pnp 00:01: [io 0x0224-0x0227]
pnp 00:01: [mem 0xe0000000-0xefffffff]
pnp 00:01: [io 0x04d0-0x04d1]
pnp 00:01: [io 0x0061]
pnp 00:01: [io 0x0400-0x0407]
pnp 00:01: [io 0x00b2]
pnp 00:01: [io 0x0084]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x03f8-0x03ff]
pnp 00:02: [irq 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [io 0x02f8-0x02ff]
pnp 00:03: [irq 3]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 6 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io 0x0220-0x0223] has been reserved
system 00:01: [io 0x0224-0x0227] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0400-0x0407] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:02.0: BAR 6: assigned [mem 0xc0000800-0xc0000fff pref]
pci 0000:00:03.0: BAR 6: assigned [mem 0xc0001000-0xc00017ff pref]
pci 0000:00:05.0: BAR 6: assigned [mem 0xc0001800-0xc0001fff pref]
pci 0000:00:00.0: not setting up bridge for bus 0000:01
pci 0000:00:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0x1fff]
pci_bus 0000:00: resource 6 [io 0x2000-0x203f]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:00: resource 8 [mem 0xd000000000-0xd0000fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:05.0: Activating ISA DMA hang workarounds
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14846k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1408874607.353:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 4005
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 8A44323FB303E068
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address
0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address
0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4,
slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ACPI Exception: AE_NOT_FOUND, No or invalid critical threshold
(20090903/thermal-386)
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
i8042: probe of i8042 failed with error -5
mice: PS/2 mouse device common for all mice
ACPI Error: Could not enable RealTimeClock event (20090903/evxfevnt-193)
ACPI Warning: Could not enable fixed event 4 (20090903/evxface-146)
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1588k freed
dracut: dracut-004-335.el6
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised:
dm-devel at redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
ahci 0000:00:02.0: version 3.0
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:02.0: irq 25 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:02.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA
mode
ahci 0000:00:02.0: flags: 64bit ncq sntf ilck stag pm led clo pio slum
part sxs apst
ahci 0000:00:02.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024 at 0xc0000000 port 0xc0000100 irq 25
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: BHYVE SATA DISK, 001, max UDMA/133
ata1.00: 207618048 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA BHYVE SATA DISK 001 PQ: 0
ANSI: 5
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sd 0:0:0:0: [sda] 207618048 512-byte logical blocks: (106 GB/99.0 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "VolGroup" using metadata type lvm2
dracut: 3 logical volume(s) in volume group "VolGroup" now active
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
dracut: Loading SELinux policy
type=1404 audit(1408874609.041:2): enforcing=1 old_enforcing=0
auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux: 81 classes, 277800 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses
genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition
SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses
genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1408874609.314:3): policy loaded auid=4294967295
ses=4294967295
dracut:
dracut: Switching root
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
udev: starting version 147
sd 0:0:0:0: Attached scsi generic sg0 type 0
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-1, type ext4), uses xattr
Adding 4128760k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1
extents:1 across:4128760k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
More information about the freebsd-virtualization
mailing list