Hyper-V 2012 Cluster / Failover - supported? - Any known issues?

[Karl Pielorz]

--On 18 September 2013 14:23 +0000 "Abhishek Gupta (LIS)" 
<abgupta at microsoft.com> wrote:

> Hi Karl,
>
> Thanks for reporting the issue. Please give us some time to investigate
> and get back to you on this. In the meantime I wanted to ask if setting
> up a Hyper-V replica for the FreeBSD VM and then a manual failover
> reproduces the same symptoms? Please let me know.

Hi,

Manual fail-over appears to work OK - in order, I tested:

 - Live migration from one node to the other, and back again (worked)

 - Stopping the cluster service on one of the nodes (i.e. from Failover 
Cluster Manager) - this showed the VM moving from the node that was 
stopped, over to the other node (again worked).

 - Pulling the power on the active node hosting both VM's (i.e. Windows 
guest, and FreeBSD guest) - this showed the remaining node trying to bring 
up the VM's (of which Windows came up OK, and FreeBSD got corrupted).


I've had to stop now as the guy here looking after the Synology kit on the 
test network is applying a firmware update (this is apparently for some 
appletalk issue or something).

I'll re-run the test after this has been done - if it still fails, I'll 
come back with a 'how to reproduce' type report (and I'll obviously let you 
know if we can't reproduce it again!).

At least I know it 'should' work now :)

Thanks,

-Karl