Use humanize_number() inside bhyveload?
Neel Natu
neelnatu at gmail.com
Wed Oct 9 04:00:44 UTC 2013
Hi Craig,
On Sun, Oct 6, 2013 at 11:31 PM, Craig Rodrigues <rodrigc at freebsd.org>wrote:
> On Fri, Oct 4, 2013 at 1:40 PM, Peter Grehan <grehan at freebsd.org> wrote:
>
> > Hi Craig,
> >
> >
> > Can we use expand_number() in bhyve_load?
> >>
> >
> > Please commit this change :)
> >
> > later,
> >
> > Peter.
> >
> >
> Here is a bigger patch, which uses expand_number() in bhyveload and bhyve,
> and also changes comments
> in vmrun.sh to reflect the change.
>
>
Thanks for the patch - submitted as r256176 with some modifications to
preserve backward compatibility.
best
Neel
> Index: share/examples/bhyve/vmrun.sh
> ===================================================================
> --- share/examples/bhyve/vmrun.sh (revision 256073)
> +++ share/examples/bhyve/vmrun.sh (working copy)
> @@ -31,7 +31,7 @@
> BHYVECTL=/usr/sbin/bhyvectl
> FBSDRUN=/usr/sbin/bhyve
>
> -DEFAULT_MEMSIZE=512
> +DEFAULT_MEMSIZE=512M
> DEFAULT_CPUS=2
> DEFAULT_TAPDEV=tap0
>
> @@ -47,7 +47,7 @@
> echo " -g: listen for connection from kgdb at <gdbport>"
> echo " -i: force boot of the Installation CDROM image"
> echo " -I: Installation CDROM image location (default is
> ${DEFAULT_ISOFILE})"
> - echo " -m: memory size in MB (default is ${DEFAULT_MEMSIZE}MB)"
> + echo " -m: memory size (default is ${DEFAULT_MEMSIZE})"
> echo " -t: tap device for virtio-net (default is $DEFAULT_TAPDEV)"
> echo ""
> echo " This script needs to be executed with superuser privileges"
> Index: usr.sbin/bhyve/Makefile
> ===================================================================
> --- usr.sbin/bhyve/Makefile (revision 256073)
> +++ usr.sbin/bhyve/Makefile (working copy)
> @@ -17,8 +17,8 @@
>
> NO_MAN=
>
> -DPADD= ${LIBVMMAPI} ${LIBMD} ${LIBPTHREAD}
> -LDADD= -lvmmapi -lmd -lpthread
> +DPADD= ${LIBVMMAPI} ${LIBMD} ${LIBUTIL} ${LIBPTHREAD}
> +LDADD= -lvmmapi -lmd -lutil -lpthread
>
> WARNS?= 2
>
> Index: usr.sbin/bhyve/bhyverun.c
> ===================================================================
> --- usr.sbin/bhyve/bhyverun.c (revision 256073)
> +++ usr.sbin/bhyve/bhyverun.c (working copy)
> @@ -37,7 +37,9 @@
>
> #include <stdio.h>
> #include <stdlib.h>
> +#include <err.h>
> #include <libgen.h>
> +#include <libutil.h>
> #include <unistd.h>
> #include <assert.h>
> #include <errno.h>
> @@ -541,6 +543,9 @@
> break;
> case 'm':
> memsize = strtoul(optarg, NULL, 0) * MB;
> + if (expand_number(optarg, &memsize) == -1)
> + errx(EXIT_FAILURE,
> + "invalid size argument `%s'", optarg);
> break;
> case 'H':
> guest_vmexit_on_hlt = 1;
> Index: usr.sbin/bhyveload/Makefile
> ===================================================================
> --- usr.sbin/bhyveload/Makefile (revision 256073)
> +++ usr.sbin/bhyveload/Makefile (working copy)
> @@ -4,8 +4,8 @@
> SRCS= bhyveload.c
> MAN= bhyveload.8
>
> -DPADD+= ${LIBVMMAPI}
> -LDADD+= -lvmmapi
> +DPADD+= ${LIBVMMAPI} ${LIBUTIL}
> +LDADD+= -lvmmapi -lutil
>
> WARNS?= 3
>
> Index: usr.sbin/bhyveload/bhyveload.8
> ===================================================================
> --- usr.sbin/bhyveload/bhyveload.8 (revision 256073)
> +++ usr.sbin/bhyveload/bhyveload.8 (working copy)
> @@ -1,4 +1,4 @@
> -.\"
> +\"
> .\" Copyright (c) 2012 NetApp Inc
> .\" All rights reserved.
> .\"
> @@ -60,13 +60,29 @@
> .Sh OPTIONS
> The following options are available:
> .Bl -tag -width indent
> -.It Fl m Ar mem-size
> +.It Fl m Ar mem-size Xo
> +.Sm off
> +.Op Cm K | k | M | m | G | g | T | t
> +.Xc
> +.Sm on
> .Ar mem-size
> -is the amount of memory allocated to the guest in units of megabytes.
> +is the amount of memory allocated to the guest.
> .Pp
> +The
> +.Ar mem-size
> +argument may be suffixed with one of
> +.Cm K ,
> +.Cm M ,
> +.Cm G
> +or
> +.Cm T
> +(either upper or lower case) to indicate a multiple of
> +Kilobytes, Megabytes, Gigabytes or Terabytes
> +respectively.
> +.Pp
> The default value of
> .Ar mem-size
> -is 256.
> +is 256M.
> .It Fl d Ar disk-path
> The
> .Ar disk-path
> @@ -83,7 +99,7 @@
> .Pa /freebsd/release.iso
> and has 1GB memory allocated to it:
> .Pp
> -.Dl "bhyveload -m 1024 -d /freebsd/release.iso freebsd-vm"
> +.Dl "bhyveload -m 1G -d /freebsd/release.iso freebsd-vm"
> .Sh SEE ALSO
> .Xr bhyve 4 ,
> .Xr bhyve 8 ,
> Index: usr.sbin/bhyveload/bhyveload.c
> ===================================================================
> --- usr.sbin/bhyveload/bhyveload.c (revision 256073)
> +++ usr.sbin/bhyveload/bhyveload.c (working copy)
> @@ -67,9 +67,11 @@
> #include <dirent.h>
> #include <dlfcn.h>
> #include <errno.h>
> +#include <err.h>
> #include <fcntl.h>
> #include <getopt.h>
> #include <limits.h>
> +#include <libutil.h>
> #include <stdio.h>
> #include <stdlib.h>
> #include <string.h>
> @@ -581,7 +583,9 @@
> break;
>
> case 'm':
> - mem_size = strtoul(optarg, NULL, 0) * MB;
> + if (expand_number(optarg, &mem_size) == -1)
> + errx(EXIT_FAILURE,
> + "invalid size argument `%s'", optarg);
> break;
>
> case '?':
> _______________________________________________
> freebsd-virtualization at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
> To unsubscribe, send any mail to "
> freebsd-virtualization-unsubscribe at freebsd.org"
>
More information about the freebsd-virtualization
mailing list