bhyve: calcru runtime msgs still ocurring ...
Dan Mack
mack at macktronics.com
Sat Jun 1 21:45:11 UTC 2013
Just FYI/FWIW I am still seeing semi-regular messages like this on my
bhyve console on releases as late as head-251224:
calcru: runtime went backwards from 992 usec to 982 usec for pid 794 (sshd)
calcru: runtime went backwards from 702 usec to 695 usec for pid 800 (sendmail)
I am not seeing stability issues due to this but they are concerning.
Here's a dmesg from the host and from a guest both at 251224:
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #33 r251224: Sat Jun 1 09:48:40 CDT 2013
root at olive.macktronics.com:/usr/obj/usr/src/sys/MACKGEN amd64
FreeBSD clang version 3.3 (trunk 178860) 20130405
CPU: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (3200.18-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206d7 Family = 0x6 Model = 0x2d Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,C
LFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbee3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,D
CA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 68719476736 (65536 MB)
avail memory = 63216635904 (60288 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL DX79SI >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
cpu8 (AP): APIC ID: 8
cpu9 (AP): APIC ID: 9
cpu10 (AP): APIC ID: 10
cpu11 (AP): APIC ID: 11
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <INTEL DX79SI> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of f0000000, 18000000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed03fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xe3400000-0xe3401fff irq 16 at device 0.0 on pci2
usbus0: waiting for BIOS to give up control
xhci0: 32 byte context size.
usbus0 on xhci0
pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 on pci3
pci3: <multimedia, HDA> at device 0.1 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pci0: <base peripheral> at device 5.0 (no driver attached)
pci0: <base peripheral> at device 5.2 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x4040-0x405f mem 0xe3500000-0xe351ffff,0xe3521000-0xe3521fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 4c:72:b9:d1:b2:d2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe3601000-0xe36013ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci7: <ACPI PCI bus> on pcib7
pci7: <serial bus, FireWire> at device 0.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci8: <ACPI PCI bus> on pcib8
xhci1: <NEC uPD720200 USB 3.0 controller> mem 0xe3200000-0xe3201fff irq 19 at device 0.0 on pci8
usbus2: waiting for BIOS to give up control
xhci1: 32 byte context size.
usbus2 on xhci1
pcib9: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pci9: <ACPI PCI bus> on pcib9
em1: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x1000-0x101f mem 0xe3100000-0xe311ffff,0xe3120000-0xe3123fff irq 17 at device 0.0 on pci9
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: 4c:72:b9:d1:b2:d3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe3602000-0xe36023ff irq 23 at device 29.0 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
pcib10: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib10
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0x4068-0x406f,0x4074-0x4077,0x4060-0x4067,0x4070-0x4073,0x4020-0x403f mem 0xe3523000-0xe35237ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
orm0: <ISA Option ROMs> at iomem 0xd1000-0xd1fff,0xd2000-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
est8: <Enhanced SpeedStep Frequency Control> on cpu8
p4tcc8: <CPU Frequency Thermal Control> on cpu8
est9: <Enhanced SpeedStep Frequency Control> on cpu9
p4tcc9: <CPU Frequency Thermal Control> on cpu9
est10: <Enhanced SpeedStep Frequency Control> on cpu10
p4tcc10: <CPU Frequency Thermal Control> on cpu10
est11: <Enhanced SpeedStep Frequency Control> on cpu11
p4tcc11: <CPU Frequency Thermal Control> on cpu11
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 5.0Gbps Super Speed USB v3.0
usbus3: 480Mbps High Speed USB v2.0
ugen1.1: <Intel> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x1033> at usbus0
uhub1: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen3.1: <Intel> at usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <0x1033> at usbus2
uhub3: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <OCZ-VERTEX4 1.5> ATA-9 SATA 3.x device
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <INTEL SSDSC2CW120A3 400i> ATA-9 SATA 3.x device
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <Hitachi HUS724020ALE640 MJ6OA3B0> ATA-8 SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <Hitachi HUS724020ALE640 MJ6OA3B0> ATA-8 SATA 3.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
ada4 at ahcich4 bus 0 scbus4 target 0 lun 0
ada4: <Hitachi HUS724020ALE640 MJ6OA3B0> ATA-8 SATA 3.x device
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad12
ada5 at ahcich5 bus 0 scbus5 target 0 lun 0
ada5: <Hitachi HUS724020ALE640 MJ6OA3B0> ATA-8 SATA 3.x device
ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada5: Previously was known as ad14
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic9: Forcing LINT1 to edge trigger
SMP: AP CPU #9 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic8: Forcing LINT1 to edge trigger
SMP: AP CPU #8 Launched!
lapic10: Forcing LINT1 to edge trigger
SMP: AP CPU #10 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic11: Forcing LINT1 to edge trigger
SMP: AP CPU #11 Launched!
uhub1: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus3 usbus1
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus1
ugen3.2: <vendor 0x8087> at usbus3
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus3
ugen1.2: <vendor 0x8087> at usbus1
uhub5: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus3 usbus1
uhub5: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen1.3: <vendor 0x060b> at usbus1
ukbd0: <vendor 0x060b USB Keyboard, class 0/0, rev 2.00/1.10, addr 3> on usbus1
kbd2 at ukbd0
ugen3.3: <Ralink> at usbus3
Root mount waiting for: usbus3
ugen3.4: <vendor 0x0db0> at usbus3
Trying to mount root from zfs:tron []...
ums0: <vendor 0x060b USB Keyboard, class 0/0, rev 2.00/1.10, addr 3> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=0
run0: <1.0> on usbus3
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address 94:db:c9:e3:6e:c8
ubt0: <vendor 0x0db0 product 0xa871, class 224/1, rev 2.00/52.76, addr 4> on usbus3
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
tap0: Ethernet address: 00:bd:c6:d3:3a:00
tap1: Ethernet address: 00:bd:c7:d3:3a:01
bridge0: Ethernet address: 02:4c:89:ce:33:00
tap0: promiscuous mode enabled
bridge0: link state changed to DOWN
em0: promiscuous mode enabled
em0: link state changed to DOWN
bridge1: Ethernet address: 02:4c:89:ce:33:01
tap1: promiscuous mode enabled
bridge1: link state changed to DOWN
em1: link state changed to DOWN
em1: promiscuous mode enabled
em1: link state changed to UP
bridge1: link state changed to UP
em0: link state changed to UP
==== dmesg from the guest
root at drag:~ # dmesg | less
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #33 r251224: Sat Jun 1 09:48:40 CDT 2013
root at olive.macktronics.com:/usr/obj/usr/src/sys/MACKGEN amd64
FreeBSD clang version 3.3 (trunk 178860) 20130405
CPU: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz (3199.84-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206d7 Family = 0x6 Model = 0x2d Stepping = 7
Features=0x8fa3ab7f<FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,APIC,SEP,PGE,CMOV,PAT,PSE36,DTS,MMX,FXSR,SSE,SSE2,SS,PBE>
Features2=0x83bee217<SSE3,PCLMULQDQ,DTES64,DS_CPL,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,HV>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
real memory = 2147483648 (2048 MB)
avail memory = 1985380352 (1893 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BHYVE BVMADT >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-16 on motherboard
module_register_init: MOD_LOAD (vesa, 0xffffffff807bb380, 0) error 19
kbd0 at kbdmux0
acpi0: <BHYVE BVXSDT> on motherboard
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: no PRT entry for 0.31.INTA
virtio_pci0: <VirtIO PCI Network adapter> port 0x2000-0x201f mem 0xc0000000-0xc0001fff at device 1.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x1018020 <NotifyOnEmpty,Status,MrgRxBuf,MacAddress>
virtio_pci0: negotiated features: 0x1018020 <NotifyOnEmpty,Status,MrgRxBuf,MacAddress>
vtnet0: Ethernet address: 00:a0:98:58:64:98
virtio_pci1: <VirtIO PCI Network adapter> port 0x2020-0x203f mem 0xc0002000-0xc0003fff at device 2.0 on pci0
vtnet1: <VirtIO Networking Adapter> on virtio_pci1
virtio_pci1: host features: 0x1018020 <NotifyOnEmpty,Status,MrgRxBuf,MacAddress>
virtio_pci1: negotiated features: 0x1018020 <NotifyOnEmpty,Status,MrgRxBuf,MacAddress>
vtnet1: Ethernet address: 00:a0:98:ec:d7:5d
virtio_pci2: <VirtIO PCI Block adapter> port 0x2040-0x207f mem 0xc0004000-0xc0005fff at device 3.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci2
virtio_pci2: host features: 0x10000004 <RingIndirect,MaxNumSegs>
virtio_pci2: negotiated features: 0x10000004 <RingIndirect,MaxNumSegs>
vtblk0: 24576MB (50331648 512 byte sectors)
uart2: <16550 or compatible> port 0x3f8-0x3ff irq 4 at device 31.0 on pci0
uart2: console (9600,n,8,1)
ctl: CAM Target Layer loaded
Timecounters tick every 10.000 msec
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/vtbd0p2 [rw]...
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
g_handleattr: vtbd0 bio_length 24 len 28 -> EFAULT
calcru: runtime went backwards from 992 usec to 982 usec for pid 794 (sshd)
calcru: runtime went backwards from 702 usec to 695 usec for pid 800 (sendmail)
Thanks, hope this might help,
Dan
More information about the freebsd-virtualization
mailing list