kismet

[Vijay Kiran]

> 
> Firmware is also installed:
> # pkg_info | grep iwi
> iwi-firmware-2.3_1  Intel PRO/Wireless 2100 Driver Firmware
Load the firmware using 
iwicontrol iwi0 -d /usr/local/share/iwi-firmware -m bss


> > Finally use /etc/rc.d/netif start. 
> 
manually start the netif


/etc/rc.d/netif start

then you should see something like this:

DHCPDISCOVER on iwi0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on iwi0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on iwi0 to 255.255.255.255 port 67 interval 9
DHCPOFFER from 192.168.1.1
DHCPREQUEST on iwi0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.2.188 -- renewal in 300 seconds.
iwi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::212:f0ff:fe0e:dabf%iwi0 prefixlen 64 scopeid 0x3
        inet 192.168.2.188 netmask 0xfffffc00 broadcast 192.168.3.255
        ether 00:12:f0:0e:da:bf
        media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps)
        status: associated





Regards,
www.VijayKiran.com