slow USB 3.0 on -current
John-Mark Gurney
jmg at funkthat.com
Sat Jul 11 22:44:36 UTC 2020
Hello,
I'm having issues getting good ethernet performance from a USB ethernet
adapter (ure) under FreeBSD on an HP EliteDesk 705 G2 Mini[1]. It's an
AMD PRO A10-8700B based system using the AMD A78 FCH chipset.
Under FreeBSD -current (r362596), 12.1-R and 11.4-R, the RealTek USB
adapter only gets around 10MB/sec performance. During the transfer,
the CPU usage is only around 3-5%, so it's definitely not CPU bound.
I have tested Windows 10 and NetBSD 9.0 performance, and both provide
100MB/sec+ w/o troubles.
I have attached dmesg from both FreeBSD -current and NetBSD 9.0.
Any hints on how to fix this?
This may be related, but I'm also having issues w/ booting when I have
both a SD USB 2.0 card reader AND the ure plugged into USB 3.0 ports.
If I move the SD card reader to USB 2.0, the umass device will attach
and work. I have also attached a clip of the dmesg from that
happening.
Has anyone else seen this issue? Ideas or thoughts on how to resolve
the performance issues?
Thanks.
[1] https://support.hp.com/us-en/document/c04834953
--
John-Mark Gurney Voice: +1 415 225 5579
"All that I will do, has been done, All that I have, has not."
-------------- next part --------------
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r362596: Thu Jun 25 05:02:51 UTC 2020
root at releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 10.0.1 (git at github.com:llvm/llvm-project.git llvmorg-10.0.0-97-g6f71678ecd2)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1024x768
CPU: AMD PRO A10-8700B R6, 10 Compute Cores 4C+6G (1796.67-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x660f01 Family=0x15 Model=0x60 Stepping=1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x2febbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC,<b25>,DBE,PTSC,MWAITX>
Structured Extended Features=0x1a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2>
XSAVE Features=0x1<XSAVEOPT>
AMD Extended Feature Extensions ID EBX=0x1000<IBPB>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8034414592 (7662 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HPQOEM 805B >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ioapic0: MADT APIC ID 4 != hw id 0
ioapic1: MADT APIC ID 5 != hw id 0
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 2 3 1
Timecounter "TSC" frequency 1796666782 Hz quality 1000
random: entropy device external interface
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 13.0.
kbd1 at kbdmux0
000.000044 [4342] netmap_init netmap: loaded module
[ath_hal] loaded
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
acpi0: <HPQOEM SLIC-BPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x8> port 0x62,0x66 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xc0000000-0xc7ffffff,0xc8000000-0xc87fffff,0xc8b00000-0xc8b3ffff irq 43 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9840) HDA Controller> mem 0xc8b60000-0xc8b63fff at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pci1: <ACPI PCI bus> on pcib1
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x5762100> mem 0xc8820000-0xc882ffff,0xc8810000-0xc881ffff,0xc8800000-0xc880ffff at device 0.0 on pci1
bge0: CHIP ID 0x05762100; ASIC REV 0x5762; CHIP REV 0x57621; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5725C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: fc:3f:db:07:1c:f2
pci0: <encrypt/decrypt> at device 8.0 (no driver attached)
hdac1: <AMD Stoney HDA Controller> mem 0xc8b64000-0xc8b67fff at device 9.2 on pci0
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xc8b68000-0xc8b69fff at device 16.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AMD KERNCZ AHCI SATA controller> port 0x2118-0x211f,0x2124-0x2127,0x2110-0x2117,0x2120-0x2123,0x2100-0x210f mem 0xc8b6c000-0xc8b6c3ff at device 17.0 on pci0
ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich0: <AHCI channel> at channel 0 on ahci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc8b6d000-0xc8b6d0ff at device 18.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
Obsolete code will be removed soon: random(9) is the obsolete Park-Miller LCG from 1988
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
hdacc1: <Realtek ALC221 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC221 Audio Function Group> at nid 1 on hdacc1
pcm3: <Realtek ALC221 (Analog)> at nid 23 and 26 on hdaa1
pcm4: <Realtek ALC221 (Front Analog Headphones)> at nid 33 on hdaa1
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Root mount waiting for: usbus0 CAM usbus1
WARNING: WITNESS option enabled, expect reduced performance.
ugen1.1: <AMD EHCI root HUB> at usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0 on usbus1
uhub1 on usbus0
uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <M4-CT064M4SSD1 070H> ACS-2 ATA SATA 3.x device
ada0: Serial Number 000000001308092C5DEE
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 61056MB (125043311 512 byte sectors)
uhub1: 8 ports with 8 removable, self powered
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen1.2: <vendor 0x0438 product 0x7900> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
Root mount waiting for: usbus0 usbus1
ugen0.2: <Generic Mass Storage Device> at usbus0
umass0 on uhub1
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 1> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:1:0: Attached to scbus1
uhub2: 4 ports with 4 removable, self powered
ugen1.3: <SIGMACHIP USB Keyboard> at usbus1
ukbd0 on uhub2
ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.50, addr 3> on usbus1
kbd2 at ukbd0
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ugen0.2: <Generic Mass Storage Device> at usbus0 (disconnected)
umass0: at uhub1, port 7, addr 1 (disconnected)
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
umass0: detached
ugen1.4: <Generic Mass Storage Device> at usbus1
umass0 on uhub2
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:1:0: Attached to scbus1
uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held:
exclusive sleep mutex CAM device lock (CAM device lock) r = 0 (0xfffff80006032cd0) locked @ /usr/src/sys/cam/scsi/scsi_pass.c:674
stack backtrace:
#0 0xffffffff80c32891 at witness_debugger+0x71
#1 0xffffffff80c3382d at witness_warn+0x40d
#2 0xffffffff80efe586 at uma_zalloc_arg+0x46
#3 0xffffffff80b740ea at getenv_string_buffer+0x3a
#4 0xffffffff80b74817 at getenv_quad+0x17
#5 0xffffffff80b747e2 at getenv_int+0x12
#6 0xffffffff803a7f1a at daregister+0x1ea
#7 0xffffffff8037445b at cam_periph_alloc+0x57b
#8 0xffffffff803a7872 at daasync+0x2c2
#9 0xffffffff80381aa2 at xpt_async_process_dev+0x152
#10 0xffffffff8037d682 at xpt_async_process+0x312
#11 0xffffffff8037ddf2 at xpt_done_process+0x382
#12 0xffffffff8037fdb5 at xpt_done_td+0xf5
#13 0xffffffff80b830f0 at fork_exit+0x80
#14 0xffffffff8104150e at fork_trampoline+0xe
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <Mass Storage Device 1.00> Removable Direct Access SCSI device
da0: Serial Number 121220130416
da0: 40.000MB/s transfers
da0: 15240MB (31211520 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
random: unblocking device.
ugen0.2: <Generic 4-Port USB 2.0 Hub> at usbus0
uhub3 on uhub1
uhub3: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.33, addr 1> on usbus0
uhub3: MTT enabled
uhub3: 4 ports with 3 removable, self powered
ugen0.3: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub4 on uhub1
uhub4: <Interrupt In Interface> on usbus0
uhub4: 4 ports with 3 removable, self powered
ugen0.4: <Realtek USB 10/100/1000 LAN> at usbus0
ure0 on uhub4
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 3> on usbus0
miibus1: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus1
rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: d0:37:45:77:56:3d
-------------- next part --------------
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved.
[ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.000000] The Regents of the University of California. All rights reserved.
[ 1.000000] NetBSD 9.0 (GENERIC) #0: Fri Feb 14 00:06:28 UTC 2020
[ 1.000000] mkrepro at mkrepro.NetBSD.org:/usr/src/sys/arch/amd64/compile/GENERIC
[ 1.000000] total memory = 7978 MB
[ 1.000000] avail memory = 7720 MB
[ 1.000000] cpu_rng: RDRAND
[ 1.000000] timecounter: Timecounters tick every 10.000 msec
[ 1.000000] Kernelized RAIDframe activated
[ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done
[ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
[ 1.000003] efi: systbl at pa b41cef18
[ 1.000003] HP HP EliteDesk 705 G2 MINI ( )
[ 1.000003] mainbus0 (root)
[ 1.000003] ACPI: RSDP 0x00000000B4FFE014 000024 (v02 HPQOEM)
[ 1.000003] ACPI: XSDT 0x00000000B4FFE120 0000AC (v01 HPQOEM SLIC-BPC 00000001 01000013)
[ 1.000003] ACPI: FACP 0x00000000B4FFA000 00010C (v05 HPQOEM SLIC-BPC 00000001 HP 00000001)
[ 1.000003] ACPI: DSDT 0x00000000B4FE5000 00D3F9 (v02 HPQOEM 805B 00000000 INTL 20121018)
[ 1.000003] ACPI: FACS 0x00000000B4F85000 000040
[ 1.000003] ACPI: UEFI 0x00000000B4FFD000 000042 (v01 00000000 00000000)
[ 1.000003] ACPI: TCPA 0x00000000B4FFC000 000032 (v02 HPQOEM EDK2 00000002 01000013)
[ 1.000003] ACPI: SSDT 0x00000000B4FFB000 0003B8 (v02 HPQOEM TcgTable 00001000 INTL 20121018)
[ 1.000003] ACPI: ASF! 0x00000000B4FF9000 00006E (v32 HPQOEM 805B 00000001 HP 00000001)
[ 1.000003] ACPI: MSDM 0x00000000B4FF8000 000055 (v03 HPQOEM SLIC-BPC 00000000 HP 00000001)
[ 1.000003] ACPI: SLIC 0x00000000B4FF7000 000176 (v01 HPQOEM SLIC-BPC 00000001 HP 00000001)
[ 1.000003] ACPI: WSMT 0x00000000B4FF6000 000028 (v01 HPQOEM 805B 00000001 HP 00000001)
[ 1.000003] ACPI: HPET 0x00000000B4FF5000 000038 (v01 HPQOEM 805B 00000001 HP 00000001)
[ 1.000003] ACPI: APIC 0x00000000B4FF4000 000090 (v02 HPQOEM 805B 00000001 HP 00000001)
[ 1.000003] ACPI: MCFG 0x00000000B4FF3000 00003C (v01 HPQOEM 805B 00000001 HP 00000001)
[ 1.000003] ACPI: SSDT 0x00000000B4FE4000 000854 (v01 AMD AGESA 00000001 AMD 00000001)
[ 1.000003] ACPI: SSDT 0x00000000B4FDB000 00873A (v02 AMD AGESA 00000002 MSFT 04000000)
[ 1.000003] ACPI: IVRS 0x00000000B4FDA000 0000D0 (v02 AMD AGESA 00000001 AMD 00000000)
[ 1.000003] ACPI: SSDT 0x00000000B4FD8000 0015F0 (v01 AMD CPMCMN 00000001 INTL 20121018)
[ 1.000003] ACPI: FPDT 0x00000000B4FD7000 000044 (v01 HPQOEM EDK2 00000002 01000013)
[ 1.000003] ACPI: BGRT 0x00000000B4FD6000 000038 (v01 HPQOEM EDK2 00000002 01000013)
[ 1.000003] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 1.000003] ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 0x21, 24 pins
[ 1.000003] ioapic1 at mainbus0 apid 5: pa 0xfec01000, version 0x21, 32 pins
[ 1.000003] cpu0 at mainbus0 apid 16
[ 1.000003] cpu0: AMD PRO A10-8700B R6, 10 Compute Cores 4C+6G , id 0x660f01
[ 1.000003] cpu0: package 0, core 0, smt 0
[ 1.000003] cpu1 at mainbus0 apid 17
[ 1.000003] cpu1: AMD PRO A10-8700B R6, 10 Compute Cores 4C+6G , id 0x660f01
[ 1.000003] cpu1: package 0, core 1, smt 0
[ 1.000003] cpu2 at mainbus0 apid 18
[ 1.000003] cpu2: AMD PRO A10-8700B R6, 10 Compute Cores 4C+6G , id 0x660f01
[ 1.000003] cpu2: package 0, core 2, smt 0
[ 1.000003] cpu3 at mainbus0 apid 19
[ 1.000003] cpu3: AMD PRO A10-8700B R6, 10 Compute Cores 4C+6G , id 0x660f01
[ 1.000003] cpu3: package 0, core 3, smt 0
[ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405
[ 1.000003] acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,00000001>, AslId < ,01000013>
[ 1.000003] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000
[ 1.000003] acpi0: SCI interrupting at int 9
[ 1.000003] acpi0: fixed power button present
[ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
[ 1.009574] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
[ 1.009574] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
[ 1.015682] acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
[ 1.015682] acpiwmi0 at acpi0 (WMIB, PNP0C14-1): ACPI WMI Interface
[ 1.015682] acpiwmibus at acpiwmi0 not configured
[ 1.015682] acpiwmi1 at acpi0 (WMIV, PNP0C14-2): ACPI WMI Interface
[ 1.015682] wmihp0 at acpiwmi1: HP WMI mappings
[ 1.015682] acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
[ 1.015682] acpivga0 at acpi0 (VGA): ACPI Display Adapter
[ 1.015682] acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
[ 1.015682] acpiout0: brightness levels: [2,8,14,22,28,34,42,48,54,62,68,75,82,88,100]
[ 1.015682] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
[ 1.015682] spkr0 at pcppi1: PC Speaker
[ 1.015682] wsbell at spkr0 not configured
[ 1.015682] midi0 at pcppi1: PC speaker
[ 1.015682] sysbeep0 at pcppi1
[ 1.015682] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
[ 1.015682] SYSR (PNP0C02) at acpi0 not configured
[ 1.015682] MEM (PNP0C01) at acpi0 not configured
[ 1.015682] COM1 (PNP0501) at acpi0 not configured
[ 1.015682] MEMR (PNP0C02) at acpi0 not configured
[ 1.015682] acpiwmi2 at acpi0 (WMIS, PNP0C14-3): ACPI WMI Interface
[ 1.015682] acpiwmibus at acpiwmi2 not configured
[ 1.015682] TPM (IFX0102) at acpi0 not configured
[ 1.015682] AWR0 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR0 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR1 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR2 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR3 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR4 (PNP0C02) at acpi0 not configured
[ 1.015682] AWR1 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR5 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR6 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR7 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR8 (PNP0C02) at acpi0 not configured
[ 1.015682] ABR9 (PNP0C02) at acpi0 not configured
[ 1.015682] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 1.015682] attimer1: attached to pcppi1
[ 1.015682] pci0 at mainbus0 bus 0: configuration mode 1
[ 1.015682] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
[ 1.015682] pchb0 at pci0 dev 0 function 0: vendor 1022 product 1576 (rev. 0x00)
[ 1.015682] vendor 1022 product 1577 (IOMMU system) at pci0 dev 0 function 2 not configured
[ 1.015682] genfb0 at pci0 dev 1 function 0: vendor 1002 product 9874 (rev. 0xc5)
[ 1.015682] genfb0: framebuffer at 0xc0000000, size 1024x768, depth 32, stride 4096
[ 1.015682] genfb0: shadow framebuffer enabled, size 3072 KB
[ 1.015682] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[ 1.015682] wsmux1: connecting to wsdisplay0
[ 1.015682] drm at genfb0 not configured
[ 1.015682] hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
[ 1.015682] hdaudio0: interrupting at msi0 vec 0
[ 1.015682] hdafg0 at hdaudio0: vendor 1002 product aa01
[ 1.015682] hdafg0: HDMI00 2ch: Digital Out [Jack]
[ 1.015682] hdafg0: HDMI01 2ch: Digital Out [Jack]
[ 1.015682] hdafg0: HDMI02 2ch: Digital Out [Jack]
[ 1.015682] hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
[ 1.015682] pchb1 at pci0 dev 2 function 0: vendor 1022 product 157b (rev. 0x00)
[ 1.015682] ppb0 at pci0 dev 2 function 3: vendor 1022 product 157c (rev. 0x00)
[ 1.015682] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x2 @ 2.5GT/s
[ 1.015682] ppb0: link is x1 @ 2.5GT/s
[ 1.015682] pci1 at ppb0 bus 1
[ 1.015682] pci1: i/o space, memory space enabled
[ 1.015682] bge0 at pci1 dev 0 function 0: Broadcom BCM5762 Gigabit Ethernet
[ 1.015682] bge0: interrupting at msix1 vec 0
[ 1.015682] bge0: HW config 00280150, 0001c010, 0000a838, 00000000 00000000
[ 1.015682] bge0: ASIC BCM5762 B0 (0x5762100), Ethernet address fc:3f:db:07:1c:f2
[ 1.015682] bge0: setting short Tx thresholds
[ 1.015682] brgphy0 at bge0 phy 1: BCM5725C 1000BASE-T media interface, rev. 0
[ 1.015682] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
[ 1.015682] pchb2 at pci0 dev 3 function 0: vendor 1022 product 157b (rev. 0x00)
[ 1.015682] vendor 1022 product 1578 (miscellaneous crypto) at pci0 dev 8 function 0 not configured
[ 1.015682] pchb3 at pci0 dev 9 function 0: vendor 1022 product 157d (rev. 0x00)
[ 1.015682] hdaudio1 at pci0 dev 9 function 2: HD Audio Controller
[ 1.015682] hdaudio1: interrupting at ioapic1 pin 15
[ 1.015682] hdafg1 at hdaudio1: vendor 10ec product 0221
[ 1.015682] hdafg1: DAC00 2ch: Speaker [Built-In]
[ 1.015682] hdafg1: DAC01 2ch: HP Out [Jack]
[ 1.015682] hdafg1: ADC02 2ch: Mic In [Jack]
[ 1.015682] hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
[ 1.015682] audio0 at hdafg1: playback, capture, full duplex, independent
[ 1.015682] audio0: slinear_le:16 2ch 48000Hz, blk 4ms for playback
[ 1.015682] audio0: slinear_le:16 2ch 48000Hz, blk 4ms for recording
[ 1.015682] spkr1 at audio0: PC Speaker (synthesized)
[ 1.015682] wsbell at spkr1 not configured
[ 1.015682] xhci0 at pci0 dev 16 function 0: vendor 1022 product 7914 (rev. 0x20)
[ 1.015682] xhci0: interrupting at msix2 vec 0
[ 1.015682] xhci0: xHCI version 1.0
[ 1.015682] usb0 at xhci0: USB revision 3.0
[ 1.015682] usb1 at xhci0: USB revision 2.0
[ 1.015682] ahcisata0 at pci0 dev 17 function 0: vendor 1022 product 7901 (rev. 0x49)
[ 1.015682] ahcisata0: 64-bit DMA
[ 1.015682] ahcisata0: AHCI revision 1.30, 1 port, 32 slots, CAP 0xf733ff00<PSC,SSC,PMD,FBSS,SPM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
[ 1.015682] ahcisata0: interrupting at ioapic0 pin 19
[ 1.015682] atabus0 at ahcisata0 channel 0
[ 1.015682] ehci0 at pci0 dev 18 function 0: vendor 1022 product 7908 (rev. 0x49)
[ 1.015682] ehci0: interrupting at ioapic0 pin 18
[ 1.015682] ehci0: EHCI version 1.0
[ 1.015682] usb2 at ehci0: USB revision 2.0
[ 1.015682] piixpm0 at pci0 dev 20 function 0: vendor 1022 product 790b (rev. 0x4a)
[ 1.015682] piixpm0: polling
[ 1.015682] iic0 at piixpm0 port 0: I2C bus
[ 1.015682] iic1 at piixpm0 port 1: I2C bus
[ 1.015682] iic2 at piixpm0 port 2: I2C bus
[ 1.015682] iic3 at piixpm0 port 3: I2C bus
[ 1.015682] pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x11)
[ 1.015682] pchb4 at pci0 dev 24 function 0: vendor 1022 product 1570 (rev. 0x00)
[ 1.015682] pchb5 at pci0 dev 24 function 1: vendor 1022 product 1571 (rev. 0x00)
[ 1.015682] pchb6 at pci0 dev 24 function 2: vendor 1022 product 1572 (rev. 0x00)
[ 1.015682] pchb7 at pci0 dev 24 function 3: vendor 1022 product 1573 (rev. 0x00)
[ 1.015682] pchb8 at pci0 dev 24 function 4: vendor 1022 product 1574 (rev. 0x00)
[ 1.015682] pchb9 at pci0 dev 24 function 5: vendor 1022 product 1575 (rev. 0x00)
[ 1.015682] isa0 at pcib0
[ 1.015682] tpm0 at isa0 iomem 0xfed40000-0xfed44fff irq 7tpm0: device 0x001b15d1 rev 0x10
[ 1.015682] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
[ 1.015682] pckbc0 at isa0 port 0x60-0x64
[ 1.015682] acpicpu0 at cpu0: ACPI CPU
[ 1.015682] acpicpu0: C1: HLT, lat 0 us, pow 0 mW
[ 1.015682] acpicpu0: C2: I/O, lat 400 us, pow 0 mW
[ 1.015682] acpicpu0: P0: FFH, lat 4 us, pow 4485 mW, 1800 MHz
[ 1.015682] acpicpu0: P1: FFH, lat 4 us, pow 3656 mW, 1600 MHz
[ 1.015682] acpicpu0: P2: FFH, lat 4 us, pow 2625 mW, 1300 MHz
[ 1.015682] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
[ 1.015682] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
[ 1.015682] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
[ 1.015682] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
[ 1.015682] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
[ 1.015682] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
[ 1.015682] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
[ 1.015682] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
[ 1.015682] acpicpu1 at cpu1: ACPI CPU
[ 1.015682] acpicpu2 at cpu2: ACPI CPU
[ 1.015682] acpicpu3 at cpu3: ACPI CPU
[ 1.015682] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
[ 1.841451] autoconfiguration error: ERROR: 527 cycle TSC drift observed
[ 1.841451] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.841451] uhub0: 4 ports with 4 removable, self powered
[ 1.841451] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.841451] uhub1: 4 ports with 4 removable, self powered
[ 1.841451] IPsec: Initialized Security Association Processing.
[ 1.861459] uhub2 at usb2: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.861459] uhub2: 2 ports with 2 removable, self powered
[ 3.481992] uhub3 at uhub0 port 3: Generic (0xbda) 4-Port USB 3.0 Hub (0x411), class 9/0, rev 3.00/1.33, addr 1
[ 3.481992] uhub4 at uhub1 port 3: Generic (0xbda) 4-Port USB 2.0 Hub (0x5411), class 9/0, rev 2.10/1.33, addr 2
[ 3.481992] uhub4: multiple transaction translators
[ 3.502058] uhub4: 4 ports with 3 removable, self powered
[ 3.502058] uhub3: 4 ports with 3 removable, self powered
[ 4.102198] uhub5 at uhub2 port 1: vendor 0438 (0x438) product 7900 (0x7900), class 9/0, rev 2.00/0.18, addr 2
[ 4.102198] uhub5: single transaction translator
[ 4.102198] uhub5: 4 ports with 4 removable, self powered
[ 4.392287] ure0 at uhub3 port 4
[ 4.392287] ure0: Realtek (0xbda) USB 10/100/1000 LAN (0x8153), rev 3.00/30.00, addr 3
[ 4.392287] ure0: RTL8153 ver 5c20
[ 4.502331] rgephy0 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0
[ 4.502331] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
[ 4.522332] ure0: Ethernet address d0:37:45:77:56:3d
[ 5.312513] umass0 at uhub5 port 1 configuration 1 interface 0
[ 5.312513] umass0: Generic (0x14cd) Mass Storage Device (0x1212), rev 2.00/1.00, addr 3
[ 5.312513] umass0: using SCSI over Bulk-Only
[ 5.312513] scsibus0 at umass0: 2 targets, 1 lun per target
[ 5.312513] sd0 at scsibus0 target 0 lun 0: <Mass, Storage Device, 1.00> disk removable
[ 5.322528] sd0: fabricating a geometry
[ 5.322528] sd0: 15240 MB, 15240 cyl, 64 head, 32 sec, 512 bytes/sect x 31211520 sectors
[ 5.332448] sd0: fabricating a geometry
[ 5.332448] sd0: GPT GUID: 3ecec02f-e32f-45f7-8efb-4eccf8a2174c
[ 5.342581] dk0 at sd0: "EFI system", 262144 blocks at 2048, type: msdos
[ 5.342581] dk1 at sd0: "88433fbf-13a9-4373-8940-4ef32debd8f1", 2908160 blocks at 264192, type: ffs
[ 6.292793] uhidev0 at uhub5 port 2 configuration 1 interface 0
[ 6.292793] uhidev0: SIGMACHIP (0x1c4f) USB Keyboard (0x02), rev 1.10/1.50, addr 4, iclass 3/1
[ 6.292793] ukbd0 at uhidev0
[ 6.702845] wskbd0 at ukbd0: console keyboard, using wsdisplay0
[ 6.702845] uhidev1 at uhub5 port 2 configuration 1 interface 1
[ 6.702845] uhidev1: SIGMACHIP (0x1c4f) USB Keyboard (0x02), rev 1.10/1.50, addr 4, iclass 3/0
[ 6.702845] uhidev1: 2 report ids
[ 6.702845] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
[ 6.702845] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
[ 6.772817] WARNING: 1 error while detecting hardware; check system log.
[ 6.772817] boot device: sd0
[ 6.772817] root on dk1
[ 6.792813] root file system type: ffs
[ 6.802870] kern.module.path=/stand/amd64/9.0/modules
[ 6.802870] WARNING: clock gained 148 days
[ 317.746389] WARNING: module error: incompatible module class for `autofs' (3 != 2)
[ 318.846708] iscsi: attached. major = 203
[ 318.876666] WARNING: module error: incompatible module class for `lua' (3 != 1)
[ 318.876666] WARNING: module error: incompatible module class for `lua' (3 != 1)
[ 318.976701] WARNING: module error: incompatible module class for `nvmm' (3 != 1)
[ 318.976701] pad0: outputs: 44100Hz, 16-bit, stereo
[ 318.976701] audio1 at pad0: playback
[ 318.976701] audio1: slinear_le:16 -> slinear_le:16 2ch 44100Hz, blk 4ms for playback
[ 318.976701] spkr2 at audio1: PC Speaker (synthesized)
[ 318.976701] wsbell at spkr2 not configured
[ 318.976701] spkr2: detached
[ 318.976701] audio1: detached
[ 318.976701] pad0: detached
[ 318.976701] pad0: outputs: 44100Hz, 16-bit, stereo
[ 318.976701] audio1 at pad0: playback
[ 318.976701] audio1: slinear_le:16 -> slinear_le:16 2ch 44100Hz, blk 4ms for playback
[ 318.976701] spkr2 at audio1: PC Speaker (synthesized)
[ 318.976701] wsbell at spkr2 not configured
[ 318.976701] spkr2: detached
[ 318.976701] audio1: detached
[ 318.976701] pad0: detached
[ 318.976701] pad1: outputs: 44100Hz, 16-bit, stereo
[ 318.976701] audio1 at pad1: playback
[ 318.976701] audio1: slinear_le:16 -> slinear_le:16 2ch 44100Hz, blk 4ms for playback
[ 318.976701] spkr2 at audio1: PC Speaker (synthesized)
[ 318.976701] wsbell at spkr2 not configured
[ 318.976701] spkr2: detached
[ 318.976701] audio1: detached
[ 318.976701] pad1: detached
[ 318.976701] pad2: outputs: 44100Hz, 16-bit, stereo
[ 318.976701] audio1 at pad2: playback
[ 318.976701] audio1: slinear_le:16 -> slinear_le:16 2ch 44100Hz, blk 4ms for playback
[ 318.976701] spkr2 at audio1: PC Speaker (synthesized)
[ 318.976701] wsbell at spkr2 not configured
[ 318.976701] spkr2: detached
[ 318.976701] audio1: detached
[ 318.976701] pad2: detached
[ 318.976701] pad3: outputs: 44100Hz, 16-bit, stereo
[ 318.976701] audio1 at pad3: playback
[ 318.976701] audio1: slinear_le:16 -> slinear_le:16 2ch 44100Hz, blk 4ms for playback
[ 318.976701] spkr2 at audio1: PC Speaker (synthesized)
[ 318.976701] wsbell at spkr2 not configured
[ 318.976701] spkr2: detached
[ 318.976701] audio1: detached
[ 318.976701] pad3: detached
[ 319.076787] tap0: Ethernet address f2:0b:a4:09:ab:48
[ 319.076787] tap0: detached
[ 1074.766997] uid 0, pid 348, command wget, on /: file system full
[ 1247.650020] uid 0, pid 242, command wget, on /: file system full
-------------- next part --------------
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Root mount waiting for: usbus0 CAM usbus1
WARNING: WITNESS option enabled, expect reduced performance.
ugen1.1: <AMD EHCI root HUB> at usbus1
ugen0.1: <0x1022 XHCI root HUB> at usbus0
uhub0 on usbus0
uhub1 on usbus1
uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <M4-CT064M4SSD1 070H> ACS-2 ATA SATA 3.x device
ada0: Serial Number 000000001308092C5DEE
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 61056MB (125043311 512 byte sectors)
uhub0: 8 ports with 8 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.2: <Generic 4-Port USB 3.0 Hub> at usbus0
uhub2 on uhub0
uhub2: <Interrupt In Interface> on usbus0
uhub2: 4 ports with 3 removable, self powered
ugen1.2: <vendor 0x0438 product 0x7900> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> on usbus1
Root mount waiting for: usbus0 usbus1
ugen0.3: <Realtek USB 10/100/1000 LAN> at usbus0
uhub3: 4 ports with 4 removable, self powered
ugen1.3: <SIGMACHIP USB Keyboard> at usbus1
ukbd0 on uhub3
ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.50, addr 3> on usbus1
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.4: <Generic Mass Storage Device> at usbus0
umass0 on uhub0
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 3> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:1:0: Attached to scbus1
ugen0.5: <Generic 4-Port USB 2.0 Hub> at usbus0
uhub4 on uhub0
uhub4: <Generic 4-Port USB 2.0 Hub, class 9/0, rev 2.10/1.33, addr 4> on usbus0
uhub4: MTT enabled
uhub4: 4 ports with 3 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
random: unblocking device.
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain
ugen0.4: <Generic Mass Storage Device> at usbus0 (disconnected)
umass0: at uhub0, port 7, addr 3 (disconnected)
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Error 5, Retries exhausted
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
umass0: detached
ugen1.4: <Generic Mass Storage Device> at usbus1
umass0 on uhub3
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 4> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0xc100
umass0:1:0: Attached to scbus1
uma_zalloc_debug: zone "kenv" with the following non-sleepable locks held:
exclusive sleep mutex CAM device lock (CAM device lock) r = 0 (0xfffff80006060cd0) locked @ /usr/src/sys/cam/scsi/scsi_pass.c:674
stack backtrace:
#0 0xffffffff80c32891 at witness_debugger+0x71
#1 0xffffffff80c3382d at witness_warn+0x40d
#2 0xffffffff80efe586 at uma_zalloc_arg+0x46
#3 0xffffffff80b740ea at getenv_string_buffer+0x3a
#4 0xffffffff80b74817 at getenv_quad+0x17
#5 0xffffffff80b747e2 at getenv_int+0x12
#6 0xffffffff803a7f1a at daregister+0x1ea
#7 0xffffffff8037445b at cam_periph_alloc+0x57b
#8 0xffffffff803a7872 at daasync+0x2c2
#9 0xffffffff80381aa2 at xpt_async_process_dev+0x152
#10 0xffffffff8037d682 at xpt_async_process+0x312
#11 0xffffffff8037ddf2 at xpt_done_process+0x382
#12 0xffffffff8037fdb5 at xpt_done_td+0xf5
#13 0xffffffff80b830f0 at fork_exit+0x80
#14 0xffffffff8104150e at fork_trampoline+0xe
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <Mass Storage Device 1.00> Removable Direct Access SCSI device
da0: Serial Number 121220130416
da0: 40.000MB/s transfers
da0: 15240MB (31211520 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
WARNING: / was not properly dismounted
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
lo0: link state changed to UP
ure0 on uhub2
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 3.00/30.00, addr 2> on usbus0
uhid0 on uhub3
uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.50, addr 3> on usbus1
miibus1: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus1
rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: d0:37:45:77:56:3d
ue0: link state changed to DOWN
More information about the freebsd-usb
mailing list