AW: USB Virtualbox

[Hans Petter Selasky]

On 05/14/15 09:31, jurgenxiv at t-online.de wrote:
> Hi,
>
> I am setting hw.usb.ehci.no_hs: 0 -> 1.
> After that I connect my iPad. Speed still remains at HIGH according to usbconfig.
>
> "ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen1.2: <product 0x0020 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen0.2: <product 0x0020 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen1.3: <Mass Storage Device Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (250mA)
> ugen0.4: <USB-PS2 Optical Mouse Logitech> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (98mA)
> ugen0.3: <iPad Apple Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)"
>
> After issuing "usbconfig -d 0.1 reset" usbconfig shows this output and I have to reboot to get my mouse back:
>
> "ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen1.2: <product 0x0020 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen1.3: <Mass Storage Device Generic> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (250mA)"
>
> Jurgen

Try to set:

set hw.usb.ehci.no_hs=1

In the loader prompt before booting, if you are running 11-current.

--HPS