[Bug 197933] Change in support of USB 3.0 NEC uPD720200 (with JMS539 USB3 to SATA in a Vantec 4 drive box)

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=197933

--- Comment #1 from Greg <greg-org-freebsd at akua.com> ---
 $ dmesg | grep -i usb
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xcc429000-0xcc4293ff irq 16 at
device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xca100000-0xca101fff irq 16 at
device 0.0 on pci5
usbus1 on xhci0
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xcc428000-0xcc4283ff irq 23 at
device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus0: 480Mbps High Speed USB v2.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 480Mbps High Speed USB v2.0
ugen1.1: <0x1033> at usbus1
uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Intel> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen0.2: <vendor 0x8087> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus0
ugen2.2: <vendor 0x8087> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on
usbus2
ugen0.3: <vendor 0x08ff> at usbus0
ugen0.4: <Sonix Technology Co., Ltd.> at usbus0
ugen2.3: <JMicron> at usbus2
umass0: <MSC Bulk-Only Transport> on usbus2

 $ sudo usbconfig 
ugen1.1: <XHCI root HUB 0x1033> at usbus1, cfg=0 md=HOST spd=SUPER (5.0Gbps)
pwr=SAVE (0mA)
ugen0.1: <EHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen0.2: <product 0x0024 vendor 0x8087> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)
ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)
ugen0.3: <Fingerprint Sensor vendor 0x08ff> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON (100mA)
ugen0.4: <CNF9055 Sonix Technology Co., Ltd.> at usbus0, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (500mA)
ugen2.3: <USB to ATAATAPI Bridge JMicron> at usbus2, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON (8mA)

-- 
You are receiving this mail because:
You are the assignee for the bug.