Canon EOS 300D not working in -HEAD with gphoto 2.5.5
Hans Petter Selasky
hps at selasky.org
Sun Feb 8 08:58:54 UTC 2015
On 02/08/15 09:54, Matthias Apitz wrote:
>
> Hello,
>
> I have the above cam attached to an Acer C720 Chromebook running HEAD
> from January. gphoto can not read from the cam, it is detecting the name
> of the cam as EOS 300D but can not read bytes from USB. With truss the
> situation looks like this:
>
> ...
> open("/dev/ugen0.3",O_RDWR,00) = 5 (0x5)
> open("/dev/ugen0.3",O_RDWR,00) = 6 (0x6)
> ioctl(6,USB_GET_PLUGTIME,0xbfbf9f6c) = 0 (0x0)
> ioctl(6,USB_FS_INIT,0xbfbf9f70) = 0 (0x0)
> write(4,"\0",1) = 1 (0x1)
> ioctl(5,USB_IFACE_DRIVER_ACTIVE,0xbfbfa008) ERR#6 'Device not configured'
> write(2,"Detected a 'Canon:EOS 300D (norm"...,43) = 43 (0x2b)
> ioctl(5,USB_DO_REQUEST,0xbfbf9050) = 0 (0x0)
> write(2,"\n",1) = 1 (0x1)
> write(2,"*** Error *** \n",28) = 28 (0x1c)
> write(2,"Could not establish initial cont"...,48) = 48 (0x30)
>
> In messages on cam attach it says:
>
> Feb 8 09:41:06 c720-r276659 kernel: ugen0.3: <Canon Inc.> at usbus0
> Feb 8 09:41:06 c720-r276659 root: Unknown USB device: vendor 0x04a9 product 0x3084 bus uhub0
>
> Any ideas?
>
> matthias
>
Hi,
Did you chmod /dev/usb/X.Y.0 properly?
Output from usbdump will help.
--HPS
More information about the freebsd-usb
mailing list