[Bug 195811] New: Problem with axge driver for AX88179

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=195811

            Bug ID: 195811
           Summary: Problem with axge driver for AX88179
           Product: Base System
           Version: 10.1-RELEASE
          Hardware: amd64
                OS: Any
            Status: New
          Severity: Affects Many People
          Priority: ---
         Component: usb
          Assignee: freebsd-usb at FreeBSD.org
          Reporter: jseidel at unixsystem.org

All,

I am having an issue with the axge driver on 10.1-RELEASE, it was working
perfectly fine with 10.0-STABLE and since the upgrade it will work fine for
awhile then its like the device just turns off. The only way to fix it is to
either reboot of unplug the usb ethernet adapter and plug it back in.

I've tried it both as a module and building the driver into the kernel as well.
Same results.

This is from the messages log.

Dec  8 03:06:48 nuc kernel: <6<6>newnfs>n server ewnfs server
192.11692ne.w168.1
n0n.2f:s se/rMuvletri m1e9d2i.a16:8 .10n.o2t: /rMesupolndtiinmged
Dec  8 03:06:48 nuc kernel: i8e
Dec  8 03:06:48 nuc kernel:
Dec  8 03:06:48 nuc kernel: <<66>>wn.1fs0 .se2r:v/eMurlt im1e9d2.i1a6:8 .no1t0
.
2:/reMsultim
Dec  8 03:06:48 nuc kernel: epdionad:i ngnot r
Dec  8 03:06:48 nuc kernel: e
Dec  8 03:06:48 nuc kernel: sp<6>a: not respondoinng
Dec  8 03:06:48 nuc kernel: d
Dec  8 03:06:48 nuc kernel: ing
Dec  8 03:07:22 nuc kernel: ue0: link state changed to DOWN

Dec  8 03:13:39 nuc kernel: ugen0.2: <ASIX Elec. Corp.> at usbus0
(disconnected)
Dec  8 03:13:40 nuc kernel: axge0: at uhub0, port 12, addr 2 (disconnected)
Dec  8 03:13:40 nuc kernel: rgephy0: detached
Dec  8 03:13:40 nuc kernel: miibus0: detached
Dec  8 03:13:43 nuc kernel: ugen0.2: <ASIX Elec. Corp.> at usbus0
Dec  8 03:13:43 nuc kernel: axge0: <NetworkInterface> on usbus0
Dec  8 03:13:43 nuc kernel: axge0: <NetworkInterface> on usbus0
Dec  8 03:13:44 nuc kernel: miibus0: <MII bus> on axge0
Dec  8 03:13:44 nuc kernel: rgephy0: <RTL8169S/8110S/8211 1000BASE-T media
interface> PHY 3 on miibus0
Dec  8 03:13:44 nuc kernel: rgephy0:  none, 10baseT, 10baseT-FDX,
10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX,
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto,
auto-flow
Dec  8 03:13:44 nuc kernel: ue0: <USB Ethernet> on axge0
Dec  8 03:13:44 nuc kernel: ue0: Ethernet address: 8c:ae:4c:fd:2b:25
Dec  8 03:13:44 nuc devd: Executing '/etc/pccard_ether ue0 start'
Dec  8 03:13:44 nuc kernel: ue0: link state changed to DOWN
Dec  8 03:13:49 nuc kernel: ue0: link state changed to UP
Dec  8 03:13:49 nuc devd: Executing '/etc/rc.d/dhclient quietstart ue0'
Dec  8 03:13:52 nuc kernel: ue0: link state changed to DOWN
Dec  8 03:13:56 nuc kernel: ue0: link state changed to UP
Dec  8 03:13:56 nuc devd: Executing '/etc/rc.d/dhclient quietstart ue0'
Dec  8 03:14:02 nuc kernel: newnfs server 192.168.10.2:/Multimedia: is alive
again


Here is the usbconfig:
ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE (0mA)
ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps)
pwr=SAVE (0mA)
ugen1.2: <product 0x8000 vendor 0x8087> at usbus1, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=SAVE (0mA)
ugen0.2: <AX88179 ASIX Elec. Corp.> at usbus0, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=ON (124mA)

-- 
You are receiving this mail because:
You are the assignee for the bug.