Unable to attach USB mouse

[Hans Petter Selasky]

On 11/14/13 15:42, Eitan Adler wrote:
> On Thu, Nov 14, 2013 at 2:05 AM, Hans Petter Selasky <hps at bitfrost.no> wrote:
>> On 11/14/13 05:08, Eitan Adler wrote:
>>>
>>> The mouse driver fails to attach when plugging in my USB mouse.
>>>
>>> FreeBSD gravity.local 11.0-CURRENT FreeBSD 11.0-CURRENT #5 r257754:
>>> Thu Nov  7 12:12:51 EST 2013
>>> root at gravity.local:/usr/obj/usr/src/sys/EADLER  amd64
>>>
>>>>  From boot:
>>>
>>> [52341] ugen0.2: <Logitech> at usbus0
>>> [52341] ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev
>>> 2.00/27.20, addr 11> on usbus0
>>> [52341] ums0: 8 buttons and [XYZT] coordinates ID=0
>>> [54057] ugen0.2: <Logitech> at usbus0 (disconnected)
>>> [54057] ums0: at uhub0, port 1, addr 11 (disconnected)
>>> [54058] xhci_do_command: Command timeout!
>>> [54058] usb_alloc_device: set address 2 failed (USB_ERR_TIMEOUT, ignored)
>>
>>
>> What USB controllers does this system have?
>>
>> --HPS
>>
>
> [10005 root at gravity (100%) /home/eitan ]#usbconfig
> ugen0.1: <XHCI root HUB 0x8086> at usbus0, cfg=0 md=HOST spd=SUPER
> (5.0Gbps) pwr=SAVE (0mA)
> ugen2.1: <EHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=SAVE (0mA)
> ugen1.1: <EHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=SAVE (0mA)
> ugen2.2: <product 0x0024 vendor 0x8087> at usbus2, cfg=0 md=HOST
> spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen1.2: <product 0x0024 vendor 0x8087> at usbus1, cfg=0 md=HOST
> spd=HIGH (480Mbps) pwr=SAVE (0mA)
> ugen2.3: <Lenovo EasyCamera Azurewave> at usbus2, cfg=0 md=HOST
> spd=HIGH (480Mbps) pwr=ON (500mA)
> ugen1.4: <BCM20702A0 Broadcom Corp> at usbus1, cfg=0 md=HOST spd=FULL
> (12Mbps) pwr=ON (0mA)
> ugen1.3: <Linksys AE1000 Linksys> at usbus1, cfg=0 md=HOST spd=HIGH
> (480Mbps) pwr=ON (450mA)
>
>

pciconf -lv

--HPS