USB 3.0 HDD ILLEGAL REQUEST asc:20, 0 (Invalid command operation code)
Janaka Withana
jwithana at hotmail.com
Sat Jul 27 23:56:08 UTC 2013
guessed it was 1.2
> usbconfig -d 1.2 add_quirk UQ_MSC_NO_SYNC_CACHE
did not fix it
still get errors:
> kernel: (da1:umass-sim1:1:0:0): SYNCHRONIZE CACHE(10). CDB: 35 0 0 0 0 0 0
> 0 0 0
> kernel: (da1:umass-sim1:1:0:0): CAM status: SCSI Status Error
> kernel: (da1:umass-sim1:1:0:0): SCSI status: Check Condition
> kernel: (da1:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0
> (Invalid command operation code)
> kernel: (da1:umass-sim1:1:0:0): Error 22, Unretryable error
-----Original Message-----
From: Janaka Withana
Sent: Saturday, July 27, 2013 7:18 PM
To: Hans Petter Selasky ; freebsd-usb at freebsd.org
Subject: Re: USB 3.0 HDD ILLEGAL REQUEST asc:20, 0 (Invalid command
operation code)
RE: USB 3.0 HDD ILLEGAL REQUEST asc:20, 0 (Invalid command operation
code)thanks!
any idea the best way to determine the unit & addr of the device?
sorry for the follow-up newbie question, but the usbconfig man page is a bit
sparse.
From: Hans Petter Selasky
Sent: Saturday, July 27, 2013 1:37 AM
To: Janaka Withana ; freebsd-usb at freebsd.org
Subject: RE: USB 3.0 HDD ILLEGAL REQUEST asc:20, 0 (Invalid command
operation code)
usbconfig -d X.Y add_quirk UQ_MSC_NO_SYNC_CACHE--HPS -----Original
message-----> From:Janaka Withana <jwithana at hotmail.com>> Sent: Friday 26th
July 2013 23:37> To: freebsd-usb at freebsd.org> Subject: Re: USB 3.0 HDD
ILLEGAL REQUEST asc:20, 0 (Invalid command operation code)> > Sorry,> >
Seems one of the author suggested a fix.> > > Line to add to usb_quirk.c:> >
USB_QUIRK_VP(0x13fe, 0x2240, 0x0000, 0xffff, UQ_MSC_NO_SYNC_CACHE),> > Any
other workarounds you could suggest that would not require me to >
recompile? I am using nas4free embedded.> > -----Original Message----- >
From: Janaka Withana> Sent: Friday, July 26, 2013 5:33 PM> To:
freebsd-usb at freebsd.org> Subject: USB 3.0 HDD ILLEGAL REQUEST asc:20,0
(Invalid command operation > code)> > I am using FreeBSD 9.1 to p4 (Nas4Free
9.1.0.1.804) and get the following> repeated errors using a USB 3.0 hard
drive via a USB 3.0 port> > Jul 26 17:11:26 nas kernel:
(da1:umass-sim1:1:0:0): SYNCHRONIZE> CACHE(10). CDB: 35 0 0 0 0
0 0 0 0 0> Jul 26 17:11:26 nas kernel: (da1:umass-sim1:1:0:0): CAM
status: SCSI> Status Error> Jul 26 17:11:26 nas kernel:
(da1:umass-sim1:1:0:0): SCSI status:> Check Condition> Jul 26 17:11:26
nas kernel: (da1:umass-sim1:1:0:0): SCSI sense:> ILLEGAL REQUEST
asc:20,0 (Invalid command operation code)> Jul 26 17:11:26 nas
kernel: (da1:umass-sim1:1:0:0): Error 22,> Unretryable error> > Drive is zfs
formatted and seems to work without losing data. This issues> seems to keep
popping up:>
http://lists.freebsd.org/pipermail/freebsd-usb/2013-January/011850.html>
http://lists.freebsd.org/pipermail/freebsd-usb/2012-April/011179.html> >
Seems the last author proposed a fixL > >
_______________________________________________> freebsd-usb at freebsd.org
mailing list> http://lists.freebsd.org/mailman/listinfo/freebsd-usb> To
unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org">
_______________________________________________
freebsd-usb at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"
More information about the freebsd-usb
mailing list