usb d-link dwa-125

[Вячеслав Агапов]

i forgot
uname -a
FreeBSD 10.0-CURRENT #0 r244586:


2012/12/22 Вячеслав Агапов <agapov.slava at gmail.com>

> Hello all.
>
> I use usb wi-fi d-link dwa-125
> What I do:
> 1. insert usb
> 2. ugen2.2: <Ralink> at usbus2
> 3. usbconfig -d 2.2 dump_device_desc
> ugen2.2: <11n Adapter Ralink> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps)
> pwr=ON
>
>   bLength = 0x0012
>   bDescriptorType = 0x0001
>   bcdUSB = 0x0200
>   bDeviceClass = 0x0000
>   bDeviceSubClass = 0x0000
>   bDeviceProtocol = 0x0000
>   bMaxPacketSize0 = 0x0040
>   idVendor = 0x2001
>  [b] idProduct = 0x3c1e [/b]
>   bcdDevice = 0x0101
>   iManufacturer = 0x0001  <Ralink>
>   iProduct = 0x0002  <11n Adapter>
>   iSerialNumber = 0x0003  <1.0>
>   bNumConfigurations = 0x0001
> 4.
> in /usr/src/sys/dev/usb/usbdevs added
> product DLINK DWA125        0x3c1e    DWA-125
> in /usr/src/sys/dev/usb/usbdevs added
> RUN_DEV(DLINK,        DWA125),
> and then
> cd /usr/src/sys/modules/usb/run
> make
> 5. load new kernel module
> kldload ./if_run.ko
>
> 6. dmesg
> run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2
> run0: MAC/BBP RT5390 (rev 0x0503), RF unknown (MIMO 1T1R), address
> bc:f6:85:f8:d1:90
>
> 7. ifconfig wlan0 create wlandev run0 wlanmode hostap
> ifconfig wlan0 create wlandev run0 wlanmode hostap
>
> 8. After this, my usb is crashed
> in dmesg
> wlan0: Ethernet address: bc:f6:85:f8:d1:90
> run0: firmware RT3071 ver. 0.236 loaded
> wlan0: ieee80211_new_state_locked: pending INIT -> SCAN transition lost
> run0: at uhub2, port 4, addr 2 (disconnected)
> usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED,
> ignored)
> usbd_req_re_enumerate: addr=2, set address failed! (USB_ERR_STALLED,
> ignored)
> ugen2.2: <Ralink> at usbus2 (disconnected)
>
> Help me with this, please.
>
>