usb/159274: USB 3.0 Etron EJ168A does not work.
Jason Seidel
jseidel at unixsystem.org
Sun Jul 31 00:30:12 UTC 2011
The following reply was made to PR usb/159274; it has been noted by GNATS.
From: "Jason Seidel" <jseidel at unixsystem.org>
To: Peter Jeremy <peterjeremy at acm.org>
Cc:
Subject: Re: usb/159274: USB 3.0 Etron EJ168A does not work.
Date: Sat, 30 Jul 2011 20:17:01 -0400
I'm not sure which Id it is there are usb2 and 3 controllers on the board.
I just ran kldload xhci, here is what is displayed.
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe900000-0xfe907fff irq 18 at
device 0.0 on pci5
xhci0: [ITHREAD]
xhci0: Driver does not support 64-byte contexts.xhci0: XHCI halt/start/probe
failed err=18
device_attach: xhci0 attach returned 6
# pciconf -lc
hostb0 at pci0:0:0:0: class=0x060000 card=0x15101849 chip=0x15101022
rev=0x00 hdr=0x00
vgapci0 at pci0:0:1:0: class=0x030000 card=0x98021849 chip=0x98021002
rev=0x00 hdr=0x00
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
cap 05[a0] = MSI supports 1 message, 64 bit
ecap 000b[100] = unknown 1
hdac0 at pci0:0:1:1: class=0x040300 card=0x13141849 chip=0x13141002
rev=0x00 hdr=0x00
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root endpoint max data 128(128) link x0(x0)
cap 05[a0] = MSI supports 1 message, 64 bit enabled with 1 message
ecap 000b[100] = unknown 1
pcib1 at pci0:0:4:0: class=0x060400 card=0x12341022 chip=0x15121022
rev=0x00 hdr=0x01
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x4)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x12341022
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
atapci0 at pci0:0:17:0: class=0x010601 card=0x43911849 chip=0x43911002
rev=0x40 hdr=0x00
cap 12[70] = SATA Index-Data Pair
cap 13[a4] = PCI Advanced Features: FLR TP
ohci0 at pci0:0:18:0: class=0x0c0310 card=0x43971849 chip=0x43971002
rev=0x00 hdr=0x00
ehci0 at pci0:0:18:2: class=0x0c0320 card=0x43961849 chip=0x43961002
rev=0x00 hdr=0x00
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
ohci1 at pci0:0:19:0: class=0x0c0310 card=0x43971849 chip=0x43971002
rev=0x00 hdr=0x00
ehci1 at pci0:0:19:2: class=0x0c0320 card=0x43961849 chip=0x43961002
rev=0x00 hdr=0x00
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
none0 at pci0:0:20:0: class=0x0c0500 card=0x43851849 chip=0x43851002
rev=0x42 hdr=0x00
atapci1 at pci0:0:20:1: class=0x01018a card=0x439c1849 chip=0x439c1002
rev=0x40 hdr=0x00
hdac1 at pci0:0:20:2: class=0x040300 card=0x18921849 chip=0x43831002
rev=0x40 hdr=0x00
cap 01[50] = powerspec 2 supports D0 D3 current D0
isab0 at pci0:0:20:3: class=0x060100 card=0x439d1849 chip=0x439d1002
rev=0x40 hdr=0x00
pcib2 at pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002
rev=0x40 hdr=0x01
ohci2 at pci0:0:20:5: class=0x0c0310 card=0x43991849 chip=0x43991002
rev=0x00 hdr=0x00
pcib3 at pci0:0:21:0: class=0x060400 card=0x00001002 chip=0x43a01002
rev=0x00 hdr=0x01
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root port max data 128(128) link x16(x1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x00001002
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
pcib4 at pci0:0:21:1: class=0x060400 card=0x00001002 chip=0x43a11002
rev=0x00 hdr=0x01
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x00001002
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
pcib5 at pci0:0:21:2: class=0x060400 card=0x00001002 chip=0x43a21002
rev=0x00 hdr=0x01
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1)
cap 05[a0] = MSI supports 1 message, 64 bit
cap 0d[b0] = PCI Bridge card=0x00001002
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 000b[100] = unknown 1
ohci3 at pci0:0:22:0: class=0x0c0310 card=0x43971849 chip=0x43971002
rev=0x00 hdr=0x00
ehci2 at pci0:0:22:2: class=0x0c0320 card=0x43961849 chip=0x43961002
rev=0x00 hdr=0x00
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
hostb1 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x17001022
rev=0x43 hdr=0x00
hostb2 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x17011022
rev=0x00 hdr=0x00
hostb3 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x17021022
rev=0x00 hdr=0x00
hostb4 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x17031022
rev=0x00 hdr=0x00
cap 0f[f0] = unknown
hostb5 at pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x17041022
rev=0x00 hdr=0x00
hostb6 at pci0:0:24:5: class=0x060000 card=0x00000000 chip=0x17181022
rev=0x00 hdr=0x00
hostb7 at pci0:0:24:6: class=0x060000 card=0x00000000 chip=0x17161022
rev=0x00 hdr=0x00
hostb8 at pci0:0:24:7: class=0x060000 card=0x00000000 chip=0x17191022
rev=0x00 hdr=0x00
em0 at pci0:1:0:0: class=0x020000 card=0xa01f8086 chip=0x10d38086 rev=0x00 hdr=0x00
cap 01[c8] = powerspec 2 supports D0 D3 current D0
cap 05[d0] = MSI supports 1 message, 64 bit
cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
cap 11[a0] = MSI-X supports 5 messages in map 0x1c enabled
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0003[140] = Serial 1 001b21ffffa953fa
re0 at pci0:4:0:0: class=0x020000 card=0x81681849 chip=0x816810ec rev=0x06 hdr=0x00
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[70] = PCI-Express 2 endpoint IRQ 2 max data 128(256) link x1(x1)
cap 11[b0] = MSI-X supports 4 messages in map 0x20
cap 03[d0] = VPD
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected
ecap 0002[140] = VC 1 max VC0
ecap 0003[160] = Serial 1 01000000684ce000
none1 at pci0:5:0:0: class=0x0c0330 card=0x70231849 chip=0x70231b6f
rev=0x01 hdr=0x00
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[70] = MSI supports 4 messages, 64 bit, vector masks
cap 10[a0] = PCI-Express 2 endpoint max data 128(1024) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0003[190] = Serial 1 0101010101010101
i have not tried 9 yet at all.
---------- Original Message -----------
From: Peter Jeremy <peterjeremy at acm.org>
To: Jason Seidel <jseidel at unixsystem.org>
Cc: freebsd-gnats-submit at FreeBSD.org
Sent: Sun, 31 Jul 2011 09:06:31 +1000
Subject: Re: usb/159274: USB 3.0 Etron EJ168A does not work.
> On 2011-Jul-28 21:25:45 +0000, Jason Seidel <jseidel at unixsystem.org>
> wrote:
> >I have an ASrock E350M1/USB3 motherboard running freebsd 8.2.
> >If I enable xhci in the kernel, not only does it not detect the usb 3.0
controler, it causes the machine to go into a constant booting loop.
> >
> >I have tried just adding "device xhci" to the kernel and also building the
kernel by removing ehci, it still causing the machine to go into a booting loop.
>
> Unfortunately, this isn't enough information to allow the problem to
> be investigated. - What is the PCI id of your USB3 controller? This
> is available from pciconf. - At what point does the system reboot &
> what is displayed immediately before the reboot. - What happens if
> you boot GENERIC and kldload xhci? - Can you gheck if the problem
> still exists with 9-CURRENT
>
> --
> Peter Jeremy
------- End of Original Message -------
More information about the freebsd-usb
mailing list