usb/151043: Please add USB device MELCO WLR-UC-G
TAKANO Yuji
takachan at running-dog.net
Mon Oct 4 07:00:19 UTC 2010
The following reply was made to PR usb/151043; it has been noted by GNATS.
From: TAKANO Yuji <takachan at running-dog.net>
To: hselasky at c2i.net
Cc: freebsd-usb at freebsd.org, freebsd-gnats-submit at freebsd.org,
takachan at running-dog.net
Subject: Re: usb/151043: Please add USB device MELCO WLR-UC-G
Date: Mon, 04 Oct 2010 15:01:27 +0900 (JST)
Hi.
From: Hans Petter Selasky <hselasky at c2i.net>さん
> On Wednesday 29 September 2010 03:51:10 TAKANO Yuji wrote:
> > >Number: 151043
> > >Category: usb
> > >Synopsis: Please add USB device MELCO WLR-UC-G
> > >Confidential: no
> > >Severity: non-critical
> > >Priority: medium
> > >Responsible: freebsd-usb
> > >State: open
> > >Quarter:
> > >Keywords:
> > >Date-Required:
> > >Class: change-request
> > >Submitter-Id: current-users
> > >Arrival-Date: Wed Sep 29 02:00:11 UTC 2010
> > >Closed-Date:
> > >Last-Modified:
> > >Originator: TAKANO Yuji
> > >Release: FreeBSD 8.1-STABLE amd64
> > >Organization:
> >
> > >Environment:
> > FreeBSD rocky.running-dog.net 8.1-STABLE FreeBSD 8.1-STABLE #0: Sun Sep 26
> > 16:58:40 JST 2010
> > takachan at rocky.running-dog.net:/usr/obj/usr/src/sys/Rocky_8.1-STABLE_AMD64
> > _SMP_Kernel amd64
> >
> > >Description:
> > I give it a patch.
> >
> > >How-To-Repeat:
> >
> > >Fix:
> > I give it a patch.
> >
> >
> >
> > Patch attached with submission follows:
> >
> > diff -urN ./usb.orig/usbdevs ./usb/usbdevs
> > --- ./usb.orig/usbdevs 2010-09-29 10:07:46.000000000 +0900
> > +++ ./usb/usbdevs 2010-09-29 02:35:38.000000000 +0900
> > @@ -2096,6 +2096,8 @@
> > product MELCO KG54L 0x00da WLI-U2-KG54L
> > product MELCO WLIUCG300N 0x00e8 WLI-UC-G300N
> > product MELCO SG54HG 0x00f4 WLI-U2-SG54HG
> > +product MELCO WLRUCG 0x0116 WLR-UC-G
> > +product MELCO WLRUCGAOSS 0x0119 WLR-UC-G-AOSS
> > product MELCO WLIUCAG300N 0x012e WLI-UC-AG300N
> > product MELCO RT2870_1 0x0148 RT2870
> > product MELCO RT2870_2 0x0150 RT2870
> > diff -urN ./usb.orig/wlan/if_rum.c ./usb/wlan/if_rum.c
> > --- ./usb.orig/wlan/if_rum.c 2010-09-01 10:41:33.000000000 +0900
> > +++ ./usb/wlan/if_rum.c 2010-09-29 02:39:28.000000000 +0900
> > @@ -118,6 +118,8 @@
> > RUM_DEV(HUAWEI3COM, WUB320G),
> > RUM_DEV(MELCO, G54HP),
> > RUM_DEV(MELCO, SG54HP),
> > + RUM_DEV(MELCO, WLRUCG),
> > + RUM_DEV(MELCO, WLRUCGAOSS),
> > RUM_DEV(MSI, RT2573_1),
> > RUM_DEV(MSI, RT2573_2),
> > RUM_DEV(MSI, RT2573_3),
> >
> > >Release-Note:
> > >Audit-Trail:
> >
> > >Unformatted:
> > _______________________________________________
> > freebsd-usb at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> > To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"
>
> Can you send output from:
>
> usbconfig -d X.Y dump_device_desc
>
> where X and Y are the numbers after "ugen"
>
> ?
There is two fashion to this device(MELCO WLR-UC-G).
The one is a client mode.
The one is already an access point mode.
Two modes change it with dipswitch.
1. WLR-UC-G (Client Mode)
# usbconfig -d 2.2 dump_device_desc
ugen2.2: <WLR-UC-G Buffalo> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x0411
idProduct = 0x0116
bcdDevice = 0x0001
iManufacturer = 0x0001 <Buffalo>
iProduct = 0x0002 <WLR-UC-G>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
2. WLR-UC-G-AOSS (AP Mode)
# usbconfig -d 2.2 dump_device_desc
ugen2.2: <WLR-UC-G Buffalo> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x0000
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x0411
idProduct = 0x0119
bcdDevice = 0x0001
iManufacturer = 0x0001 <Buffalo>
iProduct = 0x0002 <WLR-UC-G>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001
Thanking you in advance.
More information about the freebsd-usb
mailing list