Mouse and HDD problem

[Hans Petter Selasky]

On Thursday 22 July 2010 22:11:16 Nicolas wrote:
> Hi,
> 
> I'm using FreeBSD-9 current and i have a strange problem with my usb
> hard drive.
> My logitech usb mouse is plugged in and when i plug my hdd, i have this
> message:
> 
> ugen3.2: <Logitech> at usbus3 (disconnected)
> ums0: at uhub3, port 1, addr 2 (disconnected)
> ugen7.4: <Maxtor> at usbus7
> umass0: <Maxtor Maxtor OneTouch III, class 0/0, rev 2.00/0.01, addr 4>
> on usbus7
> umass0:  SCSI over Bulk-Only; quirks = 0x0000
> umass0:2:0:-1: Attached to scbus2
> da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
> da0: <Maxtor OneTouch III 0364> Fixed Direct Access SCSI-4 device
> da0: 40.000MB/s transfers
> da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
> GEOM: da0s1: geometry does not match label (64h,32s != 255h,63s).
> GEOM: ufsid/4c0e3769aa2965dbs1: geometry does not match label (64h,32s
> != 255h,63s).
> ugen3.2: <Logitech> at usbus3
> ums0: <Logitech USB RECEIVER, class 0/0, rev 1.10/25.10, addr 2> on usbus3
> ums0: 16 buttons and [XYZT] coordinates ID=0
> pid 1843 (Xorg), uid 0: exited on signal 6 (core dumped)
> pid 1888 (polkit-gnome-authen), uid 92: exited on signal 4 (core dumped)
> 
> My mouse disconnects itself then reconnect and Xorg crash.
> Someone have this problem ?

I've also seen panics when inserting certain USB dongles. Probably there are 
some bugs in the HAL layer. Maybe there is some missing information about the 
USB device that makes it crash.

--HPS