huawei card

[Hug Me]

I've been having all sorts of trouble with this card. I've tried it
several ways. umass in the kernel, umass loaded manually, umass not
loaded at all... u3g in loaded manually or in the kernel, ubsa loaded
manually or in the kernel. I can't seem to get it detected as anything
except a storage device. I've tried the camcontrol eject and when it
comes back I still don't see the device....

here is some of what I see:

significant lines from boot with device in place
...
umass0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00,
addr 2> on uhub0
umass1: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00,
addr 2> on uhub0
...
(probe2:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe2:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe2:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe2:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe2:umass-sim0:0:0:0): Medium not present
(probe2:umass-sim0:0:0:0): Unretryable error
(probe3:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe3:umass-sim1:1:0:0): CAM Status: SCSI Status Error
(probe3:umass-sim1:1:0:0): SCSI Status: Check Condition
(probe3:umass-sim1:1:0:0): NOT READY asc:3a,0
(probe3:umass-sim1:1:0:0): Medium not present
(probe3:umass-sim1:1:0:0): Unretryable error
(probe0:mpt0:0:8:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:mpt0:0:8:0): CAM Status: SCSI Status Error
(probe0:mpt0:0:8:0): SCSI Status: Check Condition
(probe0:mpt0:0:8:0): UNIT ATTENTION asc:29,0
(probe0:mpt0:0:8:0): Power on, reset, or bus device reset occurred
(probe0:mpt0:0:8:0): Retrying Command (per Sense Data)
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <IBM 25P3495a S320  1 1> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at mpt0 bus 0 target 0 lun 0
da0: <LSILOGIC 1030 IM 1000> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit)
da0: Command Queueing Enabled
da0: 34702MB (71071561 512 byte sectors: 255H 63S/T 4424C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
da1 at umass-sim1 bus 1 target 0 lun 0
da1: <HUAWEI MMC Storage 2.31> Removable Direct Access SCSI-2 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device
cd0: 1.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present


with umass not loaded:
Unknown USB device: vendor 0x12d1 product 0x1414 bus uhub0
ugen0: <HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00,
addr 2> on uhub0

# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
(0x1166)(0x0000), rev 1.00
 port 1 powered
 port 2 addr 2: full speed, self powered, config 1, HUAWEI
Mobile(0x1414), HUAWEI Technology(0x12d1), rev 0.00
 port 3 powered
 port 4 powered


Thanks for your help!


-- 
        *******************************************************************
        Don't ever forget to
                -*HUGME*-

Yield to Temptation ... it may not pass your way again.
                -- Lazarus Long, "Time Enough for Love"