quirks? camcontrol rescan/reset all not updating inserted/removed cards in flashreader.

[Hans Petter Selasky]

On Thursday 22 October 2009 05:37:27 Steve Franks wrote:
> 8RC1 - I sortof hoped for a usb upgrade with the new release, but my
> internal reader is still only functional for cards that were inserted
> on bootup (behavior is same for external readers, but they can easily
> be unplugged from usb).
>
> I'd like to become a usb super-hacker and play with the quirks file
> and all that, but I don't even know where to start.  Is there a usb
> handbook?
>

Try to reset your unit:

usbconfig -u X -a Y reset

X and Y are numbers after ugen.

--HPS

> Best,
> Steve
>
> umass0:2:0:-1: Attached to scbus2
> Root mount waiting for: usbus4
> Trying to mount root from ufs:/dev/ad0s1a
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): UNIT ATTENTION csi:0,aa,55,43 asc:28,0
> (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have
> changed field replaceable unit: 1
> (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 15534MB (31813632 512 byte sectors: 255H 63S/T 1980C)
> _______________________________________________
> freebsd-usb at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"