usb2 quirks

[Alexander Best]

Thanks a lot. There are two more questions i'd like to ask:

1. where can i find <vid>, <pid>, <lo_rev> and <hi_rev> in the following
device_desc dump?

ugen3.2: <MiniPlayer Meizu   Electronics> at usbus3, cfg=0 md=HOST spd=HIGH
(480Mbps) pwr=ON

  bLength = 0x0012
  bDescriptorType = 0x0001
  bcdUSB = 0x0200
  bDeviceClass = 0x0000
  bDeviceSubClass = 0x0000
  bDeviceProtocol = 0x0000
  bMaxPacketSize0 = 0x0040
  idVendor = 0x0492
  idProduct = 0x0140
  bcdDevice = 0x0100
  iManufacturer = 0x0001  <Meizu   Electronics         >
  iProduct = 0x0002  <MiniPlayer>
  iSerialNumber = 0x0003  <000000F1F1000>
  bNumConfigurations = 0x0001

2. what are the usb2 equivalents to the following usb1 quirks:
   UMASS_PROTO_SCSI | UMASS_PROTO_BBB,
   NO_INQUIRY | NO_SYNCHRONIZE_CACHE

right now i'm getting the following error message when attaching the device:

ugen3.2: <Meizu   Electronics> at usbus3
umass0: <Meizu   Electronics MiniPlayer, class 0/0, rev 2.00/1.00, addr 2> on
usbus3
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:7:0:-1: Attached to scbus7
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry

cheers.
Alex

Hans Petter Selasky schrieb am 2008-12-23:
> On Tuesday 23 December 2008, Alexander Best wrote:
> > hi there,

> > could somebody tell me where i can find info about the quirk
> > settings used
> > in usbconfig (usb2) please? i had a look at usbconfig(8), but the
> > manual
> > doesn't contain any information concerning usb quirks.


> Hi,

> If you type:

> usbconfig -h

> You see that you have the following quirk commands available:

>   add_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>
>   remove_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>
>   dump_quirk_names
>   dump_device_quirks

> Before you can use quirks you need to:

> kldload usb2_quirk

> --HPS