usb/128425: Cannot Connect Maxtor Onetouch 4 USB drive

[Joe Kelsey]

>Number:         128425
>Category:       usb
>Synopsis:       Cannot Connect Maxtor Onetouch 4 USB drive
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-usb
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Oct 28 00:50:01 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator:     Joe Kelsey
>Release:        FreeBSD 7.1-PRERELEASE amd64
>Organization:
Joseph M. Kelsey
>Environment:
System: FreeBSD zircon.zircon.seattle.wa.us 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #25: Fri Oct 24 14:11:16 PDT 2008 root at zircon.zircon.seattle.wa.us:/usr/obj/usr/src/sys/ZIRCON amd64

>Description:
	I just purchased a Maxtor Onetouch 4 UDB drive as an add-on to
	my system.  I did not expect that the "onetouch" part would ever
	work, it was just a cheap 750G drive.  When I plug it in, I get
	the following stuff from the dmesg log:

cam_periph_alloc: attempt to re-allocate valid device cd0 rejected
cdasync: Unable to attach new device due to status 0x6
cam_periph_alloc: attempt to re-allocate valid device pass1 rejected
passasync: Unable to attach new device due to status 0x6: CCB request was invalid

	I also have a 80G USB drive (no name) and a wireless Logitech
	USB mouse plugged in.

	Here is the output of usbdevs -vd:

Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
  uhub0
 port 1 addr 2: low speed, power 70 mA, config 1, USB RECEIVER(0xc50e), Logitech(0x046d), rev 25.10
   ums0
 port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
  uhub1
 port 1 powered
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
  uhub2
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA(0x0000), rev 1.00
  uhub3
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), VIA(0x0000), rev 1.00
  uhub4
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 addr 2: high speed, self powered, config 1, Storage(0x1240), USB(0x13fd), rev 1.04
   umass0
 port 7 powered
 port 8 powered

	The maxtor is attached to the same cable that the da0 uses.  I
	had a real hard time actually getting a connection to work and I
	ended up using the little pigtail off the working drive
	connector.

>How-To-Repeat:
	Attach Maxtor Onetouch4 USB drive to system.

>Fix:

	


>Release-Note:
>Audit-Trail:
>Unformatted: