usb/122992: MotoROKR Z6 Phone not recognised by umass as USB disk

[Oleksii Krykun]

The following reply was made to PR usb/122992; it has been noted by GNATS.

From: "Oleksii Krykun" <okrg at ukr.net>
To: bug-followup at FreeBSD.org,gemellus at sdf.lonestar.org
Cc:  
Subject: Re: usb/122992: MotoROKR Z6 Phone not recognised by umass as USB disk
Date: Wed, 30 Jul 2008 11:45:37 +0300

 I got the same problem under 7.0-RELEASE.
 
 From dmesg:
 
 Jul 30 08:53:26 kws kernel: usb0: <UHCI (generic) USB controller> on uhci0
 Jul 30 08:53:26 kws kernel: usb0: USB revision 1.0
 Jul 30 08:53:26 kws kernel: uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
 Jul 30 08:53:26 kws kernel: usb1: <UHCI (generic) USB controller> on uhci1
 Jul 30 08:53:26 kws kernel: usb1: USB revision 1.0
 Jul 30 08:53:26 kws kernel: uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
 Jul 30 08:53:26 kws kernel: usb2: <UHCI (generic) USB controller> on uhci2
 Jul 30 08:53:26 kws kernel: usb2: USB revision 1.0
 Jul 30 08:53:26 kws kernel: uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
 Jul 30 08:53:26 kws kernel: usb3: <UHCI (generic) USB controller> on uhci3
 Jul 30 08:53:26 kws kernel: usb3: USB revision 1.0
 Jul 30 08:53:26 kws kernel: uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
 Jul 30 08:53:26 kws kernel: usb4: EHCI version 1.0
 Jul 30 08:53:26 kws kernel: usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
 Jul 30 08:53:26 kws kernel: usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
 Jul 30 08:53:26 kws kernel: usb4: USB revision 2.0
 Jul 30 08:53:26 kws kernel: uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
 
 After Z6 connecting I see following:
 
 ul 30 09:24:09 kws kernel: umass0: <Motorola Inc. MS, class 0/0, rev 2.00/1.01, addr 2> on uhub4
 Jul 30 09:24:09 kws kernel: umass0:0:0:-1: Attached to scbus0
 Jul 30 09:24:09 kws root: Unknown USB device: vendor 0x22b8 product 0x6426 bus uhub4
 
 kws# usbdevs -vd
 Controller /dev/usb0:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
   uhub0
  port 1 powered
  port 2 powered
 Controller /dev/usb1:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
   uhub1
  port 1 powered
  port 2 powered
 Controller /dev/usb2:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
   uhub2
  port 1 powered
  port 2 powered
 Controller /dev/usb3:
 addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
   uhub3
  port 1 powered
  port 2 powered
 Controller /dev/usb4:
 addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
   uhub4
  port 1 powered
  port 2 powered
  port 3 addr 2: high speed, power 500 mA, config 1, MS(0x6426), Motorola Inc.(0x22b8), rev 1.01
    umass0
  port 4 powered
  port 5 powered
  port 6 powered
  port 7 powered
  port 8 powered
 
 kws# camcontrol devlist -v
 scbus0 on umass-sim0 bus 0:
 
 So, umass0 line and scbus0 are attached but no daX devices.