apcupsd: bsd-usb.c:774 set_report for kill power function SelftestStatus failed.

[Andrei Kolu]

On Tuesday 22 January 2008 15:26:30 Andrei Kolu wrote:
> ugen0: American Power Conversion Smart-UPS 750 FW:651.13.I USB FW:7.3, rev
> 1.10/0.06, addr 2
>
>
> # apctest
>
> 2008-01-22 15:23:57 apctest 3.14.2 (15 September 2007) freebsd
> Checking configuration ...
> Attached to driver: usb
> sharenet.type = DISABLE
> cable.type = USB_CABLE
>
> You are using a USB cable type, so I'm entering USB test mode
> mode.type = USB_UPS
> Setting up the port ...
> Hello, this is the apcupsd Cable Test program.
> This part of apctest is for testing USB UPSes.
>
> Getting UPS capabilities...SUCCESS
>
> Please select the function you want to perform.
>
> 1) Test kill UPS power
> 2) Perform self-test
> 3) Read last self-test result
> 4) Change battery date
> 5) View battery date
> 6) View manufacturing date
> 7) Set alarm behavior
> 8) Set sensitivity
> 9) Quit
>
> Select function number: 2
>
>
> This test instructs the UPS to perform a self-test
> operation and reports the result when the test completes.
>
> Clearing previous self test result...2.918 apcupsd: bsd-usb.c:774
> set_report for kill power function SelftestStatus failed.
> FAILED
> _______________________________________________
Oops, I forgot to add that this is FreeBSD 6.2-p10. Same problem with other 
APC ups 1000 with FreeBSD 6.3-RELEASE. I just don't know if this is an 
apcupsd daemon problem or FreeBSD USB stack- any hint, please?