usb/116699: [usbhid] USB HID devices do not initialize at
system boot
Viktor Ivanov
viktor.ivanov at gmail.com
Tue Feb 26 20:40:02 UTC 2008
The following reply was made to PR usb/116699; it has been noted by GNATS.
From: "Viktor Ivanov" <viktor.ivanov at gmail.com>
To: bug-followup at FreeBSD.org, achilov-rn at askd.ru
Cc:
Subject: Re: usb/116699: [usbhid] USB HID devices do not initialize at system boot
Date: Tue, 26 Feb 2008 22:03:58 +0200
------=_Part_24187_23082213.1204056238094
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
I have the same problem with a P35-based motherboard (ASUS P5K).
Tested with 7.0-RC2 and 7.0-RC3.
The workaround is the same - plug out the keyboard (and the mouse) and then
plug them back in.
I'm open to any kind of experimental patches and/or pointers what to fix in
the kernel.
Here's the dmesg from an almost GENERIC kernel (i can rebuild GENERIC and
work on that too if needed):
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RC3 #0: Fri Feb 22 21:49:13 EET 2008
root at caliban.v0r.biz:/usr/obj/usr/src/sys/CALIBAN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (2138.19-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 3489136640 (3327 MB)
avail memory = 3409944576 (3251 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 22 2008 21:49:01)
acpi0: <NEC > on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 70,
should be 6F [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem
0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 16 at
device 0.0 on pci1
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device
26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device
26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device
26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbfffc00-0xfbffffff irq 18
at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: waiting for BIOS to give up control
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
ugen0: <vendor 0x0c45 USB20 Camera, class 0/0, rev 2.00/1.00, addr 2> on
uhub3
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB363 SATA300 controller> port
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem
0xfeafe000-0xfeafffff irq 16 at device 0.0 on pci3
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI Version 01.00 controller with 2 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
pci2: <network, ethernet> at device 0.0 (no driver attached)
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device
29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device
29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device
29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbfff800-0xfbfffbff irq 23
at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebffc00-0xfebffcff irq 17 at device 1.0 on pci5
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:0e:2e:7f:36:fb
rl0: [ITHREAD]
pci5: <multimedia, audio> at device 2.0 (no driver attached)
pci5: <serial bus, FireWire> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port
0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f
irq 22 at device 31.2 on pci0
atapci1: [ITHREAD]
ata5: <ATA channel 0> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci1
ata6: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port
0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f
irq 22 at device 31.5 on pci0
atapci2: [ITHREAD]
ata7: <ATA channel 0> on atapci2
ata7: [ITHREAD]
ata8: <ATA channel 1> on atapci2
ata8: [ITHREAD]
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
pmtimer0 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: DVDR <HL-DT-STDVD-RAM GSA-H22N/1.00> at ata4-master PIO4
ad10: 305245MB <Seagate ST3320620AS 3.AAE> at ata5-master SATA150
ad14: 305245MB <Seagate ST3320620AS 3.AAE> at ata7-master SATA150
SMP: AP CPU #1 Launched!
GEOM_LABEL: Label for provider ad10s1 is ntfs/XP.
GEOM_LABEL: Label for provider ad10s5 is ntfs/Yo.
GEOM_LABEL: Label for provider ad14s1 is ntfs/Piglet.
Trying to mount root from ufs:/dev/ad10s3a
The DVD is not using DMA because I disabled it. The firewire was not
detected because I disabled that also.
This is what happens when I replug the keyboard and the mouse (they're two
separate devices connected to two adjacent USB ports on the back of the PC;
the mouse is wireless; the keyboard is wired).
ums0: <Logitech USB RECEIVER, class 0/0, rev 1.10/25.10, addr 2> on uhub1
ums0: 16 buttons and Z dir.
uhub8: <vendor 0x046d G11 Keyboard, class 9/0, rev 1.10/1.71, addr 3> on
uhub1
uhub8: 4 ports with 2 removable, bus powered
ukbd0: <vendor 0x046d Gaming Keyboard, class 0/0, rev 2.00/1.90, addr 4> on
uhub8
kbd2 at ukbd0
uhid0: <vendor 0x046d Gaming Keyboard, class 0/0, rev 2.00/1.90, addr 4> on
uhub8
uhid1: <vendor 0x046d G11 Keyboard, class 0/0, rev 2.00/1.71, addr 5> on
uhub8
------=_Part_24187_23082213.1204056238094
Content-Type: text/html; charset=UTF-8
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
I have the same problem with a P35-based motherboard (ASUS P5K).<br>Tested with 7.0-RC2 and 7.0-RC3.<br>The workaround is the same - plug out the keyboard (and the mouse) and then plug them back in.<br>I'm open to any kind of experimental patches and/or pointers what to fix in the kernel.<br>
<br>Here's the dmesg from an almost GENERIC kernel (i can rebuild GENERIC and work on that too if needed):<br><br>Copyright (c) 1992-2008 The FreeBSD Project.<br>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br>
The Regents of the University of California. All rights reserved.<br>FreeBSD is a registered trademark of The FreeBSD Foundation.<br>FreeBSD 7.0-RC3 #0: Fri Feb 22 21:49:13 EET 2008<br> root at caliban.v0r.biz:/usr/obj/usr/src/sys/CALIBAN<br>
Timecounter "i8254" frequency 1193182 Hz quality 0<br>CPU: Intel(R) Core(TM)2 CPU 6420 @ 2.13GHz (2138.19-MHz 686-class CPU)<br> Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6<br> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE><br>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM><br> AMD Features=0x20100000<NX,LM><br> AMD Features2=0x1<LAHF><br> Cores per package: 2<br>real memory = 3489136640 (3327 MB)<br>
avail memory = 3409944576 (3251 MB)<br>ACPI APIC Table: <A_M_I_ OEMAPIC ><br>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs<br> cpu0 (BSP): APIC ID: 0<br> cpu1 (AP): APIC ID: 1<br>ioapic0 <Version 2.0> irqs 0-23 on motherboard<br>
kbd1 at kbdmux0<br>ath_hal: <a href="http://0.9.20.3">0.9.20.3</a> (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)<br>hptrr: HPT RocketRAID controller driver v1.1 (Feb 22 2008 21:49:01)<br>acpi0: <NEC > on motherboard<br>
acpi0: [ITHREAD]<br>acpi0: Power Button (fixed)<br>acpi0: reservation of 0, a0000 (3) failed<br>acpi0: reservation of 100000, cff00000 (3) failed<br>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000<br>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0<br>
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0<br>Timecounter "HPET" frequency 14318180 Hz quality 900<br>cpu0: <ACPI CPU> on acpi0<br>ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] - 70, should be 6F [20070320]<br>
est0: <Enhanced SpeedStep Frequency Control> on cpu0<br>p4tcc0: <CPU Frequency Thermal Control> on cpu0<br>cpu1: <ACPI CPU> on acpi0<br>est1: <Enhanced SpeedStep Frequency Control> on cpu1<br>p4tcc1: <CPU Frequency Thermal Control> on cpu1<br>
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0<br>pci0: <ACPI PCI bus> on pcib0<br>pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0<br>pci1: <ACPI PCI bus> on pcib1<br>vgapci0: <VGA-compatible display> port 0xcc00-0xcc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1<br>
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device 26.0 on pci0<br>uhci0: [GIANT-LOCKED]<br>uhci0: [ITHREAD]<br>usb0: <UHCI (generic) USB controller> on uhci0<br>usb0: USB revision 1.0<br>
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0<br>uhub0: 2 ports with 2 removable, self powered<br>uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0<br>
uhci1: [GIANT-LOCKED]<br>uhci1: [ITHREAD]<br>usb1: <UHCI (generic) USB controller> on uhci1<br>usb1: USB revision 1.0<br>uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1<br>uhub1: 2 ports with 2 removable, self powered<br>
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0<br>uhci2: [GIANT-LOCKED]<br>uhci2: [ITHREAD]<br>usb2: <UHCI (generic) USB controller> on uhci2<br>usb2: USB revision 1.0<br>
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2<br>uhub2: 2 ports with 2 removable, self powered<br>ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbfffc00-0xfbffffff irq 18 at device 26.7 on pci0<br>
ehci0: [GIANT-LOCKED]<br>ehci0: [ITHREAD]<br>usb3: waiting for BIOS to give up control<br>usb3: EHCI version 1.0<br>usb3: companion controllers, 2 ports each: usb0 usb1 usb2<br>usb3: <EHCI (generic) USB 2.0 controller> on ehci0<br>
usb3: USB revision 2.0<br>uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3<br>uhub3: 6 ports with 6 removable, self powered<br>ugen0: <vendor 0x0c45 USB20 Camera, class 0/0, rev 2.00/1.00, addr 2> on uhub3<br>
pci0: <multimedia> at device 27.0 (no driver attached)<br>pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0<br>pci4: <ACPI PCI bus> on pcib2<br>pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0<br>
pci3: <ACPI PCI bus> on pcib3<br>atapci0: <JMicron JMB363 SATA300 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f mem 0xfeafe000-0xfeafffff irq 16 at device 0.0 on pci3<br>
atapci0: [ITHREAD]<br>atapci0: AHCI called from vendor specific driver<br>atapci0: AHCI Version 01.00 controller with 2 ports detected<br>ata2: <ATA channel 0> on atapci0<br>ata2: [ITHREAD]<br>ata3: <ATA channel 1> on atapci0<br>
ata3: [ITHREAD]<br>ata4: <ATA channel 2> on atapci0<br>ata4: [ITHREAD]<br>pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0<br>pci2: <ACPI PCI bus> on pcib4<br>pci2: <network, ethernet> at device 0.0 (no driver attached)<br>
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device 29.0 on pci0<br>uhci3: [GIANT-LOCKED]<br>uhci3: [ITHREAD]<br>usb4: <UHCI (generic) USB controller> on uhci3<br>usb4: USB revision 1.0<br>
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4<br>uhub4: 2 ports with 2 removable, self powered<br>uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0<br>
uhci4: [GIANT-LOCKED]<br>uhci4: [ITHREAD]<br>usb5: <UHCI (generic) USB controller> on uhci4<br>usb5: USB revision 1.0<br>uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5<br>uhub5: 2 ports with 2 removable, self powered<br>
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device 29.2 on pci0<br>uhci5: [GIANT-LOCKED]<br>uhci5: [ITHREAD]<br>usb6: <UHCI (generic) USB controller> on uhci5<br>usb6: USB revision 1.0<br>
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6<br>uhub6: 2 ports with 2 removable, self powered<br>ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfbfff800-0xfbfffbff irq 23 at device 29.7 on pci0<br>
ehci1: [GIANT-LOCKED]<br>ehci1: [ITHREAD]<br>usb7: EHCI version 1.0<br>usb7: companion controllers, 2 ports each: usb4 usb5 usb6<br>usb7: <EHCI (generic) USB 2.0 controller> on ehci1<br>usb7: USB revision 2.0<br>uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7<br>
uhub7: 6 ports with 6 removable, self powered<br>pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0<br>pci5: <ACPI PCI bus> on pcib5<br>rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 17 at device 1.0 on pci5<br>
miibus0: <MII bus> on rl0<br>rlphy0: <RealTek internal media interface> PHY 0 on miibus0<br>rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto<br>rl0: Ethernet address: 00:0e:2e:7f:36:fb<br>rl0: [ITHREAD]<br>
pci5: <multimedia, audio> at device 2.0 (no driver attached)<br>pci5: <serial bus, FireWire> at device 3.0 (no driver attached)<br>isab0: <PCI-ISA bridge> at device 31.0 on pci0<br>isa0: <ISA bus> on isab0<br>
atapci1: <Intel ICH9 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.2 on pci0<br>atapci1: [ITHREAD]<br>ata5: <ATA channel 0> on atapci1<br>
ata5: [ITHREAD]<br>ata6: <ATA channel 1> on atapci1<br>ata6: [ITHREAD]<br>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)<br>atapci2: <Intel ICH9 SATA300 controller> port 0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 22 at device 31.5 on pci0<br>
atapci2: [ITHREAD]<br>ata7: <ATA channel 0> on atapci2<br>ata7: [ITHREAD]<br>ata8: <ATA channel 1> on atapci2<br>ata8: [ITHREAD]<br>acpi_button0: <Power Button> on acpi0<br>sio0: configured irq 4 not in bitmap of probed irqs 0<br>
sio0: port may not be enabled<br>sio0: configured irq 4 not in bitmap of probed irqs 0<br>sio0: port may not be enabled<br>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0<br>sio0: type 16550A<br>
sio0: [FILTER]<br>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0<br>atkbd0: <AT Keyboard> irq 1 on atkbdc0<br>kbd0 at atkbd0<br>atkbd0: [GIANT-LOCKED]<br>atkbd0: [ITHREAD]<br>pmtimer0 on isa0<br>
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0<br>ata0: [ITHREAD]<br>ata1 at port 0x170-0x177,0x376 irq 15 on isa0<br>ata1: [ITHREAD]<br>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0<br>sc0: <System console> at flags 0x100 on isa0<br>
sc0: VGA <16 virtual consoles, flags=0x300><br>sio1: configured irq 3 not in bitmap of probed irqs 0<br>sio1: port may not be enabled<br>ppc0: parallel port not found.<br>Timecounters tick every 1.000 msec<br>hptrr: no controller detected.<br>
acd0: DVDR <HL-DT-STDVD-RAM GSA-H22N/1.00> at ata4-master PIO4<br>ad10: 305245MB <Seagate ST3320620AS 3.AAE> at ata5-master SATA150<br>ad14: 305245MB <Seagate ST3320620AS 3.AAE> at ata7-master SATA150<br>
SMP: AP CPU #1 Launched!<br>GEOM_LABEL: Label for provider ad10s1 is ntfs/XP.<br>GEOM_LABEL: Label for provider ad10s5 is ntfs/Yo.<br>GEOM_LABEL: Label for provider ad14s1 is ntfs/Piglet.<br>Trying to mount root from ufs:/dev/ad10s3a<br>
<br>The DVD is not using DMA because I disabled it. The firewire was not detected because I disabled that also.<br><br>This is what happens when I replug the keyboard and the mouse (they're two separate devices connected to two adjacent USB ports on the back of the PC; the mouse is wireless; the keyboard is wired).<br>
<br>ums0: <Logitech USB RECEIVER, class 0/0, rev 1.10/25.10, addr 2> on uhub1<br>ums0: 16 buttons and Z dir.<br>uhub8: <vendor 0x046d G11 Keyboard, class 9/0, rev 1.10/1.71, addr 3> on uhub1<br>uhub8: 4 ports with 2 removable, bus powered<br>
ukbd0: <vendor 0x046d Gaming Keyboard, class 0/0, rev 2.00/1.90, addr 4> on uhub8<br>kbd2 at ukbd0<br>uhid0: <vendor 0x046d Gaming Keyboard, class 0/0, rev 2.00/1.90, addr 4> on uhub8<br>uhid1: <vendor 0x046d G11 Keyboard, class 0/0, rev 2.00/1.71, addr 5> on uhub8<br>
<br>
------=_Part_24187_23082213.1204056238094--
More information about the freebsd-usb
mailing list