uhub0: device problem (SET_ADDR_FAILED), disabling port 1
Bert JW Regeer
xistence at 0x58.com
Mon Mar 26 05:03:36 UTC 2007
I am unable to use any USB devices on my 6.2-RELEASE-p3. I get the
following errors:
uhub0: device problem (SET_ADDR_FAILED), disabling port 1
uhub2: device problem (SET_ADDR_FAILED), disabling port 2
I have tried with a multitude of USB items:
Bluetooth dongle
USB da supported mass storage device
Web camera
Mouse
USB is enabled in the BIOS.
If any more information is required please let me know. I have been
unable to find any answer to this problem using Google, however it
seemed that many people had the same issue and never got it resolved.
Cheers,
Bert JW Regeer
keyhole# dmesg
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p3 #0: Mon Mar 19 16:51:04 MST 2007
xistence at keyhole.network.lan:/usr/media/Downloads/obj/usr/src/
sys/KEYHOLE
ACPI APIC Table: <KT600 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2000+ (1666.74-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 1073676288 (1023 MB)
avail memory = 1041674240 (993 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <KT600 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem
0xc0000000-0xcfffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0x9000-0x90ff mem
0xe3000000-0xe3003fff irq 21 at device 9.0 on pci0
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:17:9a:b9:5a:f5
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
skc1: <D-Link DGE-530T Gigabit Ethernet> port 0x9400-0x94ff mem
0xe3004000-0xe3007fff irq 18 at device 10.0 on pci0
skc1: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk1: <Marvell Semiconductor, Inc. Yukon> on skc1
sk1: Ethernet address: 00:17:9a:b9:5a:e1
miibus1: <MII bus> on sk1
e1000phy1: <Marvell 88E1000 Gigabit PHY> on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
ahc0: <Adaptec 2930CU SCSI adapter> port 0x9800-0x98ff mem
0xe3008000-0xe3008fff irq 20 at device 12.0 on pci0
ahc0: [GIANT-LOCKED]
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
atapci0: <VIA 6420 SATA150 controller> port
0x9c00-0x9c07,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xac00-0xac0f,
0xb000-0xb0ff irq 20 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xb400-0xb40f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at
device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 21 at
device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at
device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at
device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe3009000-0xe30090ff irq
21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc800-0xc8ff mem
0xe300a000-0xe300a0ff irq 23 at device 18.0 on pci0
miibus2: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:50:2c:a3:84:40
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd8000-0xd87ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
Timecounter "TSC" frequency 1666739742 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 78167MB <Maxtor 6Y080P0 YAR41BW0> at ata0-master UDMA133
ad1: 38166MB <WDC WD400BB-53AUA1 18.20D18> at ata0-slave UDMA100
ad2: 95611MB <Maxtor 6L100P0 BAJ41G20> at ata1-master UDMA133
ad3: 57241MB <Seagate ST360021A 7.73> at ata1-slave UDMA100
ad4: 152627MB <WDC WD1600JB-00GVA0 08.02D08> at ata2-master UDMA100
ad6: 78167MB <Maxtor 6Y080P0 YAR41BW0> at ata3-master UDMA100
Waiting 5 seconds for SCSI devices to settle
GEOM_MIRROR: Device home created (id=1379058640).
GEOM_MIRROR: Device home: provider ad1 detected.
GEOM_CONCAT: Device 160gb created (id=4221988118).
GEOM_CONCAT: Disk ad2 attached to 160gb.
GEOM_CONCAT: Disk ad3 attached to 160gb.
GEOM_CONCAT: Device 160gb activated.
GEOM_MIRROR: Device home: provider ad0s1g detected.
GEOM_MIRROR: Device home: provider ad0s1g activated.
GEOM_MIRROR: Device home: provider ad1 activated.
GEOM_MIRROR: Device home: provider mirror/home launched.
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <HP CD-Writer+ 9200 1.0e> Removable CD-ROM SCSI-4 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
bridge0: Ethernet address: fe:7c:b5:72:73:1f
Limiting closed port RST response from 223 to 200 packets/sec
Limiting closed port RST response from 211 to 200 packets/sec
Limiting closed port RST response from 221 to 200 packets/sec
vr0: link state changed to UP
sk0: link state changed to DOWN
sk0: link state changed to UP
uhub0: device problem (SET_ADDR_FAILED), disabling port 2
uhub0: device problem (SET_ADDR_FAILED), disabling port 1
uhub2: device problem (SET_ADDR_FAILED), disabling port 2
keyhole# pciconf -l
agp0 at pci0:0:0: class=0x060000 card=0x31891106 chip=0x31891106
rev=0x80 hdr=0x00
pcib1 at pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1981106
rev=0x00 hdr=0x01
skc0 at pci0:9:0: class=0x020000 card=0x4b011186 chip=0x4b011186
rev=0x11 hdr=0x00
skc1 at pci0:10:0: class=0x020000 card=0x4b011186 chip=0x4b011186
rev=0x11 hdr=0x00
ahc0 at pci0:12:0: class=0x010000 card=0x38699004 chip=0x38609004
rev=0x03 hdr=0x00
atapci0 at pci0:15:0: class=0x010400 card=0x31491106
chip=0x31491106 rev=0x80 hdr=0x00
atapci1 at pci0:15:1: class=0x01018a card=0x05711106
chip=0x05711106 rev=0x06 hdr=0x00
uhci0 at pci0:16:0: class=0x0c0300 card=0x30381106
chip=0x30381106 rev=0x81 hdr=0x00
uhci1 at pci0:16:1: class=0x0c0300 card=0x30381106
chip=0x30381106 rev=0x81 hdr=0x00
uhci2 at pci0:16:2: class=0x0c0300 card=0x30381106
chip=0x30381106 rev=0x81 hdr=0x00
uhci3 at pci0:16:3: class=0x0c0300 card=0x30381106
chip=0x30381106 rev=0x81 hdr=0x00
ehci0 at pci0:16:4: class=0x0c0320 card=0x31041106
chip=0x31041106 rev=0x86 hdr=0x00
isab0 at pci0:17:0: class=0x060100 card=0x32271106
chip=0x32271106 rev=0x00 hdr=0x00
vr0 at pci0:18:0: class=0x020000 card=0x01021106 chip=0x30651106
rev=0x78 hdr=0x00
none0 at pci1:0:0: class=0x030000 card=0x12801682 chip=0x032210de
rev=0xa1 hdr=0x00
keyhole# usbdevs -v
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA
(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA
(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA
(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), VIA
(0x0000), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), VIA
(0x0000), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 powered
port 7 powered
port 8 powered
More information about the freebsd-usb
mailing list