Can't use JMTek usbdrive
Nicolas Blais
nb_root at videotron.ca
Tue Oct 31 23:16:27 UTC 2006
When I plug my JMTek 1GB usb drive
(http://www.jmtek.com/products/usbdrivesm.html) I get the following messages
on my console:
umass0: <JMTek USBDrive2.0, class 0/0, rev 2.00/2.00, addr 2> on uhub4
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:7:0:-1: Attached to scbus7
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <JMTek USBDrive2.0 2.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready
change,
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da0:umass-sim0:0:0:0): Retries Exhausted
<SNIP X3>
and usbdevs -v:
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
VIA(0x0000), rev 1.00
<snip>
port 6 addr 2: high speed, power 200 mA, config 1, USBDrive2.0(0x2168),
JMTek(0x3606), rev 2.00
With that, there are no slices to mount. My other usb drives work fine in
FreeBSD, only this one isn't working. Any suggestions?
Nicolas.
--
FreeBSD 7.0-CURRENT #9: Tue Oct 31 15:44:23 EST 2006
nicblais at clk01a:/usr/obj/usr/src/sys/CLK01A
PGP? : http://www.clkroot.net/security/nb_root.asc
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-usb/attachments/20061031/2ca755f3/attachment.pgp
More information about the freebsd-usb
mailing list