making the linksys 200m work...

[Bernd Walter]

On Sun, Dec 17, 2006 at 04:24:21PM -0500, Dan Frohlich wrote:
> Here is what I did to try to get the linksys 200m running:
> 
> in if_axe.c:
> /* product LINKSYS2 USB200M     0x2226  USB 2.0 10/100 ethernet */
> product LINKSYS4 USB200M        0x0018  USB 2.0 10/100 ethernet rev 2.00
> /0.01
> 
> in usbdevs:
> /*      { USB_VENDOR_LINKSYS2, USB_PRODUCT_LINKSYS2_USB200M },*/
>       { USB_VENDOR_LINKSYS4, USB_PRODUCT_LINKSYS4_USB200M },
> 
> When I plug in my linksys usb dongle I see this at the console:
> axe0: vendor 0x13b1 product 0x0018, rev 2.00/0.01, addr 2
> axe0: MII without any PHY!
> device_attach: axe0 attach returned 6
> 
> The cable is plugged in, but the link LEDs are all dark. :(

Same as with the DLink: looks like completely different hardware.

-- 
B.Walter                http://www.bwct.de      http://www.fizon.de
bernd at bwct.de           info at bwct.de            support at fizon.de