usb/106615: uftdi module does not automatically load with the
FTDI FT2232C chip
Hans Petter Selasky
hselasky at c2i.net
Mon Dec 11 14:14:23 PST 2006
The following reply was made to PR usb/106615; it has been noted by GNATS.
From: Hans Petter Selasky <hselasky at c2i.net>
To: Leif Pedersen <bilbo at hobbiton.org>
Cc: FreeBSD-gnats-submit at freebsd.org
Subject: Re: usb/106615: uftdi module does not automatically load with the FTDI FT2232C chip
Date: Mon, 11 Dec 2006 22:29:47 +0100
On Monday 11 December 2006 21:11, Leif Pedersen wrote:
> >Number: 106615
> >Category: usb
> >Synopsis: uftdi module does not automatically load with the FTDI
> > FT2232C chip Confidential: no
> >Severity: serious
> >Priority: high
> >Responsible: freebsd-usb
> >State: open
> >Quarter:
> >Keywords:
> >Date-Required:
> >Class: sw-bug
> >Submitter-Id: current-users
> >Arrival-Date: Mon Dec 11 20:40:05 GMT 2006
> >Closed-Date:
> >Last-Modified:
> >Originator: Leif Pedersen
> >Release: FreeBSD 6.1-PRERELEASE i386
> >Organization:
> >Environment:
> >
> >
> >
> >Description:
>
> uftdi module does not automatically load with the FTDI FT2232C chip
>
> >How-To-Repeat:
>
> Boot with generic kernel, plug in a USB serial port that uses the FT2232C
> chip such as the USB-16COM-RM.
>
> >Fix:
>
> I don't know how to fix this.
>
> To work around, add this to /boot/loader.conf: uftdi_load="YES"
>
> Or run kldload uftdi, then replug the device. (Loading the module without
> replugging the device does NOT work. Should it?)
The new USB driver will have this fixed, so that immediately when you load a
kernel module, USB devices will get probed.
See:
http://perforce.freebsd.org/depotTreeBrowser.cgi?FSPC=//depot/projects/usb&HIDEDEL=NO
Or:
http://www.turbocat.net/~hselasky/usb4bsd
> PS. I have one of these, and I'd be happy to test any changes.
It would be nice if you could test the rewritten uftdi driver, if it works.
--HPS
>
> >Release-Note:
> >Audit-Trail:
> >Unformatted:
More information about the freebsd-usb
mailing list