usb/83022: ALI USB 2.0 EHCI Controller is not detected

[Markus Rosellen]

>Number:         83022
>Category:       usb
>Synopsis:       ALI USB 2.0 EHCI Controller is not detected
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-usb
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          change-request
>Submitter-Id:   current-users
>Arrival-Date:   Tue Jul 05 18:50:16 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Markus Rosellen
>Release:        FreeBSD 5.3 Stable
>Organization:
>Environment:
FreeBSD rechner4.local 5.3-RELEASE FreeBSD 5.3-RELEASE #0: Sat Jul  2 14:01:00 CEST 2005     root at rechner4.local:/usr/src/sys/i386/compile/GENERIC686  i386
>Description:
I think that only ALI USB 2.0 Controller chip is missing in the EHCI-Table, because it's to new.
Consider the last lines of my data:

dmesg:
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xdb000000-0xdb000fff irq 15 at device 10.0 on pci0
ohci0: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb1: USB revision 1.0
uhub1: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xda800000-0xda800fff irq 11 at device 10.1 on pci0
ohci1: [GIANT-LOCKED]
usb2: OHCI version 1.0, legacy support
usb2: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci1
usb2: USB revision 1.0
uhub2: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ohci2: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xda000000-0xda000fff irq 10 at device 10.2 on pci0
ohci2: [GIANT-LOCKED]
usb3: OHCI version 1.0, legacy support
usb3: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 10.3 (no driver attached)



scanpci -vv
00:0a.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
        Subsystem: ALi Corporation USB 1.1 Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin B routed to IRQ 15
        Region 0: Memory at db000000 (32-bit, non-prefetchable)
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
        Subsystem: ALi Corporation USB 1.1 Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin C routed to IRQ 11
        Region 0: Memory at da800000 (32-bit, non-prefetchable)
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI])
        Subsystem: ALi Corporation USB 1.1 Controller
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin D routed to IRQ 10
        Region 0: Memory at da000000 (32-bit, non-prefetchable)
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) (prog-if 20 [EHCI])
        Subsystem: ALi Corporation USB 2.0 Controller
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (20000ns max), cache line size 08
        Interrupt: pin A routed to IRQ 12
        Region 0: Memory at d9800000 (32-bit, non-prefetchable)
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] #0a [2090]

>How-To-Repeat:
Boot the FreeBSD-Box
>Fix:
probably only uptade the driver-table with my PCI-data.

Thank You!
>Release-Note:
>Audit-Trail:
>Unformatted: