In TCP recovery state, problem of computing the pipe(amount of data in flight).
yongmincho82 at gmail.com
Thu Mar 3 01:15:03 UTC 2016
Thanks for the reply.
I will try to create a patch based on this.
On Mon, Feb 29, 2016 at 09:54:53AM -0800, hiren panchasara wrote:
> On 02/29/16 at 05:40P, Yongmin Cho wrote:
> > Thanks very much for the quick reply.
> > I'm sorry, I didn't make patch file.
> > First, I wanted to discuss my opinion is right.
> > Let me give you example, please check this.
> > <- ACK (cumack = 1, sack[3-4], sack[6-7], sack[9-10])
> > * here segment/byte 2, 5, and 8 are missing.
> > <- ACK (cumack = 1, sack[12-13], sack[15-16], sack[18-19])
> > * here segment/bytes 11, 14 and 17 are also reported missing.
> > <- ACK (cumack = 1, sack[18-19], sack[21-24], sack[27, 28])
> > * here segment/bytes 20 and 25, 26 are missing. (triggered fast
> > retransmission)
> > <- ACK.....(cumack = 1, sack[21-24], sack[27, 28], sack[32, 33])
> > <- ACK.....(cumack = 1, sack[34-35], sack[37, 40], sack[42, 44])
> > <- ACK.....(cumack = 1, sack[34-35], sack[37, 40], sack[42, 45])
> > <- ACKs.....(many duplication acks, and new sacked blocks)
> > In the fast recovery phase, the pipe is caculated like below, If the
> > net.inet.tcp.rfc6675_pipe is turned on.
> > pipe = snd_max - snd_una + sack_bytes_rexmit(1 MSS size) -
> > sacked_bytes(10 = 34-35, 37-40, 42-45 tcp_sack.c:390)
> > One segment is sended(sack_bytes_rexmit), when triggered fast
> > retransmission.
> > Because the snd_cwnd was set 1 mss size. (tcp_input.c:2609)
> > In the fast recovery phase, The sender can send data,
> > If this condition is right(awnd < tp->snd_ssthresh tcp_input.c:2568).
> > When in the network, It still has many in flight packets,
> > snd_max and snd_una will not be changed, and sack_bytes_rexmit is one MSS
> > size, and sacked_bytes is caculated by last ACK that has three SACK
> > blocks(34-35, 37-40, 42-45).
> > So, sometimes(In my test environment) the awnd(pipe) value can't go
> > down less than the snd_ssthresh, while receiving each ACKs
> > in fast recovery phase.
> > You know, If the awnd value can't go down less than the snd_ssthresh,
> > The sender can't send data that is included snd_holes.
> > So, I think, the sacked_bytes should be caculated by all of sacked
> > blocks that is greater than snd_una, like below.
> > pipe = snd_max - snd_una + sack_bytes_rexmit - sacked_bytes(3-4, 6-7,
> > 9-10, 12-13, 15-16, 18-19, 21-24, 27-28, ...).
> > But on current implementation, the sacked_bytes is caculated by three(or four)
> > sacked blocks that is in last ACK, like below.
> > pipe = snd_max - snd_una + sack_bytes_rexmit - sacked_bytes(34-35,
> > 37-40, 42-45 -> sacked blocks of last ACK).
> > My opinion may not be right. Just I want to check implementation of
> > computing pipe.
> Your opinion seems correct to me. If you can create a patch based on
> this, that'd be great. As I cannot spend time on this until next week.
More information about the freebsd-transport