[Bug 210557] sys/geom broken kyua status for 11.0 -r302180 (only tested on rpi2 with -mcpu=cortex-a7 in use)

[bugzilla-noreply at freebsd.org]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=210557

--- Comment #4 from Mark Millard <markmi at dsl-only.net> ---
(In reply to Ngie Cooper from comment #2)

For the USB SSD that I normally use as the root file system on the rpi2 here is
what benchmarks/bonnie reports:

              -------Sequential Output-------- ---Sequential Input-- --Random--
              -Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks---
Machine    MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU  /sec %CPU
         4096 12024 99.8 23417 23.4  8551 10.9 12825 100.0 16128 11.9 522.9 
7.9

which is for "/dev/ufs/RPI2rootfs on /" below:

# mount
/dev/ufs/RPI2rootfs on / (ufs, NFS exported, local, noatime, soft-updates)
devfs on /dev (devfs, local)
/dev/mmcsd0s1 on /boot/msdos (msdosfs, local, noatime)
/dev/ufs/RPI2Arootfs on /mnt (ufs, local, noatime, soft-updates)

# df -m
Filesystem           1M-blocks  Used  Avail Capacity  Mounted on
/dev/ufs/RPI2rootfs     440365 40251 364885    10%    /
devfs                        0     0      0   100%    /dev
/dev/mmcsd0s1               49     7     42    15%    /boot/msdos
/dev/ufs/RPI2Arootfs     26763 13215  11406    54%    /mnt

I will report what bonnie reports about the SD card after it finishes
("/dev/ufs/RPI2Arootfs on /mnt").

-- 
You are receiving this mail because:
You are on the CC list for the bug.