standards/183652: make installkernel failure with installer provided ZFS configuration.
Nikolas Britton
nikolas.britton at gmail.com
Mon Nov 4 10:10:01 UTC 2013
>Number: 183652
>Category: standards
>Synopsis: make installkernel failure with installer provided ZFS configuration.
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-standards
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Nov 04 10:10:00 UTC 2013
>Closed-Date:
>Last-Modified:
>Originator: Nikolas Britton
>Release: FreeBSD 10 Beta2
>Organization:
>Environment:
Not available, it was a stock FreeBSD 10 Beta 2 x86_64 machine.
>Description:
I was trying to rebuild world on a FreeBSD 10 test system, that I had just installed. ZFS root was setup. I let the installation program do all the ZFS setup and configuration. I put root on a 5 disk encrypted raidz array. Besides the installer configuring 5 times the amount of swap space I asked for (asked for 8gb, installer put 8gb on each drive, for 40gb in total.) everything was working great until I reached "make installkernel". I followed section 23.7 (rebuilding "world") explicitly. I have not altered the test system in any way from the installer provided settings. I'm reporting this as a bug, but would would also like some advice on how to fix it.
Literally all that has been done post installation is:
a) install pkgng.
b) install svn using pkgng.
c) sync repositories with svn.
d) make buildworld.
e) make buildkernel.
Thanks!
root at els1:/usr/src # make installkernel
--------------------------------------------------------------
>How-To-Repeat:
Installed FreeBSD using installer provided defaults. Root ZFS, 5 disk raidz with encryption (all defaults: i.e. AES-XTS). Requested these options from the installer configuration screen. Post installation, all that was does was literally:
a) install pkgng.
b) install svn using pkgng.
c) sync repositories with svn.
d) make buildworld.
e) make buildkernel.
>Fix:
It appears the installer did not properly configure /boot.
root at els1:/usr/src # ll /boot
lrwxr-xr-x 1 root wheel 13 Oct 26 14:33 /boot@ -> bootpool/boot
root at els1:/usr/src # make installkernel
--------------------------------------------------------------
>Release-Note:
>Audit-Trail:
>Unformatted:
>>> Installing kernel GENERIC
--------------------------------------------------------------
cd /usr/obj/usr/src/sys/GENERIC; MAKEOBJDIRPREFIX=/usr/obj MACHINE_ARCH=amd64 MACHINE=amd64 CPUTYPE= GROFF_BIN_PATH=/usr/obj/usr/src/tmp/legacy/usr/bin GROFF_FONT_PATH=/usr/obj/usr/src/tmp/legacy/usr/share/groff_font GROFF_TMAC_PATH=/usr/obj/usr/sr c/tmp/legacy/usr/share/tmac PATH=/usr/obj/usr/src/tmp/legacy/usr/sbin:/usr/obj/usr/src/tmp/legacy/usr/bin:/usr/obj/usr/src/tmp/legacy/usr/games:/usr/obj/usr/src/tmp/legacy/bin:/usr/obj/usr/src/tmp/usr/sbin:/usr/obj/usr/src/tmp/usr/bin:/usr/obj/usr/src/tm p/usr/games:/sbin:/bin:/usr/sbin:/usr/bin make KERNEL=kernel install
mkdir -p /boot/kernel
mkdir: /boot: No such file or directory
*** Error code 1
Stop.
make[2]: stopped in /usr/obj/usr/src/sys/GENERIC
*** Error code 1
Stop.
make[1]: stopped in /usr/src
*** Error code 1
Stop.
make: stopped in /usr/src
root at els1:/usr/src # ll /boot
lrwxr-xr-x 1 root wheel 13 Oct 26 14:33 /boot@ -> bootpool/boot
root at els1:/usr/src # mount
zroot/bootenv/default on / (zfs, local, noatime, nfsv4acls)
devfs on /dev (devfs, local, multilabel)
zroot/tmp on /tmp (zfs, local, noatime, nosuid, nfsv4acls)
zroot/usr/home on /usr/home (zfs, local, noatime, nosuid, nfsv4acls)
zroot/usr/local on /usr/local (zfs, local, noatime, nfsv4acls)
zroot/usr/obj on /usr/obj (zfs, local, noatime, nfsv4acls)
zroot/usr/ports on /usr/ports (zfs, local, noatime, nosuid, nfsv4acls)
zroot/usr/ports/distfiles on /usr/ports/distfiles (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/usr/ports/packages on /usr/ports/packages (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/usr/src on /usr/src (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var on /var (zfs, local, noatime, nfsv4acls)
zroot/var/crash on /var/crash (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/db on /var/db (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/db/pkg on /var/db/pkg (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/empty on /var/empty (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/log on /var/log (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/mail on /var/mail (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/run on /var/run (zfs, local, noatime, noexec, nosuid, nfsv4acls)
zroot/var/tmp on /var/tmp (zfs, local, noatime, nosuid, nfsv4acls)
root at els1:/usr/src # cat /etc/fstab
# Device Mountpoint FStype Options Dump Pass#
/dev/gpt/swap0 none swap sw 0 0
/dev/gpt/swap1 none swap sw 0 0
/dev/gpt/swap2 none swap sw 0 0
/dev/gpt/swap3 none swap sw 0 0
/dev/gpt/swap4 none swap sw 0 0
root at els1:/usr/src # ll /dev/ada*
crw-r----- 1 root operator 0x5f Nov 3 10:01 /dev/ada0
crw-r----- 1 root operator 0x64 Nov 3 10:01 /dev/ada0p1
crw-r----- 1 root operator 0x66 Nov 3 10:01 /dev/ada0p2
crw-r----- 1 root operator 0x74 Nov 3 10:01 /dev/ada0p3
crw-r----- 1 root operator 0x8f Nov 3 10:01 /dev/ada0p3.eli
crw-r----- 1 root operator 0x76 Nov 3 10:01 /dev/ada0p4
crw-r----- 1 root operator 0x61 Nov 3 10:01 /dev/ada1
crw-r----- 1 root operator 0x79 Nov 3 10:01 /dev/ada1p1
crw-r----- 1 root operator 0x7b Nov 3 10:01 /dev/ada1p2
crw-r----- 1 root operator 0x7d Nov 3 10:01 /dev/ada1p3
crw-r----- 1 root operator 0x9b Nov 3 10:01 /dev/ada1p3.eli
crw-r----- 1 root operator 0x7f Nov 3 10:01 /dev/ada1p4
crw-r----- 1 root operator 0x81 Nov 3 10:01 /dev/ada2
crw-r----- 1 root operator 0xa0 Nov 3 10:01 /dev/ada2p1
crw-r----- 1 root operator 0xa2 Nov 3 10:01 /dev/ada2p2
crw-r----- 1 root operator 0xa4 Nov 3 10:01 /dev/ada2p3
crw-r----- 1 root operator 0xc2 Nov 3 10:01 /dev/ada2p3.eli
crw-r----- 1 root operator 0xa6 Nov 3 10:01 /dev/ada2p4
crw-r----- 1 root operator 0x83 Nov 3 10:01 /dev/ada3
crw-r----- 1 root operator 0xa9 Nov 3 10:01 /dev/ada3p1
crw-r----- 1 root operator 0xab Nov 3 10:01 /dev/ada3p2
crw-r----- 1 root operator 0xad Nov 3 10:01 /dev/ada3p3
crw-r----- 1 root operator 0xce Nov 3 10:01 /dev/ada3p3.eli
crw-r----- 1 root operator 0xaf Nov 3 10:01 /dev/ada3p4
crw-r----- 1 root operator 0x85 Nov 3 10:01 /dev/ada4
crw-r----- 1 root operator 0xb2 Nov 3 10:01 /dev/ada4p1
crw-r----- 1 root operator 0xb4 Nov 3 10:01 /dev/ada4p2
crw-r----- 1 root operator 0xb6 Nov 3 10:01 /dev/ada4p3
crw-r----- 1 root operator 0xda Nov 3 10:01 /dev/ada4p3.eli
crw-r----- 1 root operator 0xb8 Nov 3 10:01 /dev/ada4p4
root at els1:/usr/src # zpool status
pool: zroot
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
zroot ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
ada0p3.eli ONLINE 0 0 0
ada1p3.eli ONLINE 0 0 0
ada2p3.eli ONLINE 0 0 0
ada3p3.eli ONLINE 0 0 0
ada4p3.eli ONLINE 0 0 0
errors: No known data errors
root at els1:/usr/src # fdisk /dev/ada0
******* Working on device /dev/ada0 *******
parameters extracted from in-core disklabel are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 238 (0xee),(EFI GPT)
start 1, size 586114703 (286188 Meg), flag 0
beg: cyl 0/ head 0/ sector 2;
end: cyl 1023/ head 255/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
root at els1:/usr/src # fdisk /dev/ada1
******* Working on device /dev/ada1 *******
parameters extracted from in-core disklabel are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 238 (0xee),(EFI GPT)
start 1, size 586114703 (286188 Meg), flag 0
beg: cyl 0/ head 0/ sector 2;
end: cyl 1023/ head 255/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
root at els1:/usr/src # fdisk /dev/ada2
******* Working on device /dev/ada2 *******
parameters extracted from in-core disklabel are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 238 (0xee),(EFI GPT)
start 1, size 586114703 (286188 Meg), flag 0
beg: cyl 0/ head 0/ sector 2;
end: cyl 1023/ head 255/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
root at els1:/usr/src # fdisk /dev/ada3
******* Working on device /dev/ada3 *******
parameters extracted from in-core disklabel are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 238 (0xee),(EFI GPT)
start 1, size 586114703 (286188 Meg), flag 0
beg: cyl 0/ head 0/ sector 2;
end: cyl 1023/ head 255/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
root at els1:/usr/src # fdisk /dev/ada4
******* Working on device /dev/ada4 *******
parameters extracted from in-core disklabel are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=581463 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 238 (0xee),(EFI GPT)
start 1, size 586114703 (286188 Meg), flag 0
beg: cyl 0/ head 0/ sector 2;
end: cyl 1023/ head 255/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
root at els1:/usr/src # dmesg
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-BETA2 #0 r257166: Sat Oct 26 19:23:22 UTC 2013
root at snap.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
CPU: Intel(R) Xeon(R) CPU L5420 @ 2.50GHz (2500.14-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 0x6 Model = 0x17 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8269221888 (7886 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
random: <Software, Yarrow> initialized
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 48 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 50 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 56 at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 56 at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 56 at device 0.0 on pci6
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 71 at device 2.0 on pci6
pci8: <ACPI PCI bus> on pcib8
em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2000-0x201f mem 0xde820000-0xde83ffff,0xde800000-0xde81ffff irq 71 at device 0.0 on pci8
em0: Using an MSI interrupt
em0: Ethernet address: 00:25:90:18:d1:50
em1: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0x2020-0x203f mem 0xde860000-0xde87ffff,0xde840000-0xde85ffff irq 70 at device 0.1 on pci8
em1: Using an MSI interrupt
em1: Ethernet address: 00:25:90:18:d1:51
pcib9: <ACPI PCI-PCI bridge> at device 0.3 on pci5
pci9: <ACPI PCI bus> on pcib9
mvs0: <Marvell 88SX6081 SATA controller> port 0x3000-0x30ff mem 0xde200000-0xde2fffff,0xde400000-0xde7fffff irq 24 at device 1.0 on pci9
mvs0: Gen-II, 8 3Gbps ports, Port Multiplier supported
mvsch0: <Marvell SATA channel> at channel 0 on mvs0
mvsch1: <Marvell SATA channel> at channel 1 on mvs0
mvsch2: <Marvell SATA channel> at channel 2 on mvs0
mvsch3: <Marvell SATA channel> at channel 3 on mvs0
mvsch4: <Marvell SATA channel> at channel 4 on mvs0
mvsch5: <Marvell SATA channel> at channel 5 on mvs0
mvsch6: <Marvell SATA channel> at channel 6 on mvs0
mvsch7: <Marvell SATA channel> at channel 7 on mvs0
pci0: <base peripheral> at device 15.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci10: <ACPI PCI bus> on pcib10
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1800-0x181f irq 20 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1820-0x183f irq 21 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1840-0x185f irq 22 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x1860-0x187f irq 23 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xdeb04000-0xdeb043ff irq 23 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0x4000-0x407f mem 0xdc000000-0xddffffff,0xdea00000-0xdea3ffff at device 1.0 on pci11
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ESB2 AHCI SATA controller> port 0x18b0-0x18b7,0x18a4-0x18a7,0x18a8-0x18af,0x18a0-0x18a3,0x1880-0x189f mem 0xdeb04400-0xdeb047ff irq 17 at device 31.2 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
p4tcc5: <CPU Frequency Thermal Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <Intel> at usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel> at usbus1
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen4.1: <Intel> at usbus4
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <Intel> at usbus3
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ada0 at ahcich0 bus 0 scbus8 target 0 lun 0
ada0: <Maxtor 7V300F0 VA111630> ATA-7 SATA 2.x device
ada0: Serial Number V601GADG
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad20
ada1 at ahcich1 bus 0 scbus9 target 0 lun 0
ada1: <Maxtor 7V300F0 VA111630> ATA-7 SATA 2.x device
ada1: Serial Number V601G9DG
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad22
ada2 at ahcich2 bus 0 scbus10 target 0 lun 0
ada2: <Maxtor 7V300F0 VA111630> ATA-7 SATA 2.x device
ada2: Serial Number V601LJ1G
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad24
ada3 at ahcich3 bus 0 scbus11 target 0 lun 0
ada3: <Maxtor 7V300F0 VA111630> ATA-7 SATA 2.x device
ada3: Serial Number V608FLHG
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad26
ada4 at ahcich4 bus 0 scbus12 target 0 lun 0
ada4: <Maxtor 7V300F0 VA111630> ATA-7 SATA 2.x device
ada4: Serial Number V608FTFG
ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
ada4: Previously was known as ad28
Enter passphrase for ada0p3: Netvsc initializing... SMP: AP CPU #4 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #7 Launched!
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.2: <Logitech> at usbus0
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 2> on usbus0
kbd2 at ukbd0
ugen2.2: <Logitech> at usbus2
ukbd1: <Logitech Logitech USB Keyboard, class 0/0, rev 1.10/28.00, addr 2> on usbus2
kbd3 at ukbd1
GEOM_ELI: Wrong key for ada0p3. Tries left: 2.
Enter passphrase for ada0p3: GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Enter passphrase for ada1p3: GEOM_ELI: Device ada1p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Enter passphrase for ada2p3: GEOM_ELI: Device ada2p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Enter passphrase for ada3p3: GEOM_ELI: Wrong key for ada3p3. Tries left: 2.
Enter passphrase for ada3p3: GEOM_ELI: Wrong key for ada3p3. Tries left: 1.
Enter passphrase for ada3p3: GEOM_ELI: Device ada3p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Enter passphrase for ada4p3: GEOM_ELI: Device ada4p3.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
Trying to mount root from zfs:zroot/bootenv/default []...
root at els1:/usr/src #
>>> Installing kernel GENERIC
--------------------------------------------------------------
cd /usr/obj/usr/src/sys/GENERIC; MAKEOBJDIRPREFIX=/usr/obj MACHINE_ARCH=amd64 MACHINE=amd64 CPUTYPE= GROFF_BIN_PATH=/usr/obj/usr/src/tmp/legacy/usr/bin GROFF_FONT_PATH=/usr/obj/usr/src/tmp/legacy/usr/share/groff_font GROFF_TMAC_PATH=/usr/obj/usr/sr c/tmp/legacy/usr/share/tmac PATH=/usr/obj/usr/src/tmp/legacy/usr/sbin:/usr/obj/usr/src/tmp/legacy/usr/bin:/usr/obj/usr/src/tmp/legacy/usr/games:/usr/obj/usr/src/tmp/legacy/bin:/usr/obj/usr/src/tmp/usr/sbin:/usr/obj/usr/src/tmp/usr/bin:/usr/obj/usr/src/tm p/usr/games:/sbin:/bin:/usr/sbin:/usr/bin make KERNEL=kernel install
mkdir -p /boot/kernel
mkdir: /boot: No such file or directory
*** Error code 1
More information about the freebsd-standards
mailing list