uchcom update

[KOT MATPOCKuH]

Hello!

I'm using FreeBSD 12.2-STABLE r368656 and got usb-to-rs232 with this
controller.
I see /dev/cuaU0 after plugging in adapter, I can attach to serial line
using cu, but after sending any symbol to device I have device reconnection:
uchcom0 on uhub0
uchcom0: <vendor 0x1a86 USB2.0-Ser, rev 1.10/2.54, addr 17> on usbus0
uchcom0: CH340 detected
uchcom0: at uhub0, port 9, addr 17 (disconnected)
uchcom0: detached
uchcom0 on uhub0
uchcom0: <vendor 0x1a86 USB2.0-Ser, rev 1.10/2.54, addr 17> on usbus0
uchcom0: CH340 detected

вт, 5 июн. 2018 г. в 15:05, Ian FREISLICH <ian.freislich at capeaugusta.com>:

> On 05/22/2018 09:44 AM, Andriy Gapon wrote:
> > Yesterday I committed some changes to uchcom (so far, only in CURRENT).
> > Commits are r333997 - r334002.
> >
> > If you have a CH340/341 based USB<->RS232 adapter and it works for you,
> could
> > you please test that it still does?
> > If you tried your adapter in the past and it did not work, there is a
> chance it
> > might start working now.  Could you please test that as well?
>
> ugen5.4: <vendor 0x1a86 USB2.0-Serial> at usbus5, cfg=0 md=HOST spd=FULL
> (12Mbps) pwr=ON (96mA)
> ugen5.4.0: uchcom0: <vendor 0x1a86 USB2.0-Serial, rev 1.10/2.54, addr 3>
>
> It's not made it any worse.  I'm not using this adapter by choice - it's
> a USB to Maxim (Dallas) one-wire bus adapter.  The manual used to state
> that these are possibly the worst chips ever.  Is that still the
> prevailing opinion?
>
> Ian
>
> --
>
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
>


-- 
MATPOCKuH