Running FreeBSD on M.2 SSD

[Pete Wright]

On 2020-02-24 11:13, Mario Olofo wrote:
> Hi Pete,
>
> The nvmecontrol devlist don't found any devices.
> pciconf -lv nvme0 didn't found anything either.
>
> The camcontrol devlist output was as follows:
>
> root@~ # camcontrol devlist
> <ST10000LX015-1U7172 SDM3>         at scbus0 target 0 lun 0 (ada0,pass0)
> <WDC WDS480G2G0B-00EPW0 UK450000>  at scbus1 target 0 lun 0 (ada1,pass1)
> <SanDisk Extreme 0001>             at scbus2 target 0 lun 0 (pass2,da0)
>
> The dmesg | grep ada1 shows the following:
>
> Feb 24 18:54:31  kernel: ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
> Feb 24 18:54:31  kernel: ada1: <WDC WDS480G2G0B-00EPW0 UK450000> ACS-2 ATA
> SATA 3.x device
> Feb 24 18:54:31  kernel: ada1: Serial Number 183541800480
> Feb 24 18:54:31  kernel: ada1: 600.00MB/s transfers (SATA 3.x, UDMA6, PIO
> 512bytes)
> Feb 24 18:54:31  kernel: ada1: Command Queueing enabled
> Feb 24 18:54:31  kernel: ada1:457872MB (937721856 512 byte sectors)
>
> Mario
>
Thanks Mario,
When you run into issues or filesystem corruption do you see anything in 
the dmesg buffer or in /var/log/messages?

-pete

-- 
Pete Wright
pete at nomadlogic.org
@nomadlogicLA