boot 11.3-BETA1 hangs om armv5

Mori Hiroki yamori813 at yahoo.co.jp
Mon Jun 3 11:54:18 UTC 2019


Hi.

I build and flash on arm/ralink today by CURRENT.

arm/ralink is hangup at same point too.

Hiroki Mori


----- Original Message -----
> From: Ronald Klop <ronald-lists at klop.ws>
> To: freebsd-arm at freebsd.org; "freebsd-stable at freebsd.org" <freebsd-stable at freebsd.org>
> Cc: 
> Date: 2019/5/28, Tue 05:00
> Subject: boot 11.3-BETA1 hangs om armv5
> 
> Was running "FreeBSD 11.2-RELEASE-p4 (SHEEVAPLUG) #4 r339336M: Sat Oct 13  
> 23:31:51 CEST 2018".
> Compiled 11.3-BETA1, installed kernel.bin in /boot/msdos and started it.  
> Output below. It hangs. I guess in starting the random/entropy stuff.
> 
> Any thoughts or advise?
> Don't spend to much time on it, I'm happy to phase it out.
> 
> Regards,
> Ronald.
> 
> 
> Rebooting...
> 
>           __  __                      _ _
>          |  \/  | __ _ _ ____   _____| | |
>          | |\/| |/ _` | '__\ \ / / _ \ | |
>          | |  | | (_| | |   \ V /  __/ | |
>          |_|  |_|\__,_|_|    \_/ \___|_|_|
>   _   _     ____              _
> | | | |   | __ )  ___   ___ | |_
> | | | |___|  _ \ / _ \ / _ \| __|
> | |_| |___| |_) | (_) | (_) | |_
>   \___/    |____/ \___/ \___/ \__|
>   ** MARVELL BOARD: SHEEVA PLUG LE
> 
> U-Boot 1.1.4 (Mar 19 2009 - 16:06:59) Marvell version: 3.4.16
> 
> U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006CEE80
> 
> Soc: 88F6281 A0 (DDR2)
> CPU running @ 1200Mhz L2 running @ 400Mhz
> SysClock = 400Mhz , TClock = 200Mhz
> 
> DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
> DRAM CS[0] base 0x00000000   size 256MB
> DRAM CS[1] base 0x10000000   size 256MB
> DRAM Total size 512MB  16bit width
> Flash:  0 kB
> Addresses 8M - 0M are saved for the U-Boot usage.
> Mem malloc Initialization (8M - 7M): Done
> NAND:512 MB
> 
> CPU : Marvell Feroceon (Rev 1)
> 
> Streaming disabled
> Write allocate disabled
> 
> 
> USB 0: host mode
> PEX 0: interface detected no Link.
> Net:   egiga0 [PRIME], egiga1
> Hit any key to stop autoboot:  0
> (Re)start USB...
> USB:   scanning bus for devices... 4 USB Device(s) found
>         scanning bus for storage devices... 1 Storage Device(s) found
> reading kernel.bin
> .
> ........................................................................................................................................................................................................................................................................................................................................................................................................................................
> 
> 4345316 bytes read
> ## Starting application at 0x00900000 ...
> Copyright (c) 1992-2019 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>     The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 11.3-BETA1 #0 r348277M: Sun May 26 14:17:08 CEST 2019
>     builder at rpi3:/data/src/obj-11.3/arm.arm/data/src/11.3/sys/SHEEVAPLUG  
> arm
> FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM  
> 8.0.0)
> CPU: Feroceon 88FR131 rev 1 (**unknown 4** core)
>    Little-endian DC enabled IC disabled WA disabled DC streaming enabled
>    BTB disabled L2 enabled L2 prefetch enabled
>    WB enabled LABT branch prediction disabled
>    16KB/32B 4-way instruction cache
>    16KB/32B 4-way write-back-locking-C data cache
> real memory  = 536866816 (511 MB)
> avail memory = 518778880 (494 MB)
> SOC: Marvell 88F6281 rev A0, TClock 200MHz
>    Instruction cache prefetch enabled, data cache prefetch enabled
>    256KB 4-way set-associative write-through unified L2 cache
> random: entropy device external interface
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm 
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
> 



More information about the freebsd-stable mailing list