efi and serial console
mike tancsa
mike at sentex.net
Fri Jul 19 19:58:59 UTC 2019
I installed a RELENG12 snapshot from July 11th and having a hard time
getting serial console to work. In the past, I would have something
simple like
ttyu0 "/usr/libexec/getty std.115200 vt100 on secure
in /etc/ttys
and in /boot/loader.conf
console="comconsole,vidconsole"
comconsole_speed="115200" # Set the current serial console speed
With some googling, I did find I now have to use in /boot/loader.conf
boot_multicons="YES"
boot_serial="YES"
console="comconsole,efi"
comconsole_speed="115200"
However, I can never get getty to automatically start up. I have
# grep u0 /etc/ttys
ttyu0 "/usr/libexec/getty std.115200 vt100 on secure
#
but at boot up time, I can see on my serial connection the boot loader
etc and everything prints out to
Configuring vt: blanktime.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
igb0: link state changed to UP
Starting sendmail_msp_queue.
Starting cron.
Starting backgrou
and then nothing. No login prompt and I dont see getty running on the
serial port. If I ssh in and then do a
/usr/libexec/getty std.115200 ttyu0
up pops the login prompt and I can login over serial. However, I have to
login as a non root user first. Any idea what I am missing ?
---Mike
More information about the freebsd-stable
mailing list