Console is broken after updating to 11.2-RELEASE

[Warner Losh]

UEFI or legacy boot? Is a BMC involved?

Warner

On Fri, Jun 22, 2018, 2:09 AM Yasuhiro KIMURA <yasu at utahime.org> wrote:

> Hello.
>
> With the commit of r335510 releng/11.2 switched to -RELEASE. So I
> updated one of my home server from 11.1-RELEASE-p11 to 11.2-RELEASE.
>
> But when I rebooted I found OS boot messages are not displayed on
> console while OS itself has booted successfully. To be exact,
>
> 1. BIOS message are displayed.
> 2. Boot menu of FreeBSD is displayed.
> 3. Kernel boot starts but after 'Booting...' no following messages
>    are displayed.
> 4. After OS has booted console stays unusable.
>
> Kernel configuration is as follwing.
>
> ----------------------------------------------------------------------
> yasu at maybe[2006]% uname -a
>                                                  ~
> FreeBSD maybe.home.utahime.org 11.2-RELEASE FreeBSD 11.2-RELEASE #0
> r335513: Fri Jun 22 16:12:12 JST 2018     rootz at maybe.home.utahime.org:/usr0/freebsd/base/obj/usr0/freebsd/base/releng/11.2/sys/MAYBE
> amd64
> yasu at maybe[2007]% cat /usr/src/sys/amd64/conf/MAYBE
>                                                   ~
> #
> # MAYBE -- Local kernel configuration file of maybe for FreeBSD/amd64
> #
> # For more information on this file, please read the config(5) manual page,
> # and/or the handbook section on Kernel Configuration Files:
> #
> #
> http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
> #
> # The handbook is also available locally in /usr/share/doc/handbook
> # if you've installed the doc distribution, otherwise always see the
> # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
> # latest information.
> #
> # An exhaustive list of options and more detailed explanations of the
> # device lines is also present in the ../../conf/NOTES and NOTES files.
> # If you are in doubt as to the purpose or necessity of a line, check first
> # in NOTES.
> #
> # $FreeBSD$
>
> include GENERIC
>
> ident   MAYBE
>
> # ZFS support
> options ZFS
>
> # PF support
> device  pf              #PF OpenBSD packet-filter firewall
> device  pflog           #logging support interface for PF
>
> #
> # Temperature sensors:
> #
> # coretemp: on-die sensor on Intel Core and newer CPUs
> #
> device  coretemp
> yasu at maybe[2008]%
> ----------------------------------------------------------------------
>
> I tried GENERIC kernel but the problem still happened.
>
> HWs are,
>
> M/B:     ASUS N3150I-C
>          (https://www.asus.com/us/Motherboards/N3150IC/)
> Display: EIZO FlexScan L565
>          (http://www.eizoglobal.com/support/db/products/model/L565)
>
> M/B and display are connected with analog VGA.
>
> Does anyone experiences same problem? Are there any solution or
> workaound?
>
> Best Regards.
>
> ---
> Yasuhiro KIMURA
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>