FreeBSD 11.0, bxe and lagg

[Ingeborg Hellemo]

I'm in the process of upgrading my 10.3 servers to 11.0. I have stumbled upon 
problems with lagg on two boxes.

They both have QLogic NetXtreme II BCM57800 10GbE network card using the bxe 
driver.

My lagg configuration is unchanged in the process but after upgradring to 11.0 
lagg is no longer working.

/etc/rc.conf:
ifconfig_bxe2="up"
ifconfig_bxe3="up"
cloned_interfaces="lagg0"
ifconfig_lagg0="laggproto lacp laggport bxe2 laggport bxe3 129.242.3.9 netmask 
255.255.255.192"


ifconfig lagg0
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether .....
        inet 129.242.3.9 netmask 0xffffffc0 broadcast 129.242.3.63
        nd options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: active
        groups: lagg
        laggproto lacp lagghash l2,l3,l4
        laggport: bge2 flags=0<>
        laggport: bge3 flags=0<>


As you can see the laggport flags are empty where I would expect 
flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
No error messages. The interfaces work ok if I drop using lagg.

The same configuration has survived the upgrade on boxes using bge


Any ideas?


--Ingeborg
-- 
Ingeborg Østrem Hellemo  --  ingeborg.hellemo at uit.no
Dep. of Information Technology  ---  Univ. of Tromsø