CAM timeouts at startup
Mahlon E. Smith
mahlon at martini.nu
Mon Apr 10 17:56:42 UTC 2017
Hi. Got some new machines running 11.0-RELEASE-p8 with a small pile of SSD in them.
Getting some strange CAM timeouts at boot, that dramatically delay
startup times. These errors don't happen at all after boot, everything
seems just fine.
Any clues / tuning suggestions are appreciated.
Relevant stuff from dmesg:
mpr0: <Avago Technologies (LSI) SAS3008> port 0x3000-0x30ff mem 0x92000000-0x9200ffff,0x91f00000-0x91ffffff at device 0.0 numa-domain 0 on pci3
mpr0: IOCFacts :
MsgVersion: 0x205
HeaderVersion: 0x2a00
IOCNumber: 0
IOCExceptions: 0x0
MaxChainDepth: 128
NumberOfPorts: 1
RequestCredit: 9680
ProductID: 0x2221
IOCRequestFrameSize: 32
MaxInitiators: 0
MaxTargets: 544
MaxSasExpanders: 125
MaxEnclosures: 126
HighPriorityCredit: 124
MaxReplyDescriptorPostQueueDepth: 65504
ReplyFrameSize: 32
MaxVolumes: 0
MaxDevHandle: 677
MaxPersistentEntries: 240
mpr0: Firmware: 13.00.00.00, Driver: 13.01.00.00-fbsd
mpr0: IOCCapabilities: 7a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc>
da0 at mpr0 bus 0 scbus0 target 19 lun 0
da0: <ATA SAMSUNG MZ7KM960 GB32> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number S2HTNX0H701448
da0: 1200.000MB/s transfers
da0: Command Queueing enabled
da0: 915715MB (1875385008 512 byte sectors)
da0: quirks=0x8<4K>
mpr0: Sending reset from mprsas_send_abort for target ID 19
mpr0: Unfreezing devq for target ID 19
(da0:mpr0:0:19:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da0:mpr0:0:19:0): CAM status: Command timeout
(da0:mpr0:0:19:0): Retrying command
(da0:mpr0:0:19:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da0:mpr0:0:19:0): CAM status: SCSI Status Error
(da0:mpr0:0:19:0): SCSI status: Check Condition
(da0:mpr0:0:19:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(da0:mpr0:0:19:0): Retrying command (per sense data)
(noperiph:mpr0:0:4294967295:0): SMID 2 Aborting command 0xfffffe00026066c0
mpr0: Sending reset from mprsas_send_abort for target ID 20
mpr0: Unfreezing devq for target ID 20
(da1:mpr0:0:20:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da1:mpr0:0:20:0): CAM status: Command timeout
(da1:mpr0:0:20:0): Retrying command
(da1:mpr0:0:20:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da1:mpr0:0:20:0): CAM status: SCSI Status Error
(da1:mpr0:0:20:0): SCSI status: Check Condition
(da1:mpr0:0:20:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(da1:mpr0:0:20:0): Retrying command (per sense data)
(noperiph:mpr0:0:4294967295:0): SMID 3 Aborting command 0xfffffe0002609750
mpr0: Sending reset from mprsas_send_abort for target ID 21
(da2:mpr0:0:21:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
mpr0: (da2:mpr0:0:21:0): CAM status: Command timeout
Unfreezing devq for target ID 21
(da2:mpr0:0:21:0): Retrying command
(da2:mpr0:0:21:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da2:mpr0:0:21:0): CAM status: SCSI Status Error
(da2:mpr0:0:21:0): SCSI status: Check Condition
(da2:mpr0:0:21:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(da2:mpr0:0:21:0): Retrying command (per sense data)
(noperiph:mpr0:0:4294967295:0): SMID 4 Aborting command 0xfffffe000260c7e0
mpr0: Sending reset from mprsas_send_abort for target ID 22
mpr0: Unfreezing devq for target ID 22
(da3:mpr0:0:22:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da3:mpr0:0:22:0): CAM status: Command timeout
(da3:mpr0:0:22:0): Retrying command
(da3:mpr0:0:22:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da3:mpr0:0:22:0): CAM status: SCSI Status Error
(da3:mpr0:0:22:0): SCSI status: Check Condition
(da3:mpr0:0:22:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(da3:mpr0:0:22:0): Retrying command (per sense data)
(noperiph:mpr0:0:4294967295:0): SMID 5 Aborting command 0xfffffe0002614f10
mpr0: Sending reset from mprsas_send_abort for target ID 25
mpr0: Unfreezing devq for target ID 25
(da6:mpr0:0:25:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da6:mpr0:0:25:0): CAM status: Command timeout
(da6:mpr0:0:25:0): Retrying command
(da6:mpr0:0:25:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da6:mpr0:0:25:0): CAM status: SCSI Status Error
(da6:mpr0:0:25:0): SCSI status: Check Condition
(da6:mpr0:0:25:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(da6:mpr0:0:25:0): Retrying command (per sense data)
(noperiph:mpr0:0:4294967295:0): SMID 6 Aborting command 0xfffffe0002617fa0
mpr0: Sending reset from mprsas_send_abort for target ID 26
mpr0: Unfreezing devq for target ID 26
(da7:mpr0:0:26:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da7:mpr0:0:26:0): CAM status: Command timeout
(da7:mpr0:0:26:0): Retrying command
(da7:mpr0:0:26:0): READ(10). CDB: 28 00 6f c8 1a af 00 00 01 00
(da7:mpr0:0:26:0): CAM status: SCSI Status Error
(da7:mpr0:0:26:0): SCSI status: Check Condition
(da7:mpr0:0:26:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
(da7:mpr0:0:26:0): Retrying command (per sense data)
--
Mahlon E. Smith
http://www.martini.nu/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20170410/c651ce1b/attachment.sig>
More information about the freebsd-stable
mailing list