10.1 NVMe kernel panic
Sean Kelly
smkelly at smkelly.org
Wed Jun 3 03:06:57 UTC 2015
Jim,
Thanks for the reply. I set hw.nvme.force_intx=1 and get a new form of kernel panic:
http://smkelly.org/stuff/nvme_crash_force_intx.txt <http://smkelly.org/stuff/nvme_crash_force_intx.txt>
It looks like the NVMes are just failing to initialize at all now. As long as that tunable is in the kenv, I get this behavior. If I kldload them after boot, the init fails as well. But if I kldunload, kenv -u, kldload, it then works again. The only difference is kldload doesn’t result in a panic, just timeouts initializing them all.
I also compiled and tried stable/10 and it crashed in a similar way, but i’ve not captured the panic yet. It crashes even without the tunable in place. I’ll see if I can capture it.
--
Sean Kelly
smkelly at smkelly.org
http://smkelly.org
> On Jun 2, 2015, at 6:10 PM, Jim Harris <jim.harris at gmail.com> wrote:
>
>
>
> On Thu, May 21, 2015 at 8:33 AM, Sean Kelly <smkelly at smkelly.org <mailto:smkelly at smkelly.org>> wrote:
> Greetings.
>
> I have a Dell R630 server with four of Dell’s 800GB NVMe SSDs running FreeBSD 10.1-p10. According to the PCI vendor, they are some sort of rebranded Samsung drive. If I boot the system and then load nvme.ko and nvd.ko from a command line, the drives show up okay. If I put
> nvme_load=“YES”
> nvd_load=“YES”
> in /boot/loader.conf, the box panics on boot:
> panic: nexus_setup_intr: NULL irq resource!
>
> If I boot the system with “Safe Mode: ON” from the loader menu, it also boots successfully and the drives show up.
>
> You can see a full ‘boot -v’ here:
> http://smkelly.org/stuff/nvme-panic.txt <http://smkelly.org/stuff/nvme-panic.txt> <http://smkelly.org/stuff/nvme-panic.txt <http://smkelly.org/stuff/nvme-panic.txt>>
>
> Anyone have any insight into what the issue may be here? Ideally I need to get this working in the next few days or return this thing to Dell.
>
> Hi Sean,
>
> Can you try adding hw.nvme.force_intx=1 to /boot/loader.conf?
>
> I suspect you are able to load the drivers successfully after boot because interrupt assignments are not restricted to CPU0 at that point - see https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=199321 <https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=199321> for a related issue. Your logs clearly show that vectors were allocated for the first 2 NVMe SSDs, but the third could not get its full allocation. There is a bug in the INTx fallback code that needs to be fixed - you do not hit this bug when loading after boot because bug #199321 only affects interrupt allocation during boot.
>
> If the force_intx test works, would you able to upgrade your nvme drivers to the latest on stable/10? There are several patches (one related to interrupt vector allocation) that have been pushed to stable/10 since 10.1 was released, and I will be pushing another patch for the issue you have reported shortly.
>
> Thanks,
>
> -Jim
>
>
>
>
> Thanks!
>
> --
> Sean Kelly
> smkelly at smkelly.org <mailto:smkelly at smkelly.org>
> http://smkelly.org <http://smkelly.org/>
>
> _______________________________________________
> freebsd-stable at freebsd.org <mailto:freebsd-stable at freebsd.org> mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable <http://lists.freebsd.org/mailman/listinfo/freebsd-stable>
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org <mailto:freebsd-stable-unsubscribe at freebsd.org>"
More information about the freebsd-stable
mailing list