Kbd problem in 10.1-STABLE

[Filippo Moretti]

My kbd (Logitech Deluxe 660 cordless) no longer works after updating 10.1-STABLE from November 24 to December 8.The kernel configuration file is unchanged,the mouse which is on the same receiver works.root at sting:/home/filippo # uname -a
FreeBSD sting 10.1-STABLE FreeBSD 10.1-STABLE #6 r274620: Mon Nov 24 19:02:17 CET 2014     root at sting:/usr/obj/usr/src/sys/STING_VT  i386
I booted kernel.old and everything works.
dmesgCopyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.1-STABLE #6 r274620: Mon Nov 24 19:02:17 CET 2014
    root at sting:/usr/obj/usr/src/sys/STING_VT i386
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT: running with driver "vga".
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.05-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Family = 0xf  Model = 0x4  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
  AMD Features=0x100000<NX>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 3016171520 (2876 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <INTEL  D915PCM >FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP/HT): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: <Software, Yarrow> initialized
acpi0: <INTEL D915PCM> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, b7f00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9800-0x98ff mem 0xc0000000-0xc7ffffff,0xd0000000-0xd000ffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xdf9d0000-0xdf9dffff at device 0.1 on pci1
hdac0: <Intel 82801F HDA Controller> mem 0xdfffc000-0xdfffffff irq 16 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xa800-0xa8ff mem 0xdfdff000-0xdfdfffff,0xcf6fc000-0xcf6fffff irq 16 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: e8:de:27:01:b2:4b
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib5
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xd800-0xd81f irq 16 at device 29.3 on pci0
uhci3: LegSup = 0x2f00
usbus3 on uhci3
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xdfffbc00-0xdfffbfff irq 23 at device 29.7 on pci0
usbus4: waiting for BIOS to give up control
usbus4: timed out waiting for BIOS
usbus4 on ehci0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <multimedia, audio> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
hdacc0: <Realtek ALC880 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC880 Audio Function Group> at nid 1 on hdacc0usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub_attach: Turning port 1 power on
uhub_attach: Turning port 1 power on
uhub_attach: Turning port 1 power on
uhub_attach: Turning port 1 power on
uhub_attach: Turning port 1 power on
uhub_attach: Turning port 2 power on
uhub_attach: Turning port 2 power on
uhub_attach: Turning port 2 power on
uhub_attach: Turning port 2 power on
uhub0: 2 ports with 2 removable, self powereduhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub_attach: Turning port 2 power on
uhub_attach: Turning port 3 power on
uhub_attach: Turning port 4 power on
uhub_attach: Turning port 5 power on
uhub_attach: Turning port 6 power on
uhub_attach: Turning port 7 power on
uhub_attach: Turning port 8 power on
uhub4: 8 ports with 8 removable, self powered
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD5000AZRX-00A8LB0 01.01A01> ATA-8 SATA 3.x device
ada0: Serial Number WD-WCC1UAR3R4CE
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ata3 bus 0 scbus3 target 0 lun 0
ada1: <WDC WD5000AAKS-00A7B0 01.03B01> ATA-8 SATA 2.x device
ada1: Serial Number WD-WMASY0544230
ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
cd0 at ata3 bus 0 scbus3 target 1 lun 0cd0: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1600026116 Hz quality 1000
Trying to mount root from ufs:/dev/ada1p2 [rw]...
ugen3.2: <Logitech> at usbus3
ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 2> on usbus3
kbd0 at ukbd0
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 2> on usbus3
ums0: 10 buttons and [XYZT] coordinates ID=2
Any help appreciatedsincerelyFilippo