svn commit: r267935 - head/sys/dev/e1000

Fri Aug 8 18:57:03 UTC 2014

Hi Jack,
	Not sure if its related to this commit or not, but while doing a 
backup, I noticed this on the server with a wedged NIC

em0: Watchdog timeout -- resetting
em0: Queue(0) tdh = 16, hw tdt = 1000
em0: TX(0) desc avail = 31,Next TX to Clean = 7

0-zoo-# pciconf -lvcb em0
em0 at pci0:4:0:0: class=0x020000 card=0xa01f8086 chip=0x10d38086 rev=0x00 
hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82574L Gigabit Network Connection'
     class      = network
     subclass   = ethernet
     bar   [10] = type Memory, range 32, base 0xfd1c0000, size 131072, 
enabled
     bar   [14] = type Memory, range 32, base 0xfd100000, size 524288, 
enabled
     bar   [18] = type I/O Port, range 32, base 0xc000, size 32, enabled
     bar   [1c] = type Memory, range 32, base 0xfd1e0000, size 16384, 
enabled
     cap 01[c8] = powerspec 2  supports D0 D3  current D0
     cap 05[d0] = MSI supports 1 message, 64 bit
     cap 10[e0] = PCI-Express 1 endpoint max data 128(256) link x1(x1)
                  speed 2.5(2.5) ASPM disabled(L0s/L1)
     cap 11[a0] = MSI-X supports 5 messages, enabled
                  Table in map 0x1c[0x0], PBA in map 0x1c[0x2000]
     ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
     ecap 0003[140] = Serial 1 6805caffff06ee38
0-zoo-#
0-zoo-# vmstat -i | grep m0
irq261: em0:rx 0                  525276        126
irq262: em0:tx 0                  241445         58
irq263: em0:link                    3945          0
0-zoo-#
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xc000-0xc01f mem 
0xfd1c0000-0xfd1dffff,0xfd100000-0x
fd17ffff,0xfd1e0000-0xfd1e3fff irq 48 at device 0.0 on pci4
em0: Using MSIX interrupts with 3 vectors
em0: Ethernet address: 68:05:ca:06:ee:38

I had done several zfs backups on this hardware over nfs before, and 
this is the first time this has happened.

RELENG_10, AMD64 r269724

	---Mike

On 8/6/2014 6:27 PM, Jack Vogel wrote:
> Its done Bob.
>
> Jack
>
>
>
> On Tue, Aug 5, 2014 at 6:01 AM, Bob Willcox <bob at immure.com> wrote:
>
>> That will be Great! Looking forward to it!
>>
>> Bob
>>
>> On Mon, Aug 04, 2014 at 02:33:43PM -0700, Jack Vogel wrote:
>>> Yes, I think I can do that, stay tuned....
>>>
>>> Jack
>>>
>>>
>>>
>>> On Mon, Aug 4, 2014 at 2:22 PM, Bob Willcox <bob at immure.com> wrote:
>>>
>>>> And what about 9-stable? I'm currently running two systems with the new
>>>> I218
>>>> adapters in them and a hacked version of the driver to get them to
>> work.
>>>>   Will
>>>> these changes be MFC'd back to 9-stable?
>>>>
>>>> Bob
>>>>
>>>> On Mon, Jul 28, 2014 at 02:12:15PM -0700, Jack Vogel wrote:
>>>>> Done, thanks for staying on my case Ed :)
>>>>>
>>>>> Jack
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Jul 25, 2014 at 11:03 AM, Ed Maste <emaste at freebsd.org>
>> wrote:
>>>>>
>>>>>>>> On Wed, Jul 16, 2014 at 11:49 PM, Herbert J. Skuhra <
>>>> hskuhra at eumx.net>
>>>>>> wrote:
>>>>>>>>> Den 26.06.2014 23:33, skrev Jack F Vogel:
>>>>>>>>>
>>>>>>>>>> Author: jfv
>>>>>>>>>> Date: Thu Jun 26 21:33:32 2014
>>>>>>>>>> New Revision: 267935
>>>>>>>>>> URL: http://svnweb.freebsd.org/changeset/base/267935
>>>>>>>>>>
>>>>>>>>>> Log:
>>>>>>>>>>    Sync the E1000 shared code with Intel internal, this adds
>>>> fixes,
>>>>>>>>>>    and more importantly, new I218 adapter support to the em
>>>> driver.
>>>>>>>>>>
>>>>>>>>>>    MFC after: 1 week
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Does anyone know when this will be commited to stable/10?
>>>>>>>>> Any open issues with this change?
>>>>>>>
>>>>>>> On 17 July 2014 03:31, Jack Vogel <jfvogel at gmail.com> wrote:
>>>>>>> Will try to squeeze it in between crises next week :)
>>>>>>
>>>>>> Hi Jack - do you think you'll be able to tackle this soon?  It
>> will be
>>>>>> very good to get test exposure in advance of the fast-approaching
>> 10.1
>>>>>> release process.
>>>>>>
>>>>>> Thanks,
>>>>>> Ed
>>>>>>
>>>>> _______________________________________________
>>>>> freebsd-stable at freebsd.org mailing list
>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>>>>> To unsubscribe, send any mail to "
>> freebsd-stable-unsubscribe at freebsd.org
>>>> "
>>>>
>>>> --
>>>> Bob Willcox    | I poured spot remover on my dog.  Now he's gone.
>>>> bob at immure.com |            -- Steven Wright
>>>> Austin, TX     |
>>>>
>>
>> --
>> Bob Willcox    | I poured spot remover on my dog.  Now he's gone.
>> bob at immure.com |            -- Steven Wright
>> Austin, TX     |
>>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>
>

-- 
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike at sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada   http://www.tancsa.com/