Thinkpad R60 hangs when booting recent 8.4-STABLE
Don Lewis
truckman at FreeBSD.org
Tue Apr 29 01:03:29 UTC 2014
I've been upgrading my 8.4-STABLE machines to r264698 and haven't had
any issues until I tried to upgrade my laptop. I was previously running
r259528 without any problems, but it now hangs during boot. It's a hard
hang and the machine doesn't respond to anything, including Caps Lock.
I took a picture of the screen and compared it to dmesg.boot from
booting kernel.old and the boot messages appear to be identical up to
the point where the hang occurs.
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.4-STABLE #51 r259528M: Wed Dec 18 16:44:30 PST 2013
dl at hairball.catspoiler.org:/usr/obj/usr/src/sys/UP_ATAPICAM i386
gcc version 4.2.1 20070831 patched [FreeBSD]
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1500MHz (1498.74-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x695 Family = 6 Model = 9 Stepping = 5
Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Features2=0x180<EST,TM2>
real memory = 1073741824 (1024 MB)
avail memory = 1032552448 (984 MB)
kbd1 at kbdmux0
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20101013/tbfadt-625)
ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20101013/tbfadt-655)
acpi0: <IBM TP-1P> on motherboard
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82855 host to AGP bridge> on hostb0
[Boot hangs here with recent kernel]
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe0000000-0xe7ffffff,0xc0100000-0xc010ffff irq 11 at device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: [ITHREAD]
usbus0 on uhci0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 6 at device 29.1 on pci0
uhci1: [ITHREAD]
usbus1 on uhci1
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 9 at device 29.2 on pci0
uhci2: [ITHREAD]
usbus2 on uhci2
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xc0000000-0xc00003ff irq 9 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
cbb0: <TI1510 PCI-CardBus Bridge> irq 6 at device 0.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
ath0: <Atheros 5212> mem 0xc0200000-0xc020ffff irq 9 at device 2.0 on pci2
ath0: [ITHREAD]
ath0: AR5212 mac 5.9 RF2112 phy 4.3
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xc0215000-0xc02157ff,0xc0210000-0xc0213fff irq 11 at device 7.0 on pci2
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:00:20:09:dc:c3
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x14a0000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:06:1b:09:dc:c3
fwe0: Ethernet address: 02:06:1b:09:dc:c3
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:06:1b:00:20:09:dc:c3 @ 0xfffe00000000, S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
fxp0: <Intel 82801DB (ICH4) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xc0214000-0xc0214fff irq 5 at device 8.0 on pci2
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
fxp0: Ethernet address: 00:06:1b:d4:72:bb
fxp0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata0: [ITHREAD]
ata1: <ATA channel> at channel 1 on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
ppc0: <Parallel port> port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xdc000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
Timecounter "TSC" frequency 1498736259 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ad0: 152627MB <SAMSUNG HM160HC LQ100-10> at ata0-master UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
GEOM: ad0s2: geometry does not match label (255h,63s != 16h,63s).
uhub3: 6 ports with 6 removable, self powered
ugen3.2: <vendor 0x04b3> at usbus3
uhub4: <vendor 0x04b3 product 0x4482, class 9/0, rev 2.00/0.00, addr 2> on usbus3
uhub4: MTT enabled
unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 00 00 00 00 00 00
(probe0:ata1:0:0:0): CAM status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI status: Check Condition
(probe0:ata1:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4240N 0211> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd0: quirks=0x10<10_BYTE_ONLY>
Root mount waiting for: usbus3
uhub4: 4 ports with 4 removable, self powered
ugen3.3: <vendor 0x0b95> at usbus3
axe0: <vendor 0x0b95 product 0x7720, rev 2.00/0.01, addr 3> on usbus3
Trying to mount root from ufs:/dev/ad0s2a
miibus1: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus1
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on axe0
ue0: Ethernet address: 20:aa:4b:45:95:95
wlan0: Ethernet address: 00:16:ce:00:ac:a7
The dmesg contents for a verbose boot looks pretty much the same as
well. Here's an extract from booting the old kernel with the place
where the new kernel hangs flagged:
[SNIP]
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.29.INTA at func 0: 11
ACPI: Found matching pin for 0.29.INTB at func 1: 6
ACPI: Found matching pin for 0.29.INTC at func 2: 9
ACPI: Found matching pin for 0.29.INTD at func 7: 9
ACPI: Found matching pin for 0.31.INTA at func 1: 255
ACPI: Found matching pin for 0.31.INTB at func 3: 10
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x3340, revid=0x03
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled
found-> vendor=0x8086, dev=0x3341, revid=0x03
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24c2, revid=0x01
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type I/O Port, range 32, base 0x1800, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0)
pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
found-> vendor=0x8086, dev=0x24c4, revid=0x01
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=6
map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0)
pcib0: slot 29 INTB routed to irq 6 via \\_SB_.LNKD
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
found-> vendor=0x8086, dev=0x24c7, revid=0x01
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0)
pcib0: slot 29 INTC routed to irq 9 via \\_SB_.LNKC
unknown: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
found-> vendor=0x8086, dev=0x24cd, revid=0x01
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xc0000000, size 10, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0)
pcib0: slot 29 INTD routed to irq 9 via \\_SB_.LNKH
unknown: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc0000000
found-> vendor=0x8086, dev=0x2448, revid=0x81
domain=0, bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24cc, revid=0x01
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24ca, revid=0x01
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type I/O Port, range 32, base 0x1860, size 4, enabled
map[24]: type Memory, range 32, base 0, size 10, memory disabled
found-> vendor=0x8086, dev=0x24c3, revid=0x01
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x24c5, revid=0x01
domain=0, bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x1c00, size 8, enabled
map[14]: type I/O Port, range 32, base 0x18c0, size 6, enabled
map[18]: type Memory, range 32, base 0xc0000c00, size 9, enabled
map[1c]: type Memory, range 32, base 0xc0000800, size 8, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 10 via \\_SB_.LNKB
found-> vendor=0x8086, dev=0x24c6, revid=0x01
domain=0, bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled
map[14]: type I/O Port, range 32, base 0x2000, size 7, enabled
pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0)
pcib0: slot 31 INTB routed to irq 10 via \\_SB_.LNKB
agp0: <Intel 82855 host to AGP bridge> on hostb0
hostb0: Reserved 0x10000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
[Hangs here]
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xc0100000-0xc01fffff
pcib1: prefetched decode 0xe0000000-0xe7ffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 11
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
[SNIP]
There haven't been any recent changes to agp. There were a few changes
to pci two months ago, but they don't look especially suspicious. Any
thoughts before I start bisecting?
More information about the freebsd-stable
mailing list