miibus0: mii_mediachg: can't handle non-zero PHY instance 31

Chris H bsd-lists at bsdforge.com
Tue Apr 1 20:16:28 UTC 2014


> On Mon, Mar 31, 2014 at 07:57:28AM -0700, Chris H wrote:
>> > On Sun, Mar 30, 2014 at 01:12:20PM -0700, chrish at UltimateDNS.NET wrote:
>> >> Greetings,
>> >>  I'm not sure whether this best belonged on net@, or stable@
>> >> so I'm using both. :)
>> >> I'm testing both releng_9, and MB, and I encountered a new
>> >> message I don't usually see using the nfe(4) driver:
>> >>
>> >> miibus0: mii_mediachg: can't handle non-zero PHY instance 1
>> >> ...
>> >> miibus0: mii_mediachg: can't handle non-zero PHY instance 31
>> >>
>> >> Truncated for brevity (31 lines in total; 1-31). I don't know
>> >> how interpret this. An issue with my version of the driver, or
>> >> the hardware itself? This occurred with both GENERIC, as well
>> >> as my custom kernel.
>> >
>> > Would you show me the dmesg output?
>> Happily:
>>
>> Calibrating TSC clock ... TSC clock: 3231132841 Hz
>> CPU: AMD Sempron(tm) 140 Processor (3231.13-MHz K8-class CPU)
>>   Origin = "AuthenticAMD"  Id = 0x100f62  Family = 0x10  Model = 0x6  Stepping = 2
>>   Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
>>   Features2=0x802009<SSE3,MON,CX16,POPCNT>
>>   AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
>>   AMD Features2=0x37fd<LAHF,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
>
> [...]
>
>> nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xe480-0xe487 mem
>> 0xdff7d000-0xdff7dfff
>> irq 20 at device 7.0 on pci0
>> nfe0: attempting to allocate 8 MSI vectors (8 supported)
>> msi: routing MSI IRQ 257 to local APIC 0 vector 56
>> msi: routing MSI IRQ 258 to local APIC 0 vector 57
>> msi: routing MSI IRQ 259 to local APIC 0 vector 58
>> msi: routing MSI IRQ 260 to local APIC 0 vector 59
>> msi: routing MSI IRQ 261 to local APIC 0 vector 60
>> msi: routing MSI IRQ 262 to local APIC 0 vector 61
>> msi: routing MSI IRQ 263 to local APIC 0 vector 62
>> msi: routing MSI IRQ 264 to local APIC 0 vector 63
>> nfe0: using IRQs 257-264 for MSI
>> nfe0: Using 8 MSI messages
>> miibus0: <MII bus> on nfe0
>> rlphy0: <RTL8201L 10/100 media interface> PHY 0 on miibus0
>> rlphy0: OUI 0x000004, model 0x0020, rev. 1
>> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>> rlphy1: <RTL8201L 10/100 media interface> PHY 1 on miibus0
>> rlphy1: OUI 0x000004, model 0x0020, rev. 1
>> rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>
> [...]
>
>> rlphy30: <RTL8201L 10/100 media interface> PHY 30 on miibus0
>> rlphy30: OUI 0x000004, model 0x0020, rev. 1
>> rlphy30:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>> rlphy31: <RTL8201L 10/100 media interface> PHY 31 on miibus0
>> rlphy31: OUI 0x000004, model 0x0020, rev. 1
>> rlphy31:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
>> nfe0: bpf attached
>> nfe0: Ethernet address: 40:61:86:cd:44:97
>
> mii(4) thinks it has 32 PHYs and this is the reason why mii(4)
> complains.  Due to unknown reason, accessing PHY registers in
> device probe stage got valid response which in turn makes the
> driver think there are 32 PHYs.  Did you ever see this this kind of
> message on old FreeBSD release? Or could you try cold-boot and see
> whether it makes any difference?
Greetings, and thank you for taking the time to respond.
I downloaded, and booted to the 8.4-memstick. Droped to FIXIT, and
captured the dmesg(8) output. I don't know how much of it you need,
so I am including it all:

Table 'FACP' at 0x6ffa0200
Table 'APIC' at 0x6ffa0390
APIC: Found table at 0x6ffa0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 129 ACPI ID 2: disabled
MADT: Found CPU APIC ID 130 ACPI ID 3: disabled
MADT: Found CPU APIC ID 131 ACPI ID 4: disabled
MADT: Found CPU APIC ID 132 ACPI ID 5: disabled
MADT: Found CPU APIC ID 133 ACPI ID 6: disabled
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.4-RELEASE #0 r251259: Sun Jun  2 21:26:57 UTC 2013
    root at bake.isc.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff8146d000.
Preloaded mfs_root "/boot/mfsroot" at 0xffffffff8146d200.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3231096596 Hz
CPU: AMD Sempron(tm) 140 Processor (3231.10-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x100f62  Family = 10  Model = 6  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x37fd<LAHF,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
  TSC: P-state invariant
L1 2MB data TLB: 48 entries, fully associative
L1 2MB instruction TLB: 16 entries, fully associative
L1 4KB data TLB: 48 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB data TLB: 128 entries, 2-way associative
L2 2MB instruction TLB: 0 entries, 2-way associative
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x000000000149a000 - 0x000000006cac6fff, 1801637888 bytes (439853 pages)
avail memory = 1787707392 (1704 MB)
ACPI APIC Table: <7309MS A7309200>
x86bios:   IVT 0x000000-0x0004ff at 0xffffff0000000000
x86bios:  SSEG 0x010000-0x01ffff at 0xffffff8000006000
x86bios:  EBDA 0x09f000-0x09ffff at 0xffffff000009f000
x86bios:   ROM 0x0a0000-0x0effff at 0xffffff00000a0000
APIC: CPU 0 has ACPI ID 1
ULE: setup cpu 0
ACPI: RSDP 0xfaab0 00014 (v00 ACPIAM)
ACPI: RSDT 0x6ffa0000 00048 (v01 7309MS A7309200 20101122 MSFT 00000097)
ACPI: FACP 0x6ffa0200 00084 (v01 7309MS A7309200 20101122 MSFT 00000097)
ACPI: DSDT 0x6ffa04b0 0503B (v01  A7309 A7309200 00000200 INTL 20051117)
ACPI: FACS 0x6ffae000 00040
ACPI: APIC 0x6ffa0390 00090 (v01 7309MS A7309200 20101122 MSFT 00000097)
ACPI: MCFG 0x6ffa0420 0003C (v01 7309MS OEMMCFG  20101122 MSFT 00000097)
ACPI: WDRT 0x6ffa0460 00047 (v01 7309MS NV-WDRT  20101122 MSFT 00000097)
ACPI: OEMB 0x6ffae040 00072 (v01 7309MS A7309200 20101122 MSFT 00000097)
ACPI: SRAT 0x6ffaa4b0 00090 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
ACPI: MSCT 0x6ffaa540 0004E (v01 A M I  OEMBOARD 00000001 AMD  00000001)
ACPI: HPET 0x6ffaa590 00038 (v01 7309MS OEMHPET0 20101122 MSFT 00000097)
ACPI: SSDT 0x6ffaa5d0 0023E (v01 A M I  POWERNOW 00000001 AMD  00000001)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
MADT: Interrupt override: source 14, irq 14
MADT: Interrupt override: source 15, irq 15
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
null: <null device, zero device>
hpt27xx: RocketRAID 27xx controller driver v1.0
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <7309MS A7309200> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
ACPI timer: 0/3 1/2 0/3 1/2 1/2 1/2 0/3 1/2 1/2 0/3 -> 6
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
ACPI: Processor \\_PR_.P002 (ACPI ID 2) ignored
ACPI: Processor \\_PR_.P003 (ACPI ID 3) ignored
ACPI: Processor \\_PR_.P004 (ACPI ID 4) ignored
ACPI: Processor \\_PR_.P005 (ACPI ID 5) ignored
ACPI: Processor \\_PR_.P006 (ACPI ID 6) ignored
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  16 17 18 19
  Validation          0  255   N     0  16 17 18 19
  After Disable       0  255   N     0  16 17 18 19
pci_link8:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link9:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link10:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link11:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link12:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link13:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link14:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link15:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link16:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pci_link17:       Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  20 21 22 23
  Validation          0  255   N     0  20 21 22 23
  After Disable       0  255   N     0  20 21 22 23
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x10de, dev=0x03ea, revid=0xa1
	domain=0, bus=0, slot=0, func=0
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03e0, revid=0xa2
	domain=0, bus=0, slot=1, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type I/O Port, range 32, base 0x4f00, size  8, enabled
found->	vendor=0x10de, dev=0x03eb, revid=0xa2
	domain=0, bus=0, slot=1, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0x4900, size  6, enabled
	map[20]: type I/O Port, range 32, base 0x4d00, size  6, enabled
	map[24]: type I/O Port, range 32, base 0x4e00, size  6, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.LSMB:0)
pci_link13: Picked IRQ 20 with weight 0
pcib0: slot 1 INTA routed to irq 20 via \\_SB_.LSMB
found->	vendor=0x10de, dev=0x03f5, revid=0xa2
	domain=0, bus=0, slot=1, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x03f1, revid=0xa3
	domain=0, bus=0, slot=2, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xdff7f000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.LUB0:0)
pci_link8: Picked IRQ 21 with weight 0
pcib0: slot 2 INTA routed to irq 21 via \\_SB_.LUB0
unknown: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdff7f000
ohci early: SMM active, request owner change
found->	vendor=0x10de, dev=0x03f2, revid=0xa3
	domain=0, bus=0, slot=2, func=1
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xdff7ec00, size  8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.LUB2:0)
pci_link9: Picked IRQ 22 with weight 0
pcib0: slot 2 INTB routed to irq 22 via \\_SB_.LUB2
unknown: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdff7ec00
found->	vendor=0x10de, dev=0x03f3, revid=0xa1
	domain=0, bus=0, slot=4, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0004, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x02 (500 ns)
found->	vendor=0x10de, dev=0x03f0, revid=0xa2
	domain=0, bus=0, slot=5, func=0
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=b, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit, vector masks
	map[10]: type Memory, range 32, base 0xdff78000, size 14, enabled
pcib0: matched entry for 0.5.INTB (src \\_SB_.LAZA:0)
pci_link11: Picked IRQ 23 with weight 0
pcib0: slot 5 INTB routed to irq 23 via \\_SB_.LAZA
found->	vendor=0x10de, dev=0x03ec, revid=0xa2
	domain=0, bus=0, slot=6, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type I/O Port, range 32, base 0xffa0, size  4, enabled
found->	vendor=0x10de, dev=0x03ef, revid=0xa2
	domain=0, bus=0, slot=7, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 8 messages, 64 bit, vector masks
	map[10]: type Memory, range 32, base 0xdff7d000, size 12, enabled
	map[14]: type I/O Port, range 32, base 0xe480, size  3, enabled
pcib0: matched entry for 0.7.INTA (src \\_SB_.LMAC:0)
pci_link10: Picked IRQ 20 with weight 1
pcib0: slot 7 INTA routed to irq 20 via \\_SB_.LMAC
found->	vendor=0x10de, dev=0x03f6, revid=0xa2
	domain=0, bus=0, slot=8, func=0
	class=01-01-85, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0xe400, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xe080, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xe000, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xdc00, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xd880, size  4, enabled
	map[24]: type Memory, range 32, base 0xdff7c000, size 12, enabled
pcib0: matched entry for 0.8.INTA (src \\_SB_.LSA0:0)
pci_link15: Picked IRQ 21 with weight 1
pcib0: slot 8 INTA routed to irq 21 via \\_SB_.LSA0
found->	vendor=0x10de, dev=0x03f6, revid=0xa2
	domain=0, bus=0, slot=8, func=1
	class=01-01-85, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0xd800, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xd480, size  2, enabled
	map[18]: type I/O Port, range 32, base 0xd400, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0xd080, size  2, enabled
	map[20]: type I/O Port, range 32, base 0xd000, size  4, enabled
	map[24]: type Memory, range 32, base 0xdff77000, size 12, enabled
pcib0: matched entry for 0.8.INTB (src \\_SB_.LSA1:0)
pci_link16: Picked IRQ 22 with weight 1
pcib0: slot 8 INTB routed to irq 22 via \\_SB_.LSA1
found->	vendor=0x10de, dev=0x03e8, revid=0xa2
	domain=0, bus=0, slot=9, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
found->	vendor=0x10de, dev=0x03e9, revid=0xa2
	domain=0, bus=0, slot=11, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
found->	vendor=0x10de, dev=0x03e9, revid=0xa2
	domain=0, bus=0, slot=12, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0004, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	MSI supports 2 messages, 64 bit
found->	vendor=0x10de, dev=0x03d0, revid=0xa2
	domain=0, bus=0, slot=13, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xde000000, size 24, enabled
	map[14]: type Prefetchable Memory, range 64, base 0xc0000000, size 28, enabled
	map[1c]: type Memory, range 64, base 0xdd000000, size 24, enabled
pcib0: matched entry for 0.13.INTA (src \\_SB_.LMC9:0)
pci_link12: Picked IRQ 23 with weight 1
pcib0: slot 13 INTA routed to irq 23 via \\_SB_.LMC9
found->	vendor=0x1022, dev=0x1200, revid=0x00
	domain=0, bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1201, revid=0x00
	domain=0, bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1202, revid=0x00
	domain=0, bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1203, revid=0x00
	domain=0, bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1204, revid=0x00
	domain=0, bus=0, slot=24, func=4
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x4f00-0x4fff at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
pci0: <memory, RAM> at device 1.2 (no driver attached)
ohci0: <nVidia nForce MCP61 USB Controller> mem 0xdff7f000-0xdff7ffff irq 21 at device 2.0
on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 49
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0 on ohci0
usbus0: bpf attached
ohci0: usbpf: Attached
ehci0: <NVIDIA nForce MCP61 USB 2.0 controller> mem 0xdff7ec00-0xdff7ecff irq 22 at device
2.1 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50
ehci0: [MPSAFE]
ehci0: [ITHREAD]
ehci0: Doorbell workaround enabled
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: bpf attached
ehci0: usbpf: Attached
pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   no prefetched decode
pcib1:   Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
pci0: <multimedia, HDA> at device 5.0 (no driver attached)
atapci0: <nVidia nForce MCP61 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0
ata0: <ATA channel> at channel 0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=50 devices=0x3
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel> at channel 1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xe480-0xe487 mem 0xdff7d000-0xdff7dfff
irq 20 at device 7.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xdff7d000
nfe0: attempting to allocate 8 MSI vectors (8 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 56
msi: routing MSI IRQ 257 to local APIC 0 vector 57
msi: routing MSI IRQ 258 to local APIC 0 vector 58
msi: routing MSI IRQ 259 to local APIC 0 vector 59
msi: routing MSI IRQ 260 to local APIC 0 vector 60
msi: routing MSI IRQ 261 to local APIC 0 vector 61
msi: routing MSI IRQ 262 to local APIC 0 vector 62
msi: routing MSI IRQ 263 to local APIC 0 vector 63
nfe0: using IRQs 256-263 for MSI
nfe0: Using 8 MSI messages
miibus0: <MII bus> on nfe0
rlphy0: <RTL8201L 10/100 media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy1: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy2: <RTL8201L 10/100 media interface> PHY 2 on miibus0
rlphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy3: <RTL8201L 10/100 media interface> PHY 3 on miibus0
rlphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy4: <RTL8201L 10/100 media interface> PHY 4 on miibus0
rlphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy5: <RTL8201L 10/100 media interface> PHY 5 on miibus0
rlphy5:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy6: <RTL8201L 10/100 media interface> PHY 6 on miibus0
rlphy6:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy7: <RTL8201L 10/100 media interface> PHY 7 on miibus0
rlphy7:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy8: <RTL8201L 10/100 media interface> PHY 8 on miibus0
rlphy8:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy9: <RTL8201L 10/100 media interface> PHY 9 on miibus0
rlphy9:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy10: <RTL8201L 10/100 media interface> PHY 10 on miibus0
rlphy10:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy11: <RTL8201L 10/100 media interface> PHY 11 on miibus0
rlphy11:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy12: <RTL8201L 10/100 media interface> PHY 12 on miibus0
rlphy12:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy13: <RTL8201L 10/100 media interface> PHY 13 on miibus0
rlphy13:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy14: <RTL8201L 10/100 media interface> PHY 14 on miibus0
rlphy14:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy15: <RTL8201L 10/100 media interface> PHY 15 on miibus0
rlphy15:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy16: <RTL8201L 10/100 media interface> PHY 16 on miibus0
rlphy16:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy17: <RTL8201L 10/100 media interface> PHY 17 on miibus0
rlphy17:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy18: <RTL8201L 10/100 media interface> PHY 18 on miibus0
rlphy18:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy19: <RTL8201L 10/100 media interface> PHY 19 on miibus0
rlphy19:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy20: <RTL8201L 10/100 media interface> PHY 20 on miibus0
rlphy20:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy21: <RTL8201L 10/100 media interface> PHY 21 on miibus0
rlphy21:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy22: <RTL8201L 10/100 media interface> PHY 22 on miibus0
rlphy22:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy23: <RTL8201L 10/100 media interface> PHY 23 on miibus0
rlphy23:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy24: <RTL8201L 10/100 media interface> PHY 24 on miibus0
rlphy24:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy25: <RTL8201L 10/100 media interface> PHY 25 on miibus0
rlphy25:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy26: <RTL8201L 10/100 media interface> PHY 26 on miibus0
rlphy26:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy27: <RTL8201L 10/100 media interface> PHY 27 on miibus0
rlphy27:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy28: <RTL8201L 10/100 media interface> PHY 28 on miibus0
rlphy28:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy29: <RTL8201L 10/100 media interface> PHY 29 on miibus0
rlphy29:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy30: <RTL8201L 10/100 media interface> PHY 30 on miibus0
rlphy30:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
rlphy31: <RTL8201L 10/100 media interface> PHY 31 on miibus0
rlphy31:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
nfe0: bpf attached
nfe0: Ethernet address: 40:61:86:cd:44:97
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
nfe0: [MPSAFE]
nfe0: [FILTER]
atapci1: <nVidia nForce MCP61 SATA300 controller> port
0xe400-0xe407,0xe080-0xe083,0xe000-0xe007,0xdc00-0xdc03,0xd880-0xd88f mem
0xdff7c000-0xdff7cfff irq 21 at device 8.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd880
atapci1: [MPSAFE]
atapci1: [ITHREAD]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xdff7c000
ata2: <ATA channel> at channel 0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe400
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe080
ata2: SATA connect timeout status=00000000
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel> at channel 1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe000
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xdc00
ata3: SATA connect timeout status=00000000
ata3: [MPSAFE]
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP61 SATA300 controller> port
0xd800-0xd807,0xd480-0xd483,0xd400-0xd407,0xd080-0xd083,0xd000-0xd00f mem
0xdff77000-0xdff77fff irq 22 at device 8.1 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd000
atapci2: [MPSAFE]
atapci2: [ITHREAD]
atapci2: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xdff77000
ata4: <ATA channel> at channel 0 on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd800
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd480
ata4: SATA connect timeout status=00000000
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel> at channel 1 on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd400
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd080
ata5: SATA connect timeout status=00000000
ata5: [MPSAFE]
ata5: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib4:   domain            0
pcib4:   secondary bus     4
pcib4:   subordinate bus   4
pcib4:   no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
vgapci0: <VGA-compatible display> mem
0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xdd000000-0xddffffff irq 23 at device 13.0 on
pci0
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 53
uart0: [FILTER]
uart0: fast interrupt
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 54
ppc0: [MPSAFE]
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
plip0: [MPSAFE]
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [MPSAFE]
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_hpet0: <High Precision Event Timer> iomem 0xfeff0000-0xfeff0fff on acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 3 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x83ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 64
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
acpi0: wakeup code va 0xffffff80001b1000 pa 0x4000
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 119670248 Hz
Timecounter "TSC" frequency 3231096596 Hz quality 800
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hpt27xx: no controller detected.
hptrr: no controller detected.
ata0: Identifying devices: 00000003
ata0: New devices: 00000003
md0: Preloaded image </boot/mfsroot> 4194304 bytes at 0xffffffff8106b700
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: setting UDMA100
ad0: 19541MB <Maxtor 2B020H1 WAH21PB0> at ata0-master UDMA100
ad0: 40020624 sectors [39703C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
ad0: nVidia check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad1: setting UDMA100
ad1: 39266MB <IC35L040AVVN07 0 VA2OAG0A> at ata0-slave UDMA100
ad1: 80418240 sectors [79780C/16H/63S] 16 sectors/interrupt 1 depth queue
ad1: nVidia check1 failed
ad1: Adaptec check1 failed
ad1: LSI (v3) check1 failed
ad1: LSI (v2) check1 failed
ad1: FreeBSD check1 failed
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000000
ata2: New devices: 00000000
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
ata4: Identifying devices: 00000000
ata4: New devices: 00000000
ata5: Identifying devices: 00000000
ata5: New devices: 00000000
ATA PseudoRAID loaded
GEOM: new disk ad1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub1: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
ugen1.2: <HP> at usbus1
umass0: <HP v165w, class 0/0, rev 2.00/16.38, addr 2> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:0:0:-1: Attached to scbus0
Trying to mount root from ufs:/dev/md0
pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
pass0: <hp v165w 1638> Removable Direct Access SCSI-4 device
pass0: Serial Number AA28014000000354
pass0: 40.000MB/s transfers
GEOM: new disk da0
start_init: trying /sbin/initda0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <hp v165w 1638> Removable Direct Access SCSI-4 device
da0: Serial Number AA28014000000354
da0: 40.000MB/s transfers
da0: 15600MB (31950720 512 byte sectors: 255H 63S/T 1988C)

start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
GEOM: da0: media size does not match label.
miibus0: mii_mediachg: can't handle non-zero PHY instance 31
miibus0: mii_mediachg: can't handle non-zero PHY instance 30
miibus0: mii_mediachg: can't handle non-zero PHY instance 29
miibus0: mii_mediachg: can't handle non-zero PHY instance 28
miibus0: mii_mediachg: can't handle non-zero PHY instance 27
miibus0: mii_mediachg: can't handle non-zero PHY instance 26
miibus0: mii_mediachg: can't handle non-zero PHY instance 25
miibus0: mii_mediachg: can't handle non-zero PHY instance 24
miibus0: mii_mediachg: can't handle non-zero PHY instance 23
miibus0: mii_mediachg: can't handle non-zero PHY instance 22
miibus0: mii_mediachg: can't handle non-zero PHY instance 21
miibus0: mii_mediachg: can't handle non-zero PHY instance 20
miibus0: mii_mediachg: can't handle non-zero PHY instance 19
miibus0: mii_mediachg: can't handle non-zero PHY instance 18
miibus0: mii_mediachg: can't handle non-zero PHY instance 17
miibus0: mii_mediachg: can't handle non-zero PHY instance 16
miibus0: mii_mediachg: can't handle non-zero PHY instance 15
miibus0: mii_mediachg: can't handle non-zero PHY instance 14
miibus0: mii_mediachg: can't handle non-zero PHY instance 13
miibus0: mii_mediachg: can't handle non-zero PHY instance 12
miibus0: mii_mediachg: can't handle non-zero PHY instance 11
miibus0: mii_mediachg: can't handle non-zero PHY instance 10
miibus0: mii_mediachg: can't handle non-zero PHY instance 9
miibus0: mii_mediachg: can't handle non-zero PHY instance 8
miibus0: mii_mediachg: can't handle non-zero PHY instance 7
miibus0: mii_mediachg: can't handle non-zero PHY instance 6
miibus0: mii_mediachg: can't handle non-zero PHY instance 5
miibus0: mii_mediachg: can't handle non-zero PHY instance 4
miibus0: mii_mediachg: can't handle non-zero PHY instance 3
miibus0: mii_mediachg: can't handle non-zero PHY instance 2
miibus0: mii_mediachg: can't handle non-zero PHY instance 1

As you can see, it looks much the same. I have no idea what
I should do to better inform the driver/kernel how to better
handle it. Or is it the driver, itself?

Thank you again, for your thoughtful response.

--Chris

>



More information about the freebsd-stable mailing list