SunFire X2200 ilo's bge1 DOWN/UP

[YongHyeon PYUN]

On Fri, May 24, 2013 at 05:31:13PM +0300, Daniel Braniss wrote:
> hi, after upgrading to 9.1-stable, this particular hardware - SunFire X2200,

Show me dmesg(bge(4) and brgphy(4) only) and 'ifconfig bge1' output.

> is toggeling bge1 DOWN/UP every few hours, this port is being used by the ILO.
> To check, I upgraded another identical host, and the same problem appears. 

What is the last known working revision?

> There
> is not correlation with time, since they happend at totaly different times.
> I rebooted both hosts at almost the same time.
> one host :
> uptime: 5:24PM  up  6:15, 0 users, load averages: 0.00, 0.00, 0.00
> May 24 12:53:52 sf-04 kernel: bge1: link state changed to DOWN
> May 24 12:53:55 sf-04 kernel: bge1: link state changed to UP
> May 24 15:34:25 sf-04 kernel: bge1: link state changed to DOWN
> May 24 15:34:28 sf-04 kernel: bge1: link state changed to UP
> 
> and
> uptime: 5:24PM  up  6:14, 0 users, load averages: 0.00, 0.00, 0.00
> 
> May 24 16:30:44 sf-10 kernel: bge1: link state changed to DOWN
> May 24 16:30:44 sf-10 kernel: bge1: link state changed to UP
> 
> this is not serious, the ilo (ssh) connection is ok, but it's anoying, we have 
> more
> than 10 of this hosts, and if I upgrade all of them, the logs will fill up
> with this :-)
> 
> any ideas?
> 
> cheers,
> 	danny